You should open a ticket. Then attach a CHIRP Radio Images (*.img) file from the radio programmed using CHIRP that doesn’t work. Then attach an “image” from the radio programmed with the factory software that works with all radios.
Jim KC9HI On Wed, Aug 6, 2025 at 11:57 PM J. David Aten via Users < [email protected]> wrote: > I used CHIRP with my two BTECH B-1 FRS rados, to put in tones for four > channels, so that I could use it with the radios at the museum that I > volunteer at. All of the radios are Baofeng, and, all have been > programmed with CHIRP. but, none of the tones that I used for my two FRS > radios would work with those on the other radio. my two worked fine, > between themselves. both on those that have a tone, and those that don't. > and, these two radio will be heard on other radios, that don't use a tone. > After several emails to BTECH. I used thiersoftware, to put the tones onto > the four channels that I needed them on, and, now my FRS radios will > work with all of he other radios I have tried them with. So, there must be > something wrong with the tones that CHIRP uses for these FRS radios. Since > there is no real debug file, I don't tink, I didn't submit this that way. > thank for any ideas. David > _______________________________________________ > Users mailing list > [email protected] > https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com > To unsubscribe, send an email to [email protected] > To report this email as off-topic, please email > [email protected] > List archives: > https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/ > _______________________________________________ Users mailing list [email protected] https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] List archives: https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
