> > On Sun, 16 Feb 2020 17:30:08 +0100 "Patrick Dupre" wrote: > >>> I suspect that you have specified the 3022 port fo connect to euripide > >>> in your ~/.ssh/config file. > > >> We should focus on runing vncviewer from the client machine to > >> euripide (running vncserver vith vncserver@:1.service) > > > Of course, I opened port 1 on euripide and port 9 on the other one > > (no name, it is why I use the ip address) > > Ok. > > >> No answer to that point :-( > > yes, because I do not have a ssh/config file > > I don't understand thus where this 3022 port came from. /etc/services ? csregagent 3022/tcp # CSREGAGENT
> > >>> The port 9 is that that I use for remmina > > >> Does this means that you change the way of starting vncserver and that > >> you start it now with: > > >> systemctl start vncserver@:9.service > > > No, > > No on euridice, but vncserver@:9.service on the other one right? > > > Here, I do not understand. This is what I get on both machines > > > systemctl start vncserver@:1.service > > ==== AUTHENTICATION COMPLETE ==== > > Weird message: AUTHENTICATION COMPLETE > > > systemctl status vncserver@:1.service > > ● vncserver@:1.service - Remote desktop service (VNC) > > Loaded: loaded (/etc/systemd/system/vncserver@.service; disabled; vendor > > preset: disabl> > > Active: failed (Result: exit-code) since Sun 2020-02-16 17:18:39 CET; > > 3min 27s ago > > Process: 11175 ExecStartPre=/bin/sh -c /usr/bin/vncserver -kill :1 > > > /dev/null 2>&1 || :> > > Process: 11177 ExecStart=/usr/bin/vncserver_wrapper pdupre :1 > > (code=exited, status=2) > > Main PID: 11177 (code=exited, status=2) > > > Feb 16 17:18:39 euripide systemd[1]: Starting Remote desktop service > > (VNC)... > > Feb 16 17:18:39 euripide systemd[1]: Started Remote desktop service (VNC). > > Feb 16 17:18:39 euripide vncserver_wrapper[11177]: A VNC server is already > > running as :1 > > Feb 16 17:18:39 euripide vncserver_wrapper[11177]: FATAL: 'runuser -l > > pdupre' failed! > > Feb 16 17:18:39 euripide systemd[1]: vncserver@:1.service: Main process > > exited, code=exite> > > Feb 16 17:18:39 euripide systemd[1]: vncserver@:1.service: Failed with > > result 'exit-code'. > > On euridice, can you identify the process running on port 5901? > > lsof -i tcp:5901 lsof -i tcp:5901 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME Xvnc 10283 pdupre 6u IPv4 203381 0t0 TCP *:5901 (LISTEN) Xvnc 10283 pdupre 7u IPv6 203382 0t0 TCP *:5901 (LISTEN) > >>> the ~/.vnc/xstartup file is the same on both machine > > >> What do you start in it? > > > I check because on one of the machine, remmina gives me a blue > > screen only, while the other one provides me the expected screen > > (gnome). > > I have seen failures to spawn two cinnamon sessions at the same time > (for the same user): a native one and a VNC one. This is perhaps the > same with gnome. To investigate after having fixed the failure of > vncserver@:1.service on euridice. This I have no idea On euripide: systemctl status vncserver@:1.service ● vncserver@:1.service - Remote desktop service (VNC) Loaded: loaded (/etc/systemd/system/vncserver@.service; disabled; vendor preset: disabled) Active: failed (Result: exit-code) since Sun 2020-02-16 17:24:17 CET; 1h 57min ago Process: 11248 ExecStartPre=/bin/sh -c /usr/bin/vncserver -kill :1 > /dev/null 2>&1 || : (code=exited, status=0/SUCCESS) Process: 11250 ExecStart=/usr/bin/vncserver_wrapper pdupre :1 (code=exited, status=2) Main PID: 11250 (code=exited, status=2) Feb 16 17:24:17 euripide systemd[1]: Starting Remote desktop service (VNC)... Feb 16 17:24:17 euripide systemd[1]: Started Remote desktop service (VNC). Feb 16 17:24:17 euripide vncserver_wrapper[11250]: A VNC server is already running as :1 Feb 16 17:24:17 euripide vncserver_wrapper[11250]: FATAL: 'runuser -l pdupre' failed! Feb 16 17:24:17 euripide systemd[1]: vncserver@:1.service: Main process exited, code=exited, status=2/INVALIDARGUMENT Feb 16 17:24:17 euripide systemd[1]: vncserver@:1.service: Failed with result 'exit-code'. on the other one: systemctl status vncserver@:9.service ● vncserver@:9.service - Remote desktop service (VNC) Loaded: loaded (/usr/lib/systemd/system/vncserver@.service; disabled; vendor preset: disabled) Active: inactive (dead) > > In addition, what is your remmina setup? Not using SSH I guess. I always run remmina in VNC viewer mode, in ssh tunnel > > -- > francis > _______________________________________________ > users mailing list -- users@lists.fedoraproject.org > To unsubscribe send an email to users-le...@lists.fedoraproject.org > Fedora Code of Conduct: > https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: > https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org > _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org