Once again. Please read UG. It details all these issues. Don't expect us to
rewrite it here, just for you.
BR,
Nikos
----- Original Message -----
From: "Martin" <mazgac...@gmx.at>
To: "'Alvaro Cornejo'" <cornejo.alv...@gmail.com>
Cc: <users@kannel.org>
Sent: Thursday, October 07, 2010 12:10 PM
Subject: AW: Siemens TC35i built in coM.sat ISDN Plus 2
Hi!
CMEE=1 or 2 should be the init string correct?
I tried both but only get a generic error - maybe kannel is not talking to
one of the two built in TC35i.
Logfile:
2010-10-07 10:30:49 [2739] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CMEE=2^M
2010-10-07 10:30:49 [2739] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-07 10:30:49 [2739] [6] INFO: AT2[/dev/ttyS1]: AT SMSC successfully
opened.
2010-10-07 10:30:59 [2739] [6] DEBUG: AT2[/dev/ttyS1]: <-- ERROR
2010-10-07 10:30:59 [2739] [6] ERROR: AT2[/dev/ttyS1]: Generic error: ERROR
Is there some information available how to "write/build" a new "driver"?
I think the main problem is that the comsat device isn’t built to be a sms
gateway - yes it can send sms via rs232 but normally it is used to be a 2
channel ISDN <-> GSM Gateway - so I think I'm talking only to the main board
with this AT commands and not directly with one of the two TC35 modules.
The TC35i are no boxes - they are industrial style - no power or rs232 plug
only pcb with flat cable and antenna so I think its not possible to
disasamble the comsat device for only use one TC35i module :(
Regards Martin
-----Ursprόngliche Nachricht-----
Von: Alvaro Cornejo [mailto:cornejo.alv...@gmail.com]
Gesendet: Mittwoch, 06. Oktober 2010 23:45
An: Martin
Cc: users@kannel.org
Betreff: Re: Siemens TC35i built in coM.sat ISDN Plus 2
Martin
For the error you get with the modem use CMEE=1 or 2 to have the modem
display detailed error message.
About smsbox not showing/running: kannel is composed of 3 programs:
bearerbox, smsbox and wapbox. All 3 uses the same config file but need
to be run separately:
bearerbox path/kannel.conf [A must. must be the first to be executed]
smsbox. path/kannel.conf [http interface. needs bearerbox running]
wapbox path/kannel.conf [only needed for wap messaging. Needs bearerbox
running]
Check the manual for running options and details
Regards
Alvaro
|---------------------------------------------------------------------------
--------------------------------------|
Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Wed, Oct 6, 2010 at 3:48 PM, Martin <mazgac...@gmx.at> wrote:
Thanks you very much, Alvaro Cornejo, for the hint about the PIN which is
now disabled and I think I've configured nearly everything I need.
But if I understand kannel correct I should be able to connect to the
sendsms-port via browser (IE, FF, ...)
But the port won't be opened when I look with netstat on the kannel host I
only see
admin-port = 13000 and smsbox-port = 13011 tcp and 9200 and 9201 as udp
are
open
Logfile:
2010-10-06 22:17:39 [3242] [6] INFO: AT2[/dev/ttyS1]: opening device
2010-10-06 22:17:39 [3242] [6] DEBUG: AT2[/dev/ttyS1]: device opened
2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: device opened
2010-10-06 22:17:40 [3242] [6] INFO: AT2[/dev/ttyS1]: init device
2010-10-06 22:17:40 [3242] [6] INFO: AT2[/dev/ttyS1]: speed set to 19200
2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> ATZ^M
2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> AT^M
2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 22:17:40 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> AT&F^M
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> ATE0^M
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> AT\Q3^M
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CMGF=0^M
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CSMS=?^M
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: -->
AT+CNMI=1,2,0,1,1^M
2010-10-06 22:17:41 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 22:17:41 [3242] [6] INFO: AT2[/dev/ttyS1]: AT SMSC successfully
opened.
2010-10-06 22:17:51 [3242] [6] DEBUG: AT2[/dev/ttyS1]: <-- ERROR
2010-10-06 22:17:51 [3242] [6] ERROR: AT2[/dev/ttyS1]: Generic error:
ERROR
Kannel.conf
group = core
admin-port = 13000
admin-password = pwd
admin-deny-ip = ""
admin-allow-ip = "*.*.*.*"
smsbox-port = 13011
wdp-interface-name = "*"
log-file = "/var/log/kannel/bearerbox.log"
box-deny-ip = ""
box-allow-ip = "*.*.*.*"
group = smsc
smsc = at
modemtype = siemens-tc35
device = /dev/ttyS1
speed = 19200
group = smsbox
bearerbox-host = localhost
sendsms-port = 13013
sendsms-chars = "0123456789 "
access-log = "kannel.access"
log-file = "smsbox.log"
log-level = 0
group = sendsms-user
username = sms
password = pwd4sms
group = modems
id = siemens_tc35
name = "Siemens TC35"
detect-string = "coM"
init-string = "AT+CNMI=1,2,0,1,1"
speed = 19200
no-pin = true
enable-hwhs = "AT\\Q3"
need-sleep = true
regards
Martin
-----Ursprόngliche Nachricht-----
Von: Alvaro Cornejo [mailto:cornejo.alv...@gmail.com]
Gesendet: Mittwoch, 06. Oktober 2010 19:30
An: Martin
Cc: users@kannel.org
Betreff: Re: Siemens TC35i built in coM.sat ISDN Plus 2
By your logs, it seems kannel can communicate with one of your modems
directly.
Check userguide. There is a config parameter to disable the use of the
PIN.
As it seems you are connecting directly to one of the modems test to
set a the pin value in kannel config.
