I'm currently setting up a UK-5RH Pro Max which is able to monitor around 6 
frequency bands as well as having the FM Radio function available on many 
UV-5Rs.  

I've been trying to set-up a number of additional FM radio frequencies in the 
range of 88.8 MHz to 107.5 MHz for stations in and around London here in the 
UK.  These frequencies can for the most part be found on the FM radio function, 
but they can't be named with the built in FM radio scanner - so was seeking to 
create these as a set of defined channels in my configuration file.

I have created these as a CSV and have loaded them into Chirp as a CSV import.  
However I don't seem to be able to insert them into the configuration file for 
the handset.  Unfortunately, I receive the message "Some memories are 
incompatible with this radio" and specific errors such as "Frequency 96.400000 
is out of supported range" for all 60 that I'm trying to insert.  

I have added other frequencies from 108 MHz onwards and there are absolutely no 
problems with these - so am sure that the method I'm using to add these is 
correct.  It seems to just be the question around adding any frequencies below 
108 MHz and the Chirp configuration and/or the Radio not accepting them.

I've checked the radio and I can scan all of the ranges outlined below, so the 
radio is capable of receiving on those ranges:
- 65-108 MHz                    FM              RX
- 108-136 MHz           AM              RX              AM Air Receiving Only
- 136-174 MHz           FM              TX/RX
- 220-260 MHz           FM              TX/RX
- 350-390 MHz           FM              RX              
- 400-480 MHz           FM              TX/RX
- 480-520 MHz           FM              RX              

I have used both the Baofeng UV-5RH and Baofeng 5RM but neither of these allow 
these frequencies to be added to the listing.  I was keen to have FM radio 
channels with names and direct selection via the channel selection capability, 
but it seem that this isn't possible.  It means that I'd need to scan anywhere 
where I am and hope to guess what the radio station is.

Would anyone know why the software (or Radio/Profile) isn't allowing me to add 
these frequencies?
_______________________________________________
Users mailing list
[email protected]
https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email 
[email protected]
List archives: 
https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/

Reply via email to