Yes. I have not tried it myself (that's why I used the relative term "you
might try"), but this was I believe your reponse to a mail in a similar
situation.... Is that wrong?
Nikos
----- Original Message -----
From: "Alvaro Cornejo" <cornejo.alv...@gmail.com>
To: "info.ubichip" <info.ubic...@free.fr>
Cc: <users@kannel.org>
Sent: Wednesday, February 17, 2010 6:57 AM
Subject: Re: Telnet device
Did you tried "^M" carret char plus M char ?? This is a sort of
character representation of a carriage return...
Regards
Alvaro
On Tue, Feb 16, 2010 at 5:01 PM, info.ubichip <info.ubic...@free.fr> wrote:
In this modem, you could have both in the same telnet session, you just
have
to tell to the modem to go in the AT mode, which is done by entering the
command 'module' and then we are in full AT command.
So I got two issues :
- first to tell kannel to connect to it with the correct
login/password which looks to be not the cas
- second, I have to tell the modem to go in the AT mode, which I
assume I could do it by passing the command in the init-string of the
modem
(as soon as the init-string accept the carriage return).
If you have any tricks to help me for the first point ?
Thanks in advance
-----Original Message-----
From: Alvaro Cornejo [mailto:cornejo.alv...@gmail.com]
Sent: mardi 16 février 2010 11:02
To: info.ubichip
Cc: users@kannel.org
Subject: Re: Telnet device
I don´t know your modem, but in the cases I know, port 23 is for managing
the modem configs and such.
For using AT interface they usually use a different port. with the same
Telnet protocol... something like Telnet host:2100
Regards
|---------------------------------------------------------------------------
--------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel en el Perú, México y en mas de 180 paises. Use
aplicaciones
2 vias via SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Tue, Feb 16, 2010 at 1:06 PM, info.ubichip <info.ubic...@free.fr>
wrote:
Hello,
Does someone got similar issue ?
Regards
-----Original Message-----
From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On
Behalf Of info.ubichip
Sent: lundi 15 février 2010 13:49
To: users@kannel.org
Subject: Using Portech modem
Hello All,
I would like to use a portech GSM gateway MV-370 on a kannel 1.4.3
version, I'm able to send basic sms by hand using telnet as the following
example :
Telnet 192.168.1.121
username:voip
password:****
User level = admin
Command : logout,module,module1,module2
module
Getting module 1..
Got!! Press 'ctrl-x' to release module 1.
at+cmgf=1
OK
At+cmgs="1122334455"
test
+CMGS:30
So I make a configuration in kannel as follow :
group = smsc
smsc = at
smsc-id = portech
allowed-smsc-id = portech
log-level = 0
log-file = "/var/log/kannel/portech.log"
device = telnet
host = 192.168.1.121
port = 23
login-prompt = "username:"
password-prompt = "password:"
smsc-username = "voip"
smsc-password = "1234"
modemtype = portech
validityperiod = 172
keepalive = 10
my-number = 0012345678
sim-buffering = true
I got the following error, it is like the telnet session is not
initialized correctly :
2010-02-15 13:43:50 [32013] [8] INFO: AT2[portech]: trying to use
speed <115200> from modem definition
2010-02-15 13:43:50 [32013] [8] INFO: AT2[portech]: opening device
2010-02-15 13:43:50 [32013] [8] DEBUG: Connecting to <192.168.1.121>
2010-02-15 13:43:50 [32013] [8] DEBUG: AT2[portech]: device opened.
Telnet mode = 1
2010-02-15 13:43:50 [32013] [8] DEBUG: AT2[portech]: --> ^M
2010-02-15 13:43:52 [32013] [8] DEBUG: AT2[portech]: --> AT^M
2010-02-15 13:43:57 [32013] [8] DEBUG: AT2[portech]: <-- username: AT
2010-02-15 13:44:03 [32013] [8] DEBUG: AT2[portech]: --> AT^M
2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- password: **
2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- bad username
or password!!!
2010-02-15 13:44:08 [32013] [8] DEBUG: AT2[portech]: <-- exit...
2010-02-15 13:44:12 [32013] [8] DEBUG: AT2[portech]: --> AT^M
2010-02-15 13:44:21 [32013] [8] INFO: AT2[portech]: Closing device
2010-02-15 13:44:21 [32013] [8] INFO: AT2[portech]: speed in modem
definition don't work, will autodetect
Does someone got similar issue with this type of modem ?
My second question is : as you could see after the telnet connection,
I have to specify the command 'module' to get full access to the AT
command of the modem, does there is a way to put it in the init-string
in the modem definition ? If yes how to send a carriage return in the
init-string parameter (I have already some AT+CNMI....' command to
process.
Thanks in advance for your help
--
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
