Hi You need to add it on your smsc-at definition. You can set a separate log for each smsc.
group = smsc smsc = at smsc-id = modem1 log-level = 0 log-file = "/var/log/kannel/modem1.log" ... Regards Alvaro On 9/12/12, sudhakar_yg <sudhakar...@gmail.com> wrote: > > How do i set the log for modem? I tried adding log field in group modems > section, but kannel wouldn't start with it. > > > Alvaro Cornejo wrote: >> >> Just for sake of better troubleshoot add a separate logfile for the >> modem. This way it will be easyer to debug just modem. >> >> >> >> On 9/12/12, sudhakar_yg <sudhakar...@gmail.com> wrote: >>> >>> Also I have followed the "Modem initialization" section in the 1.4.3 UG >>> & >>> have done the permissions settings accordingly. >>> I have also tried run the kannel service as root user. But dont see any >>> changes in the behavior. >>> >>> >>> >>> >>> sudhakar_yg wrote: >>>> >>>> Thanks for reply Rene, >>>> I had read about the permission issue on /dev/ttyUSB0. I have given >>>> chmod >>>> 777 permission to /dev/ttyUSB0. >>>> I am able to access the modem over same port using minicom without any >>>> issues. >>>> If this permission is not proper, what else permissions i need to give? >>>> >>>> Cheers, >>>> Sudhakar >>>> >>>> >>>> >>>> Rene Kluwen wrote: >>>>> >>>>> Are you sure minicom responds when you enter /dev/ttyUSB0? >>>>> If yes, maybe it's a permission issue. >>>>> >>>>> -----Original Message----- >>>>> From: users-boun...@vm1.kannel.org >>>>> [mailto:users-boun...@vm1.kannel.org] >>>>> On >>>>> Behalf Of sudhakar_yg >>>>> Sent: Wednesday, 12 September, 2012 09:48 >>>>> To: us...@vm1.kannel.org >>>>> Subject: Kannel With SIM300 GSM Modem >>>>> >>>>> >>>>> Hi, >>>>> I am setting up the kannel over simcom GSM modem. Attached is my >>>>> configuration file. >>>>> http://old.nabble.com/file/p34422189/simcom.conf simcom.conf When I >>>>> try >>>>> to >>>>> bring up my bearerbox & monitor the SMPP log, Following are my SMPP & >>>>> Kannel >>>>> log, >>>>> ---------------------------------------------------------------------------- >>>>> ---------------------------------- >>>>> SMPP LOG >>>>> ---------------------------------------------------------------------------- >>>>> ---------------------------------- >>>>> 2012-09-12 01:05:16 [8841] [6] DEBUG: AT2[gsm]: detecting modem speed. >>>>> 2012-09-12 01:05:16 [8841] [6] INFO: AT2[gsm]: opening device >>>>> 2012-09-12 01:05:16 [8841] [6] DEBUG: AT2[gsm]: device opened. Telnet >>>>> mode = >>>>> 0 >>>>> 2012-09-12 01:05:17 [8841] [6] DEBUG: AT2[gsm]: device opened >>>>> 2012-09-12 01:05:17 [8841] [6] INFO: AT2[gsm]: speed set to 115200 >>>>> 2012-09-12 01:05:17 [8841] [6] DEBUG: AT2[gsm]: --> ^M >>>>> 2012-09-12 01:05:19 [8841] [6] DEBUG: AT2[gsm]: --> AT^M >>>>> 2012-09-12 01:05:25 [8841] [6] DEBUG: AT2[gsm]: --> AT^M >>>>> 2012-09-12 01:05:31 [8841] [6] DEBUG: AT2[gsm]: --> AT^M >>>>> >>>>> ---------------------------------------------------------------------------- >>>>> ----------------------------------- >>>>> Kannel Log >>>>> ---------------------------------------------------------------------------- >>>>> ---------------------------------- >>>>> sudhakar@5DMark-II:~/kannel/sbin$ bearerbox ../config/simcom.conf >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Debug_lvl = -1, log_file = >>>>> <none>, >>>>> log_lvl = 0 >>>>> 2012-09-12 12:55:42 [14593] [0] WARNING: DLR: using default 'internal' >>>>> for >>>>> storage type. >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: DLR using storage type: internal >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Kannel bearerbox version >>>>> `svn-r4910M'. >>>>> Build `Sep 6 2012 09:22:08', compiler `4.6.3'. >>>>> System Linux, release 3.2.0-29-generic-pae, version #46-Ubuntu SMP Fri >>>>> Jul >>>>> 27 17:25:43 UTC 2012, machine i686. >>>>> Hostname 5DMark-II, IP 127.0.1.1. >>>>> Libxml version 2.7.8. >>>>> Compiled with MySQL 5.5.24, using MySQL 5.5.24. >>>>> Using native malloc. >>>>> >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Added logfile >>>>> `/home/sudhakar/kannel/logs/kannel.log' with level `0'. >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Started access logfile >>>>> `/home/sudhakar/kannel/logs/access.log'. >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: SSL not supported, no SSL >>>>> initialization done. >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: HTTP: Opening server at port >>>>> 13000. >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 1 >>>>> (gwlib/fdset.c:poller) >>>>> 2012-09-12 12:55:42 [14593] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) >>>>> maps >>>>> to pid 14593. >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 2 >>>>> (gwlib/http.c:server_thread) >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 3 >>>>> (gw/bb_http.c:httpadmin_run) >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: starting smsbox