What do you get if you send AT+CNMI=? (in hyper terminal or as an init string in Kannel).
- If you get an error: Probably you are out of luck and your phone doesn't support relaying messages to the TE. Try another phone as modem. - If you get a string like: +CNMI: (0,1,2,3),(0,1,2,3),(0,2),(0,1,2),(0,1) then try to get the best options, e.g.: AT+CNMI=3,1,0,2,0 (in this case), depending on the values returned. From: Ahmad Pakhri Yahya [mailto:pakhri.ya...@ymail.com] Sent: dinsdag 18 mei 2010 11:30 To: 'Rene Kluwen'; users@kannel.org Subject: RE: Problem getting Kannel to receive SMS Hi Rene, I tried adding the AT+CNMI= command, but it gave me error during initialization. Messages from the log. 2010-05-18 16:25:28 [31637] [6] DEBUG: AT2[nokiaphone]: --> ATZ^M 2010-05-18 16:25:28 [31637] [6] DEBUG: AT2[nokiaphone]: <-- OK 2010-05-18 16:25:28 [31637] [6] DEBUG: AT2[nokiaphone]: --> AT^M 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- AT 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- OK 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: --> AT&F^M 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- AT&F 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- OK 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: --> ATE0^M 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- ATE0 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- OK 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: --> AT+IFC=2,2^M 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- OK 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: --> AT+CPIN?^M 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- +CPIN: READY 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- OK 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: --> AT+CMGF=0^M 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- OK 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: --> AT+CSMS=?^M 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- +CSMS: (0) 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- OK 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: --> AT+CNMI=0,0,0,0,0^M 2010-05-18 16:25:29 [31637] [6] DEBUG: AT2[nokiaphone]: <-- ERROR 2010-05-18 16:25:29 [31637] [6] ERROR: AT2[nokiaphone]: Generic error: ERROR 2010-05-18 16:25:29 [31637] [6] ERROR: AT2[nokiaphone]: Initialization of device failed. 2010-05-18 16:25:29 [31637] [6] INFO: AT2[nokiaphone]: Closing device 2010-05-18 16:25:29 [31637] [6] ERROR: AT2[nokiaphone]: Couldn't connect (retrying in 10 seconds). Cheers, Ahmad Pakhri Yahya From: Rene Kluwen [mailto:rene.klu...@chimit.nl] Sent: Tue, 18 May, 2010 17:09 To: pakhri.ya...@ymail.com; users@kannel.org Subject: RE: Problem getting Kannel to receive SMS Check your init string and in particular AT+CNMI=.. This setting will let your phone notify if there is any incoming message to Kannel. There's a few options you have there. Depending on which settings your phone supports (not sure about the 5610). From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On Behalf Of Ahmad Pakhri Yahya Sent: dinsdag 18 mei 2010 10:58 To: users@kannel.org Subject: Problem getting Kannel to receive SMS Hi, I'm new to Kannel and am having problem to get Kannel to receive SMS from the phone. Currently it's running on Ubuntu and using Nokia 5610 as the modem. I have no problem sending sms through kannel, but receiving SMS is still unsuccessful. No messages in the log (bearer or sms) regarding received sms, which I suspect that kannel is not being notified by the phone about the sms. How do I get the phone to inform Kannel about the SMS received. Below is my config. # HTTP administration is disabled by default. Make sure you set the # password if you enable it. group = core admin-port = 13000 admin-password = bar admin-deny-ip = "*.*.*.*" admin-allow-ip = "127.0.0.1" admin-allow-ip = "192.168.1.16" log-file = "/var/log/kannel/bearerbox.log" log-level = 0 smsbox-port = 13001 box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" box-allow-ip = "192.168.1.16" #store-file="/etc/kannel/kannel.store" # SMSC group = smsc smsc = at modemtype = nokiaphone device = /dev/ttyACM6 #device = /dev/ttyS0 speed = 0 smsc-id = nokiaphone port = 13013 log-level = 0 log-file = "/var/log/kannel/smsbox.log" #sim-buffering = true # Nokia mobile phone setup group = modems id = nokiaphone name = "Nokia 6500 config" detect-string="Nokia" detect-string2="Nokia 6500" init-string = "ATZ" #init-string = "AT+CMGF=1" #init-string = "AT+CNMI=1,2,0,0,0" #init-string = "AT+CNMI=?" #init-string = "AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" #speed = 19200 enable-hwhs = "AT+IFC=2,2" message-storage = "SM" need-sleep=true keepalive-cmd="AT+CBC;+CSQ" group = smsbox smsbox-id = smsbox bearerbox-host = localhost sendsms-port = 13013 global-sender = 13013 log-level=0 log-file = "/var/log/kannel/smsbox.log" sendsms-chars="0123456789 +-" access-log = "/var/log/kannel/access.log" group = smsbox-route smsbox-id = smsbox smsc-id = nokiaphone # SEND-SMS USERS group = sendsms-user username = kanneluser password = kannelpass max-messages = 10 concatenation = true # SMS Service group = sms-service keyword = default #keyword-regex = .* catch-all = yes #max-messages = 10 #concatenation = true get-url = "http://localhost/test"; #exec /home/brite/watcer/stopwatch omit-empty = true accept-x-kannel-headers = true Please help me to read the SMS from the phone. Thank you. Regards, Ahmad Pakhri Yahya
