Ok thank you kindly, just how can I configure it to connect to other SMSC, I couldn't find it in the userguide, these are my smppbox configurations + SMSCs:
# opensmppbox.conf ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- group = core dlr-storage = mysql # this group defines your opensmppbox group = opensmppbox # our boxc type opensmppbox-id = smppbox1 # the port to listen on for smpp connections opensmppbox-port = 2346 # we connect to the following host as a box bearerbox-host = 127.0.0.1 bearerbox-port = 13002 log-level = 0 log-file = opensmppbox.log our-system-id = chim1 route-to-smsc = my-default-smsc # see sample smpplogins.txt smpp-logins = "smpplogins.txt" # If you set usesmppbox-id, you must set use-systemid-as-smsboxid, too # See documentation for details of this flag. use-smppboxid = yes use-systemid-as-smsboxid = yes box-dlr-storage = mysql # the following is just standard dlr configuration group = mysql-connection id = mydlr host = localhost username = root password = password database = kannel # you can increase this upon a higher load max-connections = 1 group = dlr-db id = mydlr table = smppbox_dlr field-smsc = smsc field-timestamp = ts field-destination = destination field-source = source field-service = service field-url = url field-mask = mask field-status = status field-boxc-id = boxcid # this field is needed when use-smppboxid flag is used #field-msg-id =id # Rules to route MOs. Routing is based either on smsc id, # shortcode or both. group = client-route client-id = myclient1 smsc-id = mysmsc1 group = client-route client-id = myclient2 smsc-id = mysmsc2 -------------------------------------------------------------------------------------------------------------------------------------------- SMSC im connected to: #operator 1 group = smsc smsc = smpp smsc-id = operator1_tx smsc-admin-id = operator1_tx allowed-smsc-id = operator1_tx interface-version = 34 host = IP1 smsc-username = user1***** smsc-password = password1***** system-type = smpp transceiver-mode = 0 system-id = operator1_tx log-file = "/var/log/kannel/operator1_tx.log" log-level = 3 group = smsc smsc = smpp smsc-id = operator1_rx smsc-admin-id = operator1_rx allowed-smsc-id = operator1_rx interface-version = 34 host = IP1 smsc-username = user1***** smsc-password = password1***** system-type = smpp receive-port = 1024 transceiver-mode = 0 system-id = operator1_rx log-file = "/var/log/kannel/operator1_rx.log" log-level = 3 #operator 2 group = smsc smsc = smpp smsc-id = operator2_tx smsc-admin-id = operator2_tx allowed-smsc-id = operator2_tx interface-version = 34 host = IP2 smsc-username = user2***** smsc-password = password2***** system-type = smpp transceiver-mode = 0 system-id = operator2_tx log-file = "/var/log/kannel/operator2_tx.log" log-level = 3 group = smsc smsc = smpp smsc-id = operator2_rx smsc-admin-id = operator2_rx allowed-smsc-id = operator2_rx interface-version = 34 host = IP2 smsc-username = user2***** smsc-password = password2***** system-type = smpp receive-port = 1025 transceiver-mode = 0 system-id = operator2_rx log-file = "/var/log/kannel/operator2_rx.log" log-level = 3 -------------------------------------------------------------------------------------------------------------------------------------------- Again, how can I configure smppbox to connect to each one of those(I know I need 2 smppboxes)? instead of bearerbox(which is connected to them now)? I think it's the smpplogins.txt is what I need to edit, just don't know how to configure it exactly? Thanks for everything. ________________________________ From: Rene Kluwen <rene.klu...@chimit.nl> To: 'Natalia Spoon' <natalia.sp...@yahoo.com>; "'users@kannel.org'" <us...@vm1.kannel.org> Sent: Tuesday, September 11, 2012 11:04 PM Subject: RE: help configuring smppbox addon At this moment, opensmppbox only connects to 1 smsc at the time. For multiple smsc’s you will need to start 2 opensmppbox instances. But no least cost or prefix or other routing is done. To get in touch with companies providing services for kannel, you can post in commerc...@kannel.org. == Rene From:users-boun...@vm1.kannel.org [mailto:users-boun...@vm1.kannel.org] On Behalf Of Natalia Spoon Sent: Tuesday, 11 September, 2012 14:45 To: users@kannel.org Subject: help configuring smppbox addon Dear Team, My company recently started using Kannel and We have it working fine, my question is regarding opensmppbx, It's connected to my bearerbox and working, but how can We configure it to connect to my operators' smsc? We can't find it in it's userguide, (please note We have 2 operators). Another question, how can I get in touch with companies providing services for kannel? ranges from mostly configuring + maintenance to sometimes backend server developments... Thank for your time.