Hi
The message is clear. You modem does not support the AT+CSCA command.
Remove it from config.
In most cases, smsc center is configured automatically by the operator
through the sim card and sim initialization. Therefore you shouldn't need
to configure it.
Regards,
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
Visitenos en www.perusms.com
On Tue, Jun 14, 2016 at 6:26 PM, Paul Isidore <paul_isid...@hotmail.com>
wrote:
> Hi,
>
> Indeed, I take the CPIN command config modem and this time I get a new
> error message about attaching the smsc center number, i also try the
> no-smsc to circumvent this but still get this new error message. (While
> both modem sends and receive sms on Windows 8.1).
>
>
> Best regards,
>
>
> Here is a copy of the log file:
>
> 2016-06-14 22:55:07 [1760] [7] DEBUG: Thread 7
> (gw/bb_smscconn.c:sms_router) maps to pid 1760.
> 2016-06-14 22:55:07 [1760] [6] INFO: AT2[huawei]: trying to use speed
> <9600> from modem definition
> 2016-06-14 22:55:07 [1760] [6] INFO: AT2[huawei]: opening device
> 2016-06-14 22:55:07 [1760] [0] INFO: Loading store file
> `/var/log/kannel/kannel.store'
> 2016-06-14 22:55:07 [1760] [0] INFO: Store-file size 0, starting to unpack
> 2016-06-14 22:55:07 [1760] [0] INFO: Retrieved 0 messages,
> non-acknowledged messages: 0
> 2016-06-14 22:55:07 [1760] [6] DEBUG: AT2[huawei]: device opened. Telnet
> mode = 0
> 2016-06-14 22:55:07 [1760] [0] DEBUG: Started thread 8
> (gw/bb_store_file.c:store_dumper)
> 2016-06-14 22:55:07 [1760] [0] INFO: MAIN: Start-up done, entering mainloop
> 2016-06-14 22:55:07 [1760] [0] DEBUG: AT2[huawei]: start called
> 2016-06-14 22:55:07 [1760] [8] DEBUG: Thread 8
> (gw/bb_store_file.c:store_dumper) maps to pid 1760.
> 2016-06-14 22:55:07 [1760] [8] DEBUG: Dumping 0 messages to store
> 2016-06-14 22:55:08 [1760] [6] DEBUG: AT2[huawei]: device opened
> 2016-06-14 22:55:08 [1760] [6] INFO: AT2[huawei]: speed set to 9600
> 2016-06-14 22:55:08 [1760] [6] DEBUG: AT2[huawei]: --> ^M
> 2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: --> AT^M
> 2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: <-- AT
> 2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:10 [1760] [6] INFO: AT2[huawei]: Closing device
> 2016-06-14 22:55:10 [1760] [6] INFO: AT2[huawei]: speed is 9600
> 2016-06-14 22:55:10 [1760] [6] INFO: AT2[huawei]: opening device
> 2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: device opened. Telnet
> mode = 0
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: device opened
> 2016-06-14 22:55:11 [1760] [6] INFO: AT2[huawei]: Logging in
> 2016-06-14 22:55:11 [1760] [6] INFO: AT2[huawei]: init device
> 2016-06-14 22:55:11 [1760] [6] INFO: AT2[huawei]: speed set to 9600
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: --> ATZ^M
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- ATZ
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: --> AT^M
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- AT
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: --> AT&F^M
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- AT&F
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: --> ATE0^M
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- ATE0
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: --> AT+IFC=2,2^M
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: -->
> AT+CSCA="+XXXXXXXXXX"^M
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- COMMAND NOT SUPPORT
> 2016-06-14 22:55:14 [1760] [0] WARNING: Killing signal or HTTP admin
> command received, shutting down...
> 2016-06-14 22:55:14 [1760] [0] DEBUG: Shutting down Kannel...
