Hello Nuno, Have you compiled and installed the Extras in the CVS source code of mbuni (there is where there the library is)
Best Regards!!. 2009/8/28 Nuno Freitas <[email protected]> > Hello, > I'm Nuno, and I been trying to use Mbuni. > > I have a GSM/GPRS modem whit a MMSable SIM card connected to Linux machine > that is able to receive and send SMS messages. > I'm using the latest Mbuni from the CVS and I was able to deliver > successfully a WAP Push notification, although the download of the MMS > failed. > My primary goal is to receive the MMS on the computer thru the GSM modem. > Kannel do get the notification but from the mbuni side no reaction is > visible. > I am trying to run the mmsbox but I keep getting this Error on the logs > > ERROR: mmsbox_cfg.c:606 <start_mmsc_from_conf> [mmsbox] [n/a] failed to > load > MMSC libary functions from module! > > I think is easy to point the origin of the error in the config file > mmsbox.conf on the field mmsc-library that is commented > [...] > # Sample conf for MMSBox using a modem (MM1) > group = mmsc > id = modem > type = custom > custom-settings = "smsc-on=lynx -dump > ' > http://localhost:13013/start-smsc?password=nabia&smsc=siemens_tc35';smsc-of > f=lynx -dump > ' > http://localhost:13013/stop-smsc?password=nabia&smsc=siemens_tc35';gprs-on= > /usr/local/sbin/start-net-gprs;gprs-pid=cat /var/run/ppp-net.pid|head > -1;port=13013;mmsc-url= > http://net.mmsc/servlets/mms;proxy=10.11.12.13:8080;m > sisdn=100" > #mmsc-library = /usr/local/lib/libmmsbox_mm1.so > [...] > > But I can't find libmmsbox_mm1.so anywhere, neither a way to build it. > Would like any advice you can give. > Another thing I would like to ask is if I do need a pppd connection if I > only need to receive MMS. > > Thanks for reading and in advance for any help you can give. > > > Here goes the configurations files > ----------- > mmsbox.conf > ----------- > > group = core > log-file = /etc/mbuni/log/mmsbox.log > access-log = /etc/mbuni/log/mmsbox-access.log > log-level = 0 > > group = mbuni > storage-directory = /xxx/xxx/storage > max-send-threads = 5 > maximum-send-attempts = 50 > default-message-expiry = 360000 > queue-run-interval = 5 > send-attempt-back-off = 300 > sendmms-port = 10001 > > #group = mmsc > #id = local > #mmsc-url = http://mbuni:t...@localhost:1982/soap > #incoming-username = xxxx > #incoming-password = xxxx > #incoming-port = 10002 > #type = soap > > # Sample conf for MMSBox using a modem (MM1) > group = mmsc > id = modem > type = custom > #type = eaif > custom-settings = "smsc-on=lynx -dump > ' > http://localhost:13013/start-smsc?password=nabia&smsc=siemens_tc35';smsc-of > f=lynx -dump > ' > http://localhost:13013/stop-smsc?password=nabia&smsc=siemens_tc35';gprs-on= > /usr/local/sbin/start-net-gprs;gprs-pid=cat /var/run/ppp-net.pid|head > -1;port=13013;mmsc-url= > http://net.mmsc/servlets/mms;proxy=10.11.12.13:8080;m > sisdn=100" > #mmsc-library = /usr/local/lib/libmmsbox_mm1.so > > > #group = mms-service > #name = me > #post-url = http://localhost/~bagyenda/test-mbuni.php > #catch-all = true > #http-post-parameters = fx=true&images[]=%i&text[]=%t&skip=1 > #accept-x-mbuni-headers = true > #pass-thro-headers = X-NOKIA-MMSC-Charging,X-NOKIA-MMSC-Charged-Party > #keyword = test > #omit-empty = no > #suppress-reply = true > #service-code = regular > > #group = mms-service > #name = fullmessage > #get-url = http://localhost/images/apache_pb.gif > # http-post-parameters = fx=true&image=%i&text=%t > #accept-x-mbuni-headers = true > #keyword = thixs > > group = mms-service > name = fullmessage > get-url = > http://xxx.xxx.xxx.xxx:xx > /xxx/xxx?epochtime=%T&sender=%p&text=%a&charset=%C& > encoding=%c&udh=%u > catch-all = true > # http-post-parameters = fx=true&image=%i&text=%t > accept-x-mbuni-headers = true > keyword =* > > group = send-mms-user > username = xxxx > password = xxxx > faked-sender = 100 > > #end of mmsbox.conf > > > ----------- > kannel.conf > ----------- > #--------------------------------------------- > # CORE > # > > group = core > admin-port = 13001 > wapbox-port = 13002 > admin-password = bar > #admin-deny-ip = "*.