Jeff,
To have the CP connecting to OpenSIPS you can use any of the MI backends
- FIFO, XMLRPC, UDP...any will do the trick. The downside of FIFO is
that the CP and OpenSIPS must be on the same server.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 09.06.2016 17:38, Jeff Wilkie wrote:
Is XMLRPC required to make this function work? Currently, we are only
using the fifo method as the boxes.global.inc.php only referencing
this method. The documentation for CP says to use one or the other
but does not mention that some functions will not work if not using
XMLRPC.
Thanks
Jeff
Jeff Wilkie
Chief Technology Officer
US IP Communications
919.297.1057
/"This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. Any files transmitted with
it are confidential and intended solely for the use of the individual
to whom it is addressed. Any views or opinions presented are solely
those of the author and do not necessarily represent those of USIPCOM,
LLC. If you are not the intended addressee, you are hereby notified
that you have received this communication in error and that any use or
reproduction of this email or its contents is strictly prohibited and
may be unlawful. If you have received this communication in error,
please notify us immediately by replying to this message and deleting
it from your computer. Thank you". /
On Tue, Jun 7, 2016 at 6:52 AM, Bogdan-Andrei Iancu
<bog...@opensips.org <mailto:bog...@opensips.org>> wrote:
Hi Jeff,
So, FIFO works ok for you, but CP (using xmlrpc fails). Can you
make a capture of the XMLRPC traffic between CP and OpenSIPS and
post it somewhere ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 31.05.2016 17:27, Jeff Wilkie wrote:
OpenSIPS Control Panel version 5.0
Jeff Wilkie
Chief Technology Officer
US IP Communications
919.297.1057 <tel:919.297.1057>
/"This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. Any files transmitted
with it are confidential and intended solely for the use of the
individual to whom it is addressed. Any views or opinions
presented are solely those of the author and do not necessarily
represent those of USIPCOM, LLC. If you are not the intended
addressee, you are hereby notified that you have received this
communication in error and that any use or reproduction of this
email or its contents is strictly prohibited and may be unlawful.
If you have received this communication in error, please notify
us immediately by replying to this message and deleting it from
your computer. Thank you". /
On Tue, May 31, 2016 at 3:28 AM, Bogdan-Andrei Iancu
<bog...@opensips.org <mailto:bog...@opensips.org>> wrote:
Hi Jeff,
What OpenSIPS Control Panel version are you using ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com
On 21.05.2016 00:15, Jeff Wilkie wrote:
OPENSIPS 1.10.x
I have the following set
opensips.cfg
#### FIFO Management Interface
loadmodule "mi_fifo.so"
modparam("mi_fifo", "fifo_name", "/tmp/opensips_proxy_fifo")
modparam("mi_fifo", "fifo_mode", 0666)
opensipsctlrc
## path to FIFO file
OSIPS_FIFO="/tmp/opensips_proxy_fifo"
Attempting to disable gateways via the CP gives the
following errors:
From DROUTING-Gateway interface:
Error while disabling gateway 2
(the GWID is 2 for the gateway I'm attempting to disable)
From the MI Commands:
Initiating the following command: *dr_gw_status 2 0*
404 GW ID not found
From the DROUTING-Gateway interface I am able to enable the
interface if it is disabled
I'm able to also enable the Gateway from the MI Commands
section.
I'm also able to enable and disable the Gateway using
opensipsctl fifo commands
opensipsctl fifo dr_gw_status 2
Enabled:: yes
opensipsctl fifo dr_gw_status 2 0
opensipsctl fifo dr_gw_status 2
Enabled:: no
opensipsctl fifo dr_gw_status 2 1
opensipsctl fifo dr_gw_status 2
Enabled:: yes
Not sure where the problem is but I feel its somewhere in
the syntax of how its delivered. I'm sure it's something
easy I've overlooked. Any help on this?
Thanks
Jeff
_______________________________________________
Users mailing list
Users@lists.opensips.org <mailto:Users@lists.opensips.org>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
