Ok i Will try this. I need to launch vnc viewer from node? Le 15 déc. 2010 à 18:06, Jaime Melis <j.me...@fdi.ucm.es> a écrit :
> Hi Christophe, > > I've been reading the thread but I think your configuration looks > correct. Can you give it a shot at using VNC to see if the VM is > booting up correctly? Maybe there's a problem with the VM... > > Add the following to your ONE template: > > GRAPHICS = [ > TYPE = "vnc", > LISTEN = "0.0.0.0", > PORT = "5900"] > > Start the VM and connect to it via a VNC client (for instance > vncviewer). Inspect the VM to see if there's a problem with it. > > Regards, > Jaime > > > > > On Wed, Dec 15, 2010 at 4:47 PM, Christophe Hamerling - Petals Link > <christophe.hamerl...@petalslink.com> wrote: >> I am wondering if the problem does not also comes from the virtual network >> configuration. >> Here is my configuration : >> I am at home, my LAN address is 192.168.2.0/255.255.255.0 . GW is >> 192.168.2.1 >> My front address is 192.168.2.60 and the node one is 192.168.2.61 >> I tried to setup a bridge on the node, it seems to work (refer to my >> previous mails). >> I try to create a VM and to reach it at 192.168.2.71 but I am wondering now >> if it is possible to access a VM network from my laptop for exemple? How can >> I say to opennebula that I want to 'publish' VMs on my LAN? Is PUBLIC = YES >> is enough in the network configuration file? Do I need to put the front as a >> gateway somewhere, or another host? >> Thanks a lot >> Christophe >> >> On Wed, Dec 15, 2010 at 3:59 PM, Christophe Hamerling - Petals Link >> <christophe.hamerl...@petalslink.com> wrote: >>> >>> Is there a link between the MAC address defined in the VM and with the >>> ones listed with ifconfig on the node? I do not have any. >>> >>> On Wed, Dec 15, 2010 at 3:46 PM, Christophe Hamerling - Petals Link >>> <christophe.hamerl...@petalslink.com> wrote: >>>> >>>> Is there a web page where the network configuration on front and nodes is >>>> described? The only thing that I can find is >>>> at >>>> http://marianmi.comp.nus.edu.sg/2010/08/opennebula-installation-and-configuration-guide.php >>>> I really think that it is a network configuration problem. Here is what I >>>> did : >>>> Front : eth0 = 192.168.2.60 >>>> On the Node : br0 = 192.168.2.61 >>>> The gateway defined to 192.168.2.60, not sure about that. Using my >>>> internet box as gateway does not work too. >>>> I defined a LEASES address out of my DHCP range. >>>> When the VM is starting, I can see on the node a new network interface >>>> named vnet0 with the same mac address of my bridge. Is it ok? >>>> Before the VM start, the br0 mac address is the same as eth0... Is this a >>>> normal behaviour? >>>> Here is my ifconfig log >>>> br0 Link encap:Ethernet HWaddr 00:ff:da:72:02:21 >>>> inet adr:192.168.2.61 Bcast:192.168.2.255 >>>> Masque:255.255.255.0 >>>> adr inet6: fe80::a00:27ff:fed7:f0fd/64 Scope:Lien >>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>>> RX packets:787 errors:0 dropped:0 overruns:0 frame:0 >>>> TX packets:500 errors:0 dropped:0 overruns:0 carrier:0 >>>> collisions:0 lg file transmission:0 >>>> RX bytes:126978 (124.0 KiB) TX bytes:81984 (80.0 KiB) >>>> eth0 Link encap:Ethernet HWaddr 08:00:27:d7:f0:fd >>>> adr inet6: fe80::a00:27ff:fed7:f0fd/64 Scope:Lien >>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>>> RX packets:1268 errors:0 