Hi, So if I am using the HTTP connection to the modem pool, my configuration for the smsc should be like the following?
group = smsc smsc = at modemtype = auto device = rawtcp host = <some IP Address> port = <some port number> ... Dennis > Date: Mon, 15 Jun 2009 12:47:40 +0200 > Subject: Re: Using kannel with GSM Modem pool > From: [email protected] > To: [email protected] > CC: [email protected] > > Hi Dennis, > > as RJ45 is a standard network cable, you should check what type of > protocol the GSM pool has enabled. > For example, if the GSM pool has a HTTP microserver to receive > requests, you can use kannel http SMSC to transmit requests to it. > > Julien > > 2009/6/15 Dennis Low Weng Kin <[email protected]>: > > Hi, > > > > I read about a piece of hardware called the GSM Modem pool. It is consists > > of 8 GSM module combined together into a single casing and it is connected > > to the PC through a RJ45 cable. I am planning to buy the GSM Modem pool but > > I am not sure whether kannel can support it. > > Therefore, my question is: > > > > Does anybody out there have experience with Kannel and a GSM Modem pool? Is > > it possible? > > If possible, how do I edit the configuration file to use kannel with it? > > > > Thanks in advance. > > > > > > Regards, > > Dennis Low > > > > ________________________________ > > What can you do with the new Windows Live? Find out > > > > -- > Julien Buratto _________________________________________________________________ What can you do with the new Windows Live? Find out http://www.microsoft.com/windows/windowslive/default.aspx