connection >>>>> module >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: BOXC: 'smsbox-max-pending' not >>>>> set, >>>>> using default (100). >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Adding smsbox routing to id >>>>> <smsbox> >>>>> for smsc id <gsm> >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 4 >>>>> (gw/bb_boxc.c:sms_to_smsboxes) >>>>> 2012-09-12 12:55:42 [14593] [4] DEBUG: Thread 4 >>>>> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 14593. >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 5 >>>>> (gw/bb_boxc.c:smsboxc_run) >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Set SMS resend frequency to 60 >>>>> seconds. >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: SMS resend retry set to >>>>> unlimited. >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: MO concatenated message >>>>> handling >>>>> enabled >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: DLR rerouting for smsc id <gsm> >>>>> disabled. >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Added logfile >>>>> `/home/sudhakar/kannel/logs/smpp.log' with level `0'. >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: AT2[gsm]: configuration doesn't >>>>> show >>>>> modemtype. will autodetect >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 6 >>>>> (gw/smsc/smsc_at.c:at2_device_thread) >>>>> 2012-09-12 12:55:42 [14593] [6] DEBUG: Thread 6 >>>>> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 14593. >>>>> 2012-09-12 12:55:42 [14593] [6] INFO: Logging thread `6' to logfile >>>>> `/home/sudhakar/kannel/logs/smpp.log' with level `0'. >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 7 >>>>> (gw/bb_smscconn.c:sms_router) >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: >>>>> ---------------------------------------- >>>>> 2012-09-12 12:55:42 [14593] [5] DEBUG: Thread 5 >>>>> (gw/bb_boxc.c:smsboxc_run) >>>>> maps to pid 14593. >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Kannel bearerbox II version >>>>> svn-r4910M >>>>> starting >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Loading store file >>>>> `/home/sudhakar/kannel/logs/kannel.store' >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Store-file size 0, starting to >>>>> unpack >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: Retrieved 0 messages, >>>>> non-acknowledged >>>>> messages: 0 >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: Started thread 8 >>>>> (gw/bb_store_file.c:store_dumper) >>>>> 2012-09-12 12:55:42 [14593] [8] DEBUG: Thread 8 >>>>> (gw/bb_store_file.c:store_dumper) maps to pid 14593. >>>>> 2012-09-12 12:55:42 [14593] [7] DEBUG: Thread 7 >>>>> (gw/bb_smscconn.c:sms_router) maps to pid 14593. >>>>> 2012-09-12 12:55:42 [14593] [0] INFO: MAIN: Start-up done, entering >>>>> mainloop >>>>> 2012-09-12 12:55:42 [14593] [0] DEBUG: AT2[gsm]: start called >>>>> 2012-09-12 12:55:42 [14593] [8] DEBUG: Dumping 0 messages to store >>>>> 2012-09-12 12:55:42 [14593] [3] DEBUG: Thread 3 >>>>> (gw/bb_http.c:httpadmin_run) >>>>> maps to pid 14593. >>>>> 2012-09-12 12:55:42 [14593] [2] DEBUG: Thread 2 >>>>> (gwlib/http.c:server_thread) >>>>> maps to pid 14593. >>>>> 2012-09-12 12:55:42 [14593] [2] DEBUG: HTTP: Including port 13000, fd >>>>> 11 >>>>> for >>>>> polling in server thread >>>>> >>>>> ---------------------------------------------------------------------------- >>>>> ----------------------------------- >>>>> >>>>> After this kannel doesn't proceed further from there & I don't see the >>>>> SMSC >>>>> connectivity happening. >>>>> I have used minicom & derived on the appropriate AT commands for init >>>>> strings. Did a lot of googling & did not find solution for my problem. >>>>> Please suggest a solution & let me know where am I going wrong with my >>>>> setup. >>>>> >>>>> Thanks in advance, >>>>> Sudhakar >>>>> >>>>> >>>>> >>>>> -- >>>>> View this message in context: >>>>> http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34422189.html >>>>> Sent from the Kannel - User mailing list archive at Nabble.com. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> -- >>> View this message in context: >>> http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34423838.html >>> Sent from the Kannel - User mailing list archive at Nabble.com. >>> >>> >>> >> >> >> -- >> |-----------------------------------------------------------------------------------------------------------------| >> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier >> celular y Nextel >> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via >> SMS y GPRS online >> Visitenos en www.perusms.NET www.smsglobal.com.mx y >> www.pravcom.com >> >> >> > > -- > View this message in context: > http://old.nabble.com/Kannel-With-SIM300-GSM-Modem-tp34422189p34424704.html > Sent from the Kannel - User mailing list archive at Nabble.com. > > > -- |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com