dropped:0 overruns:0 frame:0 >>>> TX packets:506 errors:0 dropped:0 overruns:0 carrier:0 >>>> collisions:0 lg file transmission:1000 >>>> RX bytes:188739 (184.3 KiB) TX bytes:82452 (80.5 KiB) >>>> lo Link encap:Boucle locale >>>> inet adr:127.0.0.1 Masque:255.0.0.0 >>>> adr inet6: ::1/128 Scope:Hôte >>>> UP LOOPBACK RUNNING MTU:16436 Metric:1 >>>> RX packets:28 errors:0 dropped:0 overruns:0 frame:0 >>>> TX packets:28 errors:0 dropped:0 overruns:0 carrier:0 >>>> collisions:0 lg file transmission:0 >>>> RX bytes:2156 (2.1 KiB) TX bytes:2156 (2.1 KiB) >>>> vnet0 Link encap:Ethernet HWaddr 00:ff:da:72:02:21 >>>> adr inet6: fe80::2ff:daff:fe72:221/64 Scope:Lien >>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>>> TX packets:226 errors:0 dropped:0 overruns:0 carrier:0 >>>> collisions:0 lg file transmission:500 >>>> RX bytes:0 (0.0 B) TX bytes:38791 (37.8 KiB) >>>> >>>> >>>> >>>> On Wed, Dec 15, 2010 at 11:37 AM, Gian Uberto Lauri <sa...@eng.it> wrote: >>>>>>>>>> >>>>>>>>>> "CH" == Christophe Hamerling <- Petals Link >>>>>>>>>> <christophe.hamerl...@petalslink.com>> writes: >>>>> >>>>> CH> Ok, so I will check that the generated IP is the one expected from >>>>> CH> the leases list based on this script algorithm. Is the VM is >>>>> CH> exploded somewhere at startup? If yes, where? >>>>> >>>>> No, it is not. >>>>> >>>>> A _new_, temporary "cd image" is created on the fly and mounted at the >>>>> first boot, AFAIK. >>>>> >>>>> -- >>>>> ing. Gian Uberto Lauri >>>>> Ricercatore / Reasearcher >>>>> Divisione Ricerca ed Innovazione / Research & Innovation Division >>>>> gianuberto.la...@eng.it >>>>> >>>>> Engineering Ingegneria Informatica spa >>>>> Corso Stati Uniti 23/C, 35127 Padova (PD) >>>>> >>>>> Tel. +39-049.8283.538 | main(){printf(&unix["\021%six\012\0"], >>>>> Fax +39-049.8283.569 | (unix)["have"]+"fun"-0x60);} >>>>> Skype: gian.uberto.lauri | David Korn, AT&T Bell Labs >>>>> http://www.eng.it | ioccc best One >>>>> Liner, 1987 >>>>> >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users@lists.opennebula.org >>>>> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >>>> >>>> >>>> >>>> -- >>>> Christophe Hamerling >>>> R&D Engineer & Project Leader >>>> Petals Link - SOA open-source company >>>> OW2 PEtALS SOA Suite Comitter >>>> Skype : christophe.hamerling >>>> Jabber : chamerl...@jabber.org >>>> Blog : http://chamerling.org >>> >>> >>> >>> -- >>> Christophe Hamerling >>> R&D Engineer & Project Leader >>> Petals Link - SOA open-source company >>> OW2 PEtALS SOA Suite Comitter >>> Skype : christophe.hamerling >>> Jabber : chamerl...@jabber.org >>> Blog : http://chamerling.org >> >> >> >> -- >> Christophe Hamerling >> R&D Engineer & Project Leader >> Petals Link - SOA open-source company >> OW2 PEtALS SOA Suite Comitter >> Skype : christophe.hamerling >> Jabber : chamerl...@jabber.org >> Blog : http://chamerling.org >> >> _______________________________________________ >> Users mailing list >> Users@lists.opennebula.org >> http://lists.opennebula.org/listinfo.cgi/users-opennebula.org >> >> > > > > -- > Jaime Melis, Cloud Technology Engineer/Researcher > DSA Research Group: web http://dsa-research.org and blog > http://blog.dsa-research.org > OpenNebula Open Source Toolkit for Cloud Computing: http://www.OpenNebula.org _______________________________________________ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org