*.*.*" > #admin-allow-ip = "127.0.0.1" > smsbox-port = 13005 > wdp-interface-name = "*" > log-file = "bearerbox.log" > log-level = 0 > #box-deny-ip = "*.*.*.*" > #box-allow-ip = "127.0.0.1" > #dlr-storage = mysql > > > #--------------------------------------------- > # SMSC CONNECTIONS > # > > > group = smsc > smsc = at > modemtype = auto > device = /dev/ttyS0 > speed = 9600 > smsc-id = siemens_tc35 > my-number = 00351xxxxxxx > connect-allow-ip = "127.0.0.1" > log-file = "smsc.log" > sim-buffering = true > #host = 127.0.0.1 > #port = 13013 > > > > > #--------------------------------------------- > # SMSBOX SETUP > # > # Smsbox(es) do higher-level SMS handling after they have been received > from > # SMS centers by bearerbox, or before they are given to bearerbox for > delivery > > group = smsbox > bearerbox-host = localhost > sendsms-port = 13013 > global-sender = 003519xxxxx > log-file = "smsbox.log" > log-level = 1 > > > #--------------------------------------------- > # SEND-SMS USERS > # > > group = sendsms-user > username = xxxx > password = xxxx > concatenation = true > max-messages = 10 > #user-deny-ip = "" > #user-allow-ip = "" > > #--------------------------------------------- > # SERVICES > # > > group = sms-service > keyword-regex =.* > catch-all = yes > get-url = > http://xxx.xxx.xxx.xxx:xx > /xxxx/xxx?epochtime=%T&sender=%p&text=%a&charset=%C > &encoding=%c&udh=%u > max-messages = 0 > concatenation = true > #faked-sender = 1234 > > # There should be always a 'default' service. This service is used when no > # other 'sms-service' is applied. > > group = sms-service > keyword = default > #accepted-smsc = "siemenstc35i" > #max-messages = 0 > text = "No service specified" > > include = "/etc/kannel/wapbox.conf" > ## MODEM > > include = "/etc/kannel/modems.conf" > > #end of Kannel.conf > > ----------- > modems.conf > ----------- > > > #default modem > group = modems > id = generic > name = "Generic Modem" > > group = modems > id = siemens_tc35 > name = "Siemens TC35" > detect-string = "SIEMENS" > detect-string2 = "TC35" > #init-string = "AT+CNMI=1,2,0,1,1" > init-string = "AT+CNMI=3,2,0,1,1" > speed = 19200 > enable-hwhs = "AT\\Q3" > need-sleep = true > > #end of modems.conf > > ----------- > wapbox.conf > ----------- > > group = wapbox > bearerbox-host = localhost > log-file = "/var/log/wapbox.log" > log-level = 0 > syslog-level = none > timer-freq = 10 > map-url = "http://mmsc/* http://localhost:1981/*"; > > #end of wapbox.conf > > _______________________________________________ > Users mailing list > [email protected] > http://lists.mbuni.org/mailman/listinfo/users > -- Juan Camilo Tamayo PATH S.A Calle 7 sur No. 42-70 Of. 1213 Medellín – Colombia Tel: +57 4 321 8928 Ext. 103 Cel: +57 3002492249 Fax: +57 4 321 8928 Ext. 102 [email protected] www.pathsa.com AVISO: Esta comunicación puede contener información confidencial. Si el mensaje no iba destinado a Usted o cree que lo ha recibido por error, por favor, no lo imprima, copie, distribuya o haga uso del mismo. Por favor, comunique al remitente que ha recibido esta comunicación por error y elimine la copia recibida. Muchas Gracias. NOTICE: This communication may contain confidential information. If you are not the intended recipient, or believe that you have received this communication in error, please do not print, copy, retransmit, disseminate, or otherwise use the information. Also, please indicate to the sender that you have received this communication in error, and delete the copy you received. Thank you.
_______________________________________________ Users mailing list [email protected] http://lists.mbuni.org/mailman/listinfo/users
