Hello Pierre, This change was introduced 6 months ago and is coherent to the default scope window for a beginner. This is the default settings that apply only to any new schema, for any saved Xcos diagram the previous value should be preserved; if not please report a bug.
Note: while investigating your issue, I tested the Xcos preferences and it failed to set up a default final simulation time; this is a bug reported at http://bugzilla.scilab.org/show_bug.cgi?id=16336 Regards, -- Clément From: users <users-boun...@lists.scilab.org> On Behalf Of Perrichon Sent: Tuesday, February 25, 2020 5:04 PM To: 'Users mailing list for Scilab' <users@lists.scilab.org> Subject: Re: [Scilab-users] several problems with xcos scilab 6.1.0 For Kaplan turbine time simulation is 600s at least. Why the default time is 30 s ? Please program it at + infinity that is 10000000 s. De : Perrichon <perrichon.pie...@wanadoo.fr<mailto:perrichon.pie...@wanadoo.fr>> Envoyé : mardi 25 février 2020 16:57 À : 'Users mailing list for Scilab' <users@lists.scilab.org<mailto:users@lists.scilab.org>> Objet : several problems with xcos scilab 6.1.0 Hello, Even if it is minor, apparently somebody has decided to define the time simulation to 30 s by default. Why ? I don't know Before, it was 1.0E05 s and I stop the simulation with the END box in my main scheme. (to avoid user to go on this menu and choose another solver, at least). (choose is Newton for me , so the default one) So I've hundred shemes to see And this is not the first surprise. Others tests don't work anymore I can do tests to correct that, but it was not foreseen. I still believe to go on with 6.1.0 but keep aware because not so clear with xcos Pierre P.
_______________________________________________ users mailing list users@lists.scilab.org http://lists.scilab.org/mailman/listinfo/users
