On Sep 3, 2014, at 12:57 PM, Albert López <[email protected]> wrote:
> Hi Renne,
>
> The RTR boxes are learned through the Map Server using control messages. As
> far as I know, not all the Map Servers in Beta Network has support of Nat
> Traversal. You should ask in unicast lo Lori (in CC) to provide you with an
> EID allocated in one of these Map Servers.
Rene’s EID is allocated on the European infrastructure which has four
Map-Servers. Two of the four Map-Servers support NAT-T. They are:
intouch-ams-mr-ms-1.rloc.lisp4.net (217.8.98.42) and
intouch-ams-mr-ms-2.rloc.lisp4.net (217.8.98.46). They can also be used over
IPv6 RLOCs, by substituting lisp4 with lisp6 in the hostname.
HTH,
-Lori
>
> Regards
>
> Albert
>
> On 03/09/14 11:42, Rene Bartsch wrote:
>> Am 2014-09-03 10:26, schrieb Albert López:
>>> Hi Renne
>>>
>>> On 03/09/14 10:01, Rene Bartsch wrote:
>>>> It's a Google Nexus4 with Android 4.4.4.
>> Hi Albert,
>>
>> LISPmob connects with the Map-Servers, -Resolvers and PxTR (193.162.145.46).
>> As I cannot connect to websites I assume 193.162.145.46 does not support
>> NAT-T/RTR. According to the Log the EID is not found if I enable NAT in
>> LISPmob (DEBUG-3: lookup_map_cache_exact_node: The entry 153.16.xxx.xxx/32
>> is not found in the map cache).
>>
>> Do you know a RTR-capable PxTR I can use with the CISCO EIDs?
>>
>> Regards,
>>
>> Renne
>>
>>
>>>>
>>>> Do I have to select a RLOC interface? If yes, which one?
>>> Yes, this is the reason you have a configuration error. The usual
>>> interfaces names are wlan0 for wifi and rmnet0 for 3g. You could check
>>> the interfaces to be used if you do and ip address. The interfaces to
>>> be used will have an address assigned (if the interface is up in that
>>> moment).
>>>
>>> We will try to provide a more clear error message for a next release.
>>>>
>>>> Where do I find the configuration/log file? Although I have selected 3 as
>>>> Log-Level the GUI shows no log entries ("Refresh" doesn't help).
>>> The configuration and log files are stored in sdcard. It is normal
>>> that you don't have logs at this point as logs are from the lispmob
>>> deamon (the same that appear in a Linux box) and it has not yet
>>> started.
>>>
>>> Regards
>>>
>>> Albert
>>>>
>>>> Thanks,
>>>>
>>>> Renne
>>>>
>>>>
>>>> Am 2014-09-03 09:43, schrieb Albert López:
>>>>> Hi Renne,
>>>>>
>>>>> The VPN-API bug introduced in android 4.4.0 has been fixed in android
>>>>> 4.4.4.
>>>>> Regarding the error of the EID, the non Root version of LISPmob only
>>>>> supports one EID and this one should be only the IP address without
>>>>> the mask. If you still have the problem, could you provide me with the
>>>>> Android version, configuration file and log file?
>>>>>
>>>>> Thanks
>>>>>
>>>>> Albert
>>>>>
>>>>> On 03/09/14 09:18, Rene Bartsch wrote:
>>>>>> Hi,
>>>>>>
>>>>>> on Android 4.4 I always get the error message "Wrong configuration" when
>>>>>> starting the VPN and the EID is gone in the GUI.
>>>>>>
>>>>>> Are there any news from Google about the VPN-API bug?
>>>>>>
>>>>>> Thanx for any hint,
>>>>>>
>>>>>> Renne
>>>>
>>
>
>
> -
>