Hope helps
Regards
Alvaro
|---------------------------------------------------------------------------
--------------------------------------|
Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Wed, Oct 6, 2010 at 11:48 AM, Martin <mazgac...@gmx.at> wrote:
Hi!
Thank you for your help, I created the modems.conf and I setup the config
but it seems that the TC35 won't work because there is a manager for the
two
TC35i in the box and it handle the AT commands to the specified channel
so
I
think it's very hard for me to get the box running because my linux
skills
are medium but hardware skill especially for SMSC are nearly zero. With
minicom a can "talk" to the gateway but that doesn't help me.
If someone else have any idea which can help me please send it :)
Logfile:
2010-10-06 18:24:45 [5363] [6] INFO: AT2[/dev/ttyS1]: opening device
2010-10-06 18:24:45 [5363] [6] DEBUG: AT2[/dev/ttyS1]: device opened
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: device opened
2010-10-06 18:24:46 [5363] [6] INFO: AT2[/dev/ttyS1]: init device
2010-10-06 18:24:46 [5363] [6] INFO: AT2[/dev/ttyS1]: speed set to 19200
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> ATZ^M
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT^M
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT&F^M
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> ATE0^M
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT\Q3^M
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 18:24:46 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CPIN?^M
2010-10-06 18:24:47 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 18:24:56 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- ERROR
2010-10-06 18:24:56 [5363] [6] ERROR: AT2[/dev/ttyS1]: Generic error:
ERROR
2010-10-06 18:24:56 [5363] [6] DEBUG: AT2[/dev/ttyS1]: --> AT+CPIN?^M
2010-10-06 18:24:57 [5363] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 18:24:57 [5363] [6] ERROR: AT2[/dev/ttyS1]: Opening failed.
Terminating
2010-10-06 18:24:57 [5363] [6] INFO: AT2[/dev/ttyS1]: closing device
On this comsat device I don’t need a PIN because its already configured
so
the comsat device "manager" setup the two Siemens modems so I can talk to
them without any need of a PIN or something like that.
Regards Martin
-----Ursprόngliche Nachricht-----
Von: Alvaro Cornejo [mailto:cornejo.alv...@gmail.com]
Gesendet: Mittwoch, 06. Oktober 2010 18:14
An: Martin
Cc: users@kannel.org
Betreff: Re: Siemens TC35i built in coM.sat ISDN Plus 2
Search the lists for an available siemens modem definition. There is
also an example in the source code. You should add it to your kannel
config file.
Regarding the command from the manufacturer, Kannel does not support
it. It uses standard AT commands. You should check if your modem
supports it. if not you will have to develop your own driver.
Regards
Alvaro
|---------------------------------------------------------------------------
--------------------------------------|
Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Wed, Oct 6, 2010 at 10:59 AM, Martin <mazgac...@gmx.at> wrote:
Hi!
The main problem is that kannel or bearerbox is asking for the modem
definitions which I don’t have
Logfile bearerbox.log:
2010-10-06 17:42:07 [3517] [6] DEBUG: AT2[/dev/ttyS1]: device opened
2010-10-06 17:42:07 [3517] [6] INFO: AT2[/dev/ttyS1]: speed set to 19200
2010-10-06 17:42:07 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ^M
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> AT^M
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> AT&F^M
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ATE0^M
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: --> ATI^M
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- coM.s.a.t.
ISDN
Plus, Version 4.3.5
2010-10-06 17:42:09 [3517] [6] DEBUG: AT2[/dev/ttyS1]: <-- OK
2010-10-06 17:42:09 [3517] [6] PANIC: Where are the modem definitions
?!?!
2010-10-06 17:42:09 [3517] [6] PANIC:
/usr/sbin/bearerbox(gw_panic+0x101)
[0x80c60f1]
2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x8064ffb]
2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x806b3d5]
2010-10-06 17:42:09 [3517] [6] PANIC: /usr/sbin/bearerbox [0x80bd3b0]
kannel.conf:
group = smsc
smsc = at
modemtype = auto
device = /dev/ttyS1
speed = 19200
I know from the manufacture that I can send a sms via terminal with
at$smssend=<channel>,”<number>”,”<text>”<enter>
for example: at$smssend=1,”+43660303030”,”Hello here I am!”
regards
Martin
-----Ursprόngliche Nachricht-----
Von: Alvaro Cornejo [mailto:cornejo.alv...@gmail.com]
Gesendet: Mittwoch, 06. Oktober 2010 16:56
An: Martin
Cc: users@kannel.org
Betreff: Re: Siemens TC35i built in coM.sat ISDN Plus 2
Kannel uses "drivers" to talk to smsc's. The main drivers it has is
SMPP and AT commands. If your modem suports it you just need to
configure kannel with the specific driver for your equipment.
The TC35 is(was?) a serial modem. So you should be able to connect to
it with the AT driver. However I don't know how do you phisically
conect to the device. Kannel AT driver uses dev/ttyxxx for defining
the output physical port; therefore you need to verify that your OS
does map each modem to a dev/ttyxxx sp you can configure that device
in kannel.
Hope helps
Alvaro
|---------------------------------------------------------------------------
--------------------------------------|
Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Wed, Oct 6, 2010 at 6:04 AM, Martin <mazgac...@gmx.at> wrote:
Hello!
I΄ve a little problem to get kannel work on my debian.
I΄ve a coM.sat ISDN Plus 2 which have two TC35i built in, I only wanna
use
channel 1 with one sim card. I΄ve tested the comsat device with the
software
originally shipped with and especially sms works fine. So now I don’t
have
any idea how I can get it to work with kannel – maybe someone of you
can
help me!
German information about the comsat device can be found at
http://www.comsat.de/DE/GSM-Gateway/ISDN/ISDN-Plus-2-Kanal.htm
Regards Martin
