Hi Albert,
I configured my testbed as advised. I can see ping packets from the MN getting
to the CN but once the reply gets to the PxTR, it doesn't get forwarded to the
MN. I have a feeling that the problem is from the PxTR configuration.
Regards, Musab Isah
Research Student,School of Computing and Communications,D29, InfoLab21Lancaster
University
On Friday, December 5, 2014 11:36 AM, MUSAB MUHAMMAD <[email protected]>
wrote:
Hi Albert,
I am a bit confused here. When you say "xTR:
- Set IP of PiTR and PeTR
" Do you meant that I should have both the lispmob-pxtr and
lispmob-experimental packages compiled on the pxtr node? Because, on the
lispmob-pxtr package there is no option to set it as xTR, that option only
exists on lispmob-experimental.
Secondly, your point:"PxTR
- Set "pxtr-mode = on"
- The database-mapping structure of the configuration file is reused to
indicate the prefixes that will be lisp encapsulated by the PiTR
" If I put the EID prefix of the mobile node here, is it okay to comment out
the remaining parameters, such as interface, priority_v4 etc or I have to
provide an interface (now which interface?)?
And lastly, the MS and PxTR are hosted on different nodes, is the configuration
of my MS correctly done?
Thank you.
Musab Isah
Research Student,School of Computing and Communications,D29, InfoLab21Lancaster
University
On Friday, December 5, 2014 9:32 AM, Albert <[email protected]> wrote:
Hi Musab
To configure the PxTR you should use the following instructions:
xTR:
- Set IP of PiTR and PeTR
PxTR
- Set "pxtr-mode = on"
- The database-mapping structure of the configuration file is reused to
indicate the prefixes that will be lisp encapsulated by the PiTR
You also have to configure the routing of your testbed in order that packets
whose destinations are EIDs are sent to the PiTR. Let me know if this solve
your problem
Regards
Albert
El 04/12/14 a les 23:03, MUSAB MUHAMMAD ha escrit:
Hi Albert,
I have configured lisp MN, MS and PxTR. The communication between the MN and
the MS seems to be working well as I can see the 'map register' and 'map
notify' messages being sent and received. But once I attempt to ping a
correspondent node, I get no response from the PxTR. I have provided my
configurations for all the 3 nodes and the logs below. Can you please follow
the links to see if you can determine what the problem is?
lisp mn log: http://pastebin.com/sw9aNWhv lisp mn conf:
http://pastebin.com/q1rLXSdr map server log: http://pastebin.com/c802XX5S map
server conf: http://pastebin.com/b17mUC2u
pxtr log: http://pastebin.com/NzuqfWx7
pxtr conf: http://pastebin.com/5A19tCFE
Thank you very much.
Musab Isah
Research Student, School of Computing and Communications, D29, InfoLab21
Lancaster University
On Wednesday, December 3, 2014 12:20 PM, Albert <[email protected]>
wrote:
Hi Musab,
Just one clarification. When LISPmob works as a MS/MR, the MR will only reply
to the mappings configured in the MS. It doesn't interact with ddt nodes.
Best regards
Albert
El 03/12/14 a les 12:15, Alberto Rodriguez-Natal ha escrit:
Hi Musab,
Sure it is! You can checkout the branch 'experimental' [1] which includes
support for MS/MR. Make sure to enable Map Server operation in lispd.conf and
to fill out all the required parameters there. Likewise the 'pxtr' branch,
experimental is not released yet and may contain bugs.
Best,
Alberto
[1] https://github.com/LISPmob/lispmob/tree/experimental
On Tue, Dec 2, 2014 at 1:47 PM, MUSAB MUHAMMAD <[email protected]> wrote:
Hi Alberto,
Thanks for your reply. Is it also possible to setup a map-server locally? I
want to have a full lisp mobile node network in the lab please.
Thank you. Musab Isah
Research Student, School of Computing and Communications, D29, InfoLab21
Lancaster University
On Monday, December 1, 2014 11:13 AM, Alberto Rodriguez-Natal
<[email protected]> wrote:
Hi Musab,
In order to use LISPmob as a PxTR you should checkout the branch 'pxtr' [1]
and follow lispd.conf.example instructions to configure it. Note well that
PxTR code has not been officially released and has gone thought little
testing. We offer it as a best effort, but we can provide little support. The
PxTR feature will be eventually merged into the upcoming 5.0 release.
Best,
Alberto
[1] https://github.com/LISPmob/lispmob/tree/pxtr
On Sat, Nov 29, 2014 at 12:06 PM, MUSAB MUHAMMAD <[email protected]> wrote:
Hi,
I recently learned that I can set up a PxTR in the lab with the new
lispmob-experimental (potentially lispmob 0.5.0). I have downloaded the
package but can't set up the tunnel router and other relevant components as
there is no documentation yet. Can someone please guide me towards setting up
LISP locally in the lab?
Thank you,
Musab Isah
Research Student, School of Computing and Communications, D29, InfoLab21
Lancaster University
