Hello Christian,
I was probably expressed wrong. Want I meant is, the board it does not boot. I
know the board is functional because
I firstly tried to boot the Android image from the eMMC and it worked. So I am
definitely doing something very
wrong or missing some step in between while preparing the SD card with the
SculptOS image.
No hint or help is trivial as I am quite a beginner.
Thanks in advance!
Best regards,
Christo
Am Fr., Dez. 4, 2020 02:59 PM schrieb Christian Helmuth :
Hello Christo,
maybe my hint sounds trivial but keep in mind that Genode log messages
are not printed to the HDMI screen but only available on the
UART/serial line.
Greets
--
Christian Helmuth
Genode Labs
https://www.genode-labs.com/ (https://www.genode-labs.com/) ·
https://genode.org/ (https://genode.org/)
https://twitter.com/GenodeLabs (https://twitter.com/GenodeLabs) · /ˈdʒiː.nəʊd/
Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth
_______________________________________________
Genode users mailing list
[email protected] (mailto:[email protected])
https://lists.genode.org/listinfo/users
(https://lists.genode.org/listinfo/users)
_______________________________________________
Genode users mailing list
[email protected]
https://lists.genode.org/listinfo/users
