Is this a known problem other people have had, too? Or am I the lucky guy who found it first? Seems like this sort of thing happens to me far too often compared to people I know.
No idea of a workaround? — Sent from my Ipad > On Oct 23, 2025, at 07:34, Jim Unroe via Users <[email protected]> > wrote: > > >> >> WORK MODE SETTINGS... >> MR A Channel... I set it to "1", but it stays at "127" after I upload to >> radio. Interestingly enough, when I turn the radio on, it actually shows >> channel 1. >> MR B Channel... I set it to "23", but it stays at "127" after I upload to >> radio. Interestingly enough, when I turn the radio on, it also shows >> channel 1. > > This is not a CHIRP issue. The hardware/firmware no longer > honors/supports the presetting of the channel. It apparently no longer > remembers the previously selected channel through a power cycle. > > Jim KC9HI > _______________________________________________ > Users mailing list > [email protected] > https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com > To unsubscribe, send an email to [email protected] > To report this email as off-topic, please email > [email protected] > List archives: > https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/ _______________________________________________ Users mailing list [email protected] https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] List archives: https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
