Thank you. Let me test it and revert back if needed.
Thank again. ------ loyc Cossou On 12 August 2014 01:51, Willy Mularto <sangpr...@gmail.com> wrote: > group = smsc > smsc = smpp > smsc-id = NTSC_Demo_1 > allowed-smsc-id = "NTSC_Demo_1" > host = smpp.ntsc.co > port = 1234 > receive-port = 1234 > smsc-username = xxxx > smsc-password = xxxx > system-type = VMA > address-range = " " > source-addr-ton = 0 > source-addr-npi = 0 > dest-addr-ton = 0 > dest-addr-npi = 0 > msg-id-type = 0x00 > transceiver-mode = true > source-addr-autodetect = no > > group = smsc > smsc = smpp > smsc-id = "NTSC_Demo_2" > allowed-smsc-id = "NTSC_Demo_2" > host = smpp.ntsc.co > port = 4321 > receive-port = 4321 > smsc-username = xxxx > smsc-password = xxxx > system-type = VMA > address-range = " " > source-addr-ton = 0 > source-addr-npi = 0 > dest-addr-ton = 0 > dest-addr-npi = 0 > msg-id-type = 0x00 > transceiver-mode = true > source-addr-autodetect = no > > group = smsc > smsc = smpp > smsc-id = "NTSC_Demo_3" > allowed-smsc-id = "NTSC_Demo_3" > host = smpp.ntsc.co > port = 1423 > receive-port = 1423 > smsc-username = xxxx > smsc-password = xxxx > system-type = VMA > address-range = " " > source-addr-ton = 0 > source-addr-npi = 0 > dest-addr-ton = 0 > dest-addr-npi = 0 > msg-id-type = 0x00 > transceiver-mode = true > source-addr-autodetect = no > > group = smsbox-route > smsbox-id = mysmsc > smsc-id = "NTSC_Demo_1;NTSC_Demo_2;NTSC_Demo_3” > > > I suggest you not to use space on smsc-id name. > > > Willy Mularto > SMS Gateway, Content Provider, Mobile Solution Specialist > M: +62811923464, +62818923464 > PIN BBM: 74924429 > > > > On Aug 12, 2014, at 7:43 AM, Loyc Cossou <loycos...@gmail.com> wrote: > > Ok... > > Can you please copy me one sample? Or please alter this (my existing conf): > > *group = smsc* > *smsc = smpp* > *smsc-id = NTSC Demo* > *#interface-version = 34* > * host = smpp.ntsc.co <http://smpp.ntsc.co/>* > *port = 8888* > *receive-port = 8888* > *smsc-username = xxxx* > *smsc-password = xxxx* > *system-type = VMA* > *address-range = " "* > *source-addr-ton = 0* > *source-addr-npi = 0* > *dest-addr-ton = 0* > *dest-addr-npi = 0* > *msg-id-type = 0x00* > * transceiver-mode = true* > *source-addr-autodetect = no* > > > What would it become? > > Many many thanks Willy. > > > ------ > loyc Cossou > > > On 12 August 2014 00:59, Willy Mularto <sangpr...@gmail.com> wrote: > >> Copy the existing smsc configuration and define unique smsc-id for each, >> also setup allowed-smsc-id and last one smsbox routing. >> On 12 Aug 2014 06:20, "Loyc Cossou" <loycos...@gmail.com> wrote: >> >>> Hello to everyone, >>> >>> I have my kannel gateway configured to work with a SMSC over SMPP and >>> it's works fine and am happy with it. >>> Now I need to connect a second SMSC from SMPP again but from another >>> Operator so bot of them will be connected to the gateway so when I receive >>> a SMS from Operator A, I can reply via operator A etc. Am I supposed a do a >>> particular setting or just add a second SMS Group? >>> >>> I know this is already fixed somewhere on the internet but can't find my >>> way to that the solution, so please, help me. >>> >>> Cheers. >>> >>> ------ >>> loyc Cossou >>> >> > >
