As an update, the load balancer probe appears to use the ip address specified by the first listen= directive.
If I list the public IP first, then the probe tries to talk to the internal IP from the external interface IP. On 11/7/10 6:18 PM, Bill W. wrote: > Hello everyone, > > I've got an opensips-1.6.3-tls installation using multiple interfaces > and load balancing. > > My internal interface is rfc1918 space and my external interface has > public IPs. > listen=udp:10.0.10.3:5060 > listen=udp:66.180.205.3:5060 > > > I have the following load_balancer configuration: > id | group_id | dst_uri | probe_mode > ----+----------+-------------------+------------ > 1 | 1 | sip:66.180.205.11 | 2 > 2 | 1 | sip:66.180.205.12 | 2 > 3 | 2 | sip:10.0.10.1 | 2 > 4 | 2 | sip:10.0.10.2 | 2 > > > What's happening is that the load balancer is trying to probe the public > IPs from the private interface IP (and failing of course). > > tcpdump output on internal interface: > 18:13:26.471734 IP 10.0.10.3.5060 > 66.180.205.11.5060: SIP, length: > 18:13:28.473802 IP 10.0.10.3.5060 > 66.180.205.11.5060: SIP, length: > > > Thoughts? > > Thanks, > Bill > > _______________________________________________ > Users mailing list > Users@lists.opensips.org > http://lists.opensips.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users