Hi
Don't know the solution but here are a couple of workarounds:
If you don't use it that dongle for sms messaging, don't include it in
kannel config.
Else you can remove CPIN command in your kannel config for that dongle.
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
Visitenos en www.perusms.com
On Mon, Jun 13, 2016 at 7:59 PM, Paul Isidore <paul_isid...@hotmail.com>
wrote:
> Hello,
>
>
> I'm newbie and i try to make a SMSC center woth Kannel and one of two
> Huawei dongle Modem (EC167 and EC156)
>
> After doing kannel configuration and run :
>
> sudo bearerbox -v 0 /etc/kannel/kannel.conf
>
>
> i got error SIM CARD not inserted.
>
>
> There is no need to use a SIM card with the USB dongle because i used it
> to connect to internet but i put one in it and the same error is still
> coming.
>
>
> this is the log file, please help me :
>
>
> 2016-06-14 00:50:05 [8472] [6] INFO: AT2[huawei]: Logging in
> 2016-06-14 00:50:05 [8472] [6] INFO: AT2[huawei]: init device
> 2016-06-14 00:50:05 [8472] [6] INFO: AT2[huawei]: speed set to 9600
> 2016-06-14 00:50:05 [8472] [6] DEBUG: AT2[huawei]: --> ATZ^M
> 2016-06-14 00:50:05 [8472] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 00:50:05 [8472] [6] DEBUG: AT2[huawei]: --> AT^M
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- AT
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> AT&F^M
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- AT&F
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> ATE0^M
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- ATE0
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> AT+IFC=2,2^M
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> AT+CPIN?^M
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- +CME ERROR:SIM not
> inserted
> 2016-06-14 00:50:06 [8472] [6] ERROR: AT2[huawei]: Generic error: +CME
> ERROR:SIM not inserted
> 2016-06-14 00:50:06 [8472] [6] ERROR: AT2[huawei]: Initialization of
> device failed.
> 2016-06-14 00:50:06 [8472] [6] INFO: AT2[huawei]: Closing device
> 2016-06-14 00:50:06 [8472] [6] INFO: AT2[huawei]: Closing device
>
>
>
