you’re welcome. make sure you always state which smsc_id you want to use on each MT
Willy Mularto SMS Gateway, Content Provider, Mobile Solution Specialist M: +62811923464, +62818923464 PIN BBM: 74924429 On Aug 12, 2014, at 7:55 AM, Loyc Cossou <loycos...@gmail.com> wrote: > Thank you. > > Let me test it and revert back if needed. > > Thank again. > > > > ------ > loyc Cossou > > > On 12 August 2014 01:51, Willy Mularto <sangpr...@gmail.com> wrote: > group = smsc > smsc = smpp > smsc-id = NTSC_Demo_1 > allowed-smsc-id = "NTSC_Demo_1" > host = smpp.ntsc.co > port = 1234 > receive-port = 1234 > smsc-username = xxxx > smsc-password = xxxx > system-type = VMA > address-range = " " > source-addr-ton = 0 > source-addr-npi = 0 > dest-addr-ton = 0 > dest-addr-npi = 0 > msg-id-type = 0x00 > transceiver-mode = true > source-addr-autodetect = no > > group = smsc > smsc = smpp > smsc-id = "NTSC_Demo_2" > allowed-smsc-id = "NTSC_Demo_2" > host = smpp.ntsc.co > port = 4321 > receive-port = 4321 > smsc-username = xxxx > smsc-password = xxxx > system-type = VMA > address-range = " " > source-addr-ton = 0 > source-addr-npi = 0 > dest-addr-ton = 0 > dest-addr-npi = 0 > msg-id-type = 0x00 > transceiver-mode = true > source-addr-autodetect = no > > group = smsc > smsc = smpp > smsc-id = "NTSC_Demo_3" > allowed-smsc-id = "NTSC_Demo_3" > host = smpp.ntsc.co > port = 1423 > receive-port = 1423 > smsc-username = xxxx > smsc-password = xxxx > system-type = VMA > address-range = " " > source-addr-ton = 0 > source-addr-npi = 0 > dest-addr-ton = 0 > dest-addr-npi = 0 > msg-id-type = 0x00 > transceiver-mode = true > source-addr-autodetect = no > > group = smsbox-route > smsbox-id = mysmsc > smsc-id = "NTSC_Demo_1;NTSC_Demo_2;NTSC_Demo_3” > > > I suggest you not to use space on smsc-id name. > > > Willy Mularto > SMS Gateway, Content Provider, Mobile Solution Specialist > M: +62811923464, +62818923464 > PIN BBM: 74924429 > > > > On Aug 12, 2014, at 7:43 AM, Loyc Cossou <loycos...@gmail.com> wrote: > >> Ok... >> >> Can you please copy me one sample? Or please alter this (my existing conf): >> >> group = smsc >> smsc = smpp >> smsc-id = NTSC Demo >> #interface-version = 34 >> host = smpp.ntsc.co >> port = 8888 >> receive-port = 8888 >> smsc-username = xxxx >> smsc-password = xxxx >> system-type = VMA >> address-range = " " >> source-addr-ton = 0 >> source-addr-npi = 0 >> dest-addr-ton = 0 >> dest-addr-npi = 0 >> msg-id-type = 0x00 >> transceiver-mode = true >> source-addr-autodetect = no >> >> What would it become? >> >> Many many thanks Willy. >> >> >> >> ------ >> loyc Cossou >> >> >> On 12 August 2014 00:59, Willy Mularto <sangpr...@gmail.com> wrote: >> Copy the existing smsc configuration and define unique smsc-id for each, >> also setup allowed-smsc-id and last one smsbox routing. >> >> On 12 Aug 2014 06:20, "Loyc Cossou" <loycos...@gmail.com> wrote: >> Hello to everyone, >> >> I have my kannel gateway configured to work with a SMSC over SMPP and it's >> works fine and am happy with it. >> Now I need to connect a second SMSC from SMPP again but from another >> Operator so bot of them will be connected to the gateway so when I receive >> a SMS from Operator A, I can reply via operator A etc. Am I supposed a do a >> particular setting or just add a second SMS Group? >> >> I know this is already fixed somewhere on the internet but can't find my way >> to that the solution, so please, help me. >> >> Cheers. >> >> ------ >> loyc Cossou >> >> >> > >