> 2016-06-14 22:55:14 [1760] [0] DEBUG: shutting down smsc
> 2016-06-14 22:55:14 [1760] [0] DEBUG: AT2[huawei]: Shutting down SMSCConn,
> slow
> 2016-06-14 22:55:14 [1760] [0] DEBUG: shutting down udp
> 2016-06-14 22:55:16 [1760] [6] ERROR: AT2[huawei]: Initialization of
> device failed.
> 2016-06-14 22:55:16 [1760] [6] INFO: AT2[huawei]: Closing device
> 2016-06-14 22:55:16 [1760] [6] INFO: AT2[huawei]: Closing device
> 2016-06-14 22:55:16 [1760] [7] DEBUG: Thread 7
> (gw/bb_smscconn.c:sms_router) terminates.
> 2016-06-14 22:55:16 [1760] [4] DEBUG: Thread 4
> (gw/bb_boxc.c:sms_to_smsboxes) terminates.
> 2016-06-14 22:55:16 [1760] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run)
> terminates.
>
>
> ------------------------------
> *De :* Alvaro Cornejo <cornejo.alv...@gmail.com>
> *Envoyé :* mardi 14 juin 2016 19:29
> *À :* Paul Isidore
> *Cc :* users@kannel.org
> *Objet :* Re: Kannel and Huawei EC167 and EC156 failed to reponse to
> AT+CPIN=? command
>
> Hi
>
> Don't know the solution but here are a couple of workarounds:
>
> If you don't use it that dongle for sms messaging, don't include it in
> kannel config.
>
> Else you can remove CPIN command in your kannel config for that dongle.
>
> Regards
>
> Alvaro
>
>
> |-----------------------------------------------------------------------------------------------------------------|
> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
> celular y Nextel
> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
> y GPRS online
> Visitenos en www.perusms.com
>
> On Mon, Jun 13, 2016 at 7:59 PM, Paul Isidore <paul_isid...@hotmail.com>
> wrote:
>
>> Hello,
>>
>>
>> I'm newbie and i try to make a SMSC center woth Kannel and one of two
>> Huawei dongle Modem (EC167 and EC156)
>>
>> After doing kannel configuration and run :
>>
>> sudo bearerbox -v 0 /etc/kannel/kannel.conf
>>
>>
>> i got error SIM CARD not inserted.
>>
>>
>> There is no need to use a SIM card with the USB dongle because i used it
>> to connect to internet but i put one in it and the same error is still
>> coming.
>>
>>
>> this is the log file, please help me :
>>
>>
>> 2016-06-14 00:50:05 [8472] [6] INFO: AT2[huawei]: Logging in
>> 2016-06-14 00:50:05 [8472] [6] INFO: AT2[huawei]: init device
>> 2016-06-14 00:50:05 [8472] [6] INFO: AT2[huawei]: speed set to 9600
>> 2016-06-14 00:50:05 [8472] [6] DEBUG: AT2[huawei]: --> ATZ^M
>> 2016-06-14 00:50:05 [8472] [6] DEBUG: AT2[huawei]: <-- OK
>> 2016-06-14 00:50:05 [8472] [6] DEBUG: AT2[huawei]: --> AT^M
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- AT
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> AT&F^M
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- AT&F
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> ATE0^M
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- ATE0
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> AT+IFC=2,2^M
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> AT+CPIN?^M
>> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- +CME ERROR:SIM not
>> inserted
>> 2016-06-14 00:50:06 [8472] [6] ERROR: AT2[huawei]: Generic error: +CME
>> ERROR:SIM not inserted
>> 2016-06-14 00:50:06 [8472] [6] ERROR: AT2[huawei]: Initialization of
>> device failed.
>> 2016-06-14 00:50:06 [8472] [6] INFO: AT2[huawei]: Closing device
>> 2016-06-14 00:50:06 [8472] [6] INFO: AT2[huawei]: Closing device
>>
>>
>>
>
> ------------------------------
>
> *Paul Isidore A. NIAMIE*
>
> *?? ???????????? Directeur G??n??ral??????????*
>
> *Micro Computer Programme????????*
>
>
> *Bur: 00 221 33 864 42 54 *
>
> *Cell: 00 221 77 561 88 16 *
>
> ??
>
