To make things more difficult, Chirp doesn't allow me to program in a frequency offset so the tx frequency has to be dialled in on the radio front panel.
> On 13/11/2025 20:13 EST Nigel A. Gunn G8IFF/W8IFF via Users > <[email protected]> wrote: > > > Chirp displays 8 columns on my radio. I'm assuming DCS, DTMF, Power and other > functions are just not supported by the radio. > As a comparison, mt 9700 displays 13 columns. > Chirp seems to only display those functions supported by the radio. > You might have to type them in by hand. > > > > On 13/11/2025 18:30 EST Jeffrey Vian via Users > > <[email protected]> wrote: > > > > > > You are correct, but the issue is that the table downloaded from the radio > > contains only limited columns while the repeaterbook table contains all the > > columns needed. > > > > The copy & paste step will put the data into the correct columns, but only > > those displayed in the radio tab. > > > > OTOH, exporting the radio table to a CSV file does contain all the > > appropriate columns as shown in the repeaterbook table, yet cannot input > > the data the same way. > > The repeater info does not get imported, only the simplex data. > > > > Jeff > > KI7GJG > > > > > > > > On Thu, Nov 13, 2025 at 9:01 AM Ken Hansen via Users < > > [email protected]> wrote: > > > > > Moving entries between tabs is not hard, let me try and help. > > > > > > Obviously, you download from the radio into chirp, so you have what I'll > > > call the "radio" tab. Then you go and query a data source (repeaterbook, > > > for example), and that creates what I'll call a "results" tab. > > > > > > Good so far? > > > > > > Now to move entries from the "results" tab to the radio tab you simply > > > highlight the entries in the "results" tab that you are interested in, > > > click on the Copy in the edit drop down (or Ctrl-C) to copy the entries > > > into a 'buffer', then go to the "radio" tab, and click on the frequency > > > box > > > where you want your first copied entry to be pasted, then click Paste in > > > the Edit drop down or press Ctrl-V, and the entries should be inserted. > > > > > > Hope that helps, > > > > > > Ken, N2VIP > > > > > > > On Nov 12, 2025, at 23:30, VE7MHI John D Erskine via Users < > > > [email protected]> wrote: > > > > > > > > I'm having difficulty moving or copy/pasting data from that table (in > > > the neighbouring tab) into the radio one. > > > _______________________________________________ > > > Users mailing list > > > [email protected] > > > https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com > > > To unsubscribe, send an email to [email protected] > > > To report this email as off-topic, please email > > > [email protected] > > > List archives: > > > https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/ > > > > > _______________________________________________ > > Users mailing list > > [email protected] > > https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com > > To unsubscribe, send an email to [email protected] > > To report this email as off-topic, please email > > [email protected] > > List archives: > > https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/ > _______________________________________________ > Users mailing list > [email protected] > https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com > To unsubscribe, send an email to [email protected] > To report this email as off-topic, please email > [email protected] > List archives: > https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/ _______________________________________________ Users mailing list [email protected] https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] List archives: https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
