Hi Bill, as you have a multi interface system, have you tried to enable the "mhomed" global parameter? http://www.opensips.org/Resources/DocsCoreFcn16#toc60
Regards, Bogdan Bill W. wrote: > As an update, the load balancer probe appears to use the ip address > specified by the first listen= directive. > > If I list the public IP first, then the probe tries to talk to the > internal IP from the external interface IP. > > > On 11/7/10 6:18 PM, Bill W. wrote: > >> Hello everyone, >> >> I've got an opensips-1.6.3-tls installation using multiple interfaces >> and load balancing. >> >> My internal interface is rfc1918 space and my external interface has >> public IPs. >> listen=udp:10.0.10.3:5060 >> listen=udp:66.180.205.3:5060 >> >> >> I have the following load_balancer configuration: >> id | group_id | dst_uri | probe_mode >> ----+----------+-------------------+------------ >> 1 | 1 | sip:66.180.205.11 | 2 >> 2 | 1 | sip:66.180.205.12 | 2 >> 3 | 2 | sip:10.0.10.1 | 2 >> 4 | 2 | sip:10.0.10.2 | 2 >> >> >> What's happening is that the load balancer is trying to probe the public >> IPs from the private interface IP (and failing of course). >> >> tcpdump output on internal interface: >> 18:13:26.471734 IP 10.0.10.3.5060 > 66.180.205.11.5060: SIP, length: >> 18:13:28.473802 IP 10.0.10.3.5060 > 66.180.205.11.5060: SIP, length: >> >> >> Thoughts? >> >> Thanks, >> Bill >> >> _______________________________________________ >> Users mailing list >> Users@lists.opensips.org >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> > > _______________________________________________ > Users mailing list > Users@lists.opensips.org > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > -- Bogdan-Andrei Iancu OpenSIPS Bootcamp 15 - 19 November 2010, Edison, New Jersey, USA www.voice-system.ro _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users