Hello all together,
according to "Genode OS Framework release 20.11" SculptOS can run on the
i.MX8MQ EVK board.
I wanted to run the example so I did the following steps:
1)start the run Sculpt run-script
tool/create_builddir arm_v8a
cd build/arm_v8a
make run/sculpt KERNEL=hw BOARD=imx8q_evk
-after this a have an "image.elf" file in
"BUILD_DIR/var/run/sculpt/boot" directory.
2)copy in the SD-Card
dd if=image.elf of=/dev/"mySDcard" bs=1k seek=33 conv=fsync
3)select the boot device in the board
Boot-Mode[3:0] = 0011 (SD card)
The board is connected to a HDMI monitor. Unfortunately I don't get any log
information.
Maybe am I missing some middle steps or doing something wrong?
Any help is very welcomed!
Best regard,
Christo
_______________________________________________
Genode users mailing list
[email protected]
https://lists.genode.org/listinfo/users
