As mentioned earlier, This problem happens with only some terminating
gateway and in certain scenarios only.

Regards
Dan

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Iñaki Baz Castillo
Sent: Wednesday, September 05, 2007 1:19 PM
To: users@openser.org
Subject: Re: [OpenSER-Users] Opnser rejecting BYE packet

El Tuesday 04 September 2007 15:37:46 Iñaki Baz Castillo escribió:
> El Tuesday 04 September 2007 15:03:25 Dan escribió:
> > Full ngrep log attached.
>
> In the INVITE OpenSEr sends to your provider is appears:
>
>
>   ## U 78.45.146.34:5060 -> 212.34.169.220:5060
>   INVITE sip:[EMAIL PROTECTED]:5060 SIP/2.0.
>   Record-Route: <sip:78.45.146.34;ftag=6613ce14;lr>.
>   To: <sip:[EMAIL PROTECTED]>.
>   From: 58.68.96.11<sip:[EMAIL PROTECTED]>;tag=6613ce14.
>   Call-ID: 757a270529254e41.
>   ...
>   Contact: <sip:[EMAIL PROTECTED]:5060>   <---- **1**
>
>
> But in the BYE from your provider it appears:
>
>
>   ## U 212.34.169.220:5060 -> 78.45.146.34:5060
>   BYE sip:[EMAIL PROTECTED] SIP/2.0.   <---- **2**
>   Route: <sip:78.45.146.34;ftag=6613ce14;lr>.
>   From: <sip:[EMAIL PROTECTED]>;tag=04093807084639921117967993.
>   Call-ID: 757a270529254e41.
>   To: 58.68.96.11<sip:[EMAIL PROTECTED]>;tag=6613ce14.
>   ...
>
> That is wrong, the **2** field should be the same as **1** in order to
> OpenSer route the BYE to EyeBeam. Because the URI is 78.45.146.34
> (OpenSer's IP) then the BYE arrives to OpenSer, it reads "Route:
> 78.45.146.34" so it deletes the "Route" header and sends again the BYE to
> himself. But this time there is not a "Route" header so the message is NOT
> in dialog.


I'd like to insist on this. The problem is there: the provider SHOULD send
the 
BYE (in-dialog BYE containing "Route" header) to the URI indicated in 
the "Contact" header that OpenSer sent to provider.
But instead of that, the provider sens the BYE to a wrong URI 
(sip:[EMAIL PROTECTED]).

Could you do a ngrep when a call from PAP2 to other PAP2?
  ngrep -d any -P ' ' -W byline -T -t "$*" udp port 5060






-- 
Iñaki Baz Castillo
[EMAIL PROTECTED]

_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users


_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users

Reply via email to