Hi Klaus,
I just added (on cvs) more debug messages in auth_radius when extracting
AVPs. As I have no access to an auth RADIUS server, please give it a try
and send my the debug output.
regards,
bogdan
Klaus Darilion wrote:
Hi!
I'm using openser CVS and try to deliver the rpid using auth_radius.
But the rpid never appears in the AVPs. Also other AVP-SIP attributes
(e.g. SIP-AVP = #101:TEST) do not appear in the AVP.
Filling AVPs in the .cfg using avp_write("$ruri/username","$ruser");
works fine and are printed with avp_print.
Any ideas how I can track down this problem?
thanks
klaus
The radius server responds with a SIP-AVP (225) attribute (verfied
with tcpdump):
rpid:<sip:[EMAIL PROTECTED]>
my cfg snippet (full config attached):
if (!radius_proxy_authorize("")) {
xlog("L_WARN","wrong or no credentials - challenging client ...");
proxy_challenge("", "0");
exit;
};
xlog("L_WARN","start avp_print()-");
avp_print();
xlog("L_WARN","stop avp_print()--");
the debug log:
8(5807) checking REGISTER authentication ... 8(5807) check_nonce():
comparing [42e78dca8153d605c63042be302f64af00e1abfc] and
[42e78dca8153d605c63042be302f64af00e1abfc]
8(5807) DEBUG:auth_radius:radius_authorize_sterman: Success
8(5807) xl_printf: final buffer length 37
8(5807) start avp_print() - 8(5807) xl_printf: final buffer length 37
8(5807) stop avp_print() -- 8(5807) xl_printf: final buffer length 58
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
