One change, the call to seturi is actually: seturi("sip:[EMAIL PROTECTED]:6010");
On 9/13/07, Tim Madorma <[EMAIL PROTECTED]> wrote: > Hi, > > I have a simple application where I am trying to an SRV record to load > balance towards a few different destination servers. > > I set up my DNS server to resolve to four different destination A > record URIs - something like: > > _sip._udp.aimcidfilter.com 180 IN SRV 1 50 5061 crunch.com. > _sip._udp.aimcidfilter.com 180 IN SRV 1 50 5061 spinner.com. > _sip._udp.aimcidfilter.com 180 IN SRV 2 50 5061 homer.com. > _sip._udp.aimcidfilter.com 180 IN SRV 2 50 5061 bart.com. > > In my configuration file, I am putting a domain name in my call to > seturi as follows: > > seturi("sip:[EMAIL PROTECTED]:6010"); > > and then I call route to send the INVITE. > > I was expecting to see a NAPTR and SRV record attempts, but when I > sniffed DNS, I only saw A record attempts. > > Any advice would be very helpful. > > thanks, > Tim > > ------------------------------------ > > My configuration file looks as follows: > > # > # TWC OpenSER SIP Proxy for Caller ID - openser_cid.cfg > # > # ----------- global configuration parameters ------------------------ > > debug=5 # debug level (cmd line: -dddddddddd) > fork=yes > log_stderror=no # (cmd line: -E) > > maxbuffer=1048576 > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > #reply_to_via=1 > children=4 > log_facility=LOG_LOCAL4 > dns_use_search_list=no > dns_servers_no=2 # One for the ENUM server and one for other DNS lookups > user="sipproxy" > group="sipproxy" > disable_dns_blacklist=yes # FOR TESTING ONLY > dns_try_ipv6=no # FOR TESTING ONLY > > # Local IP Address and port to listen to > # Set the following IP addresses to the value of the local e1000g0 interface > listen=udp:65.185.232.62:5060 > > # Alias IP address/port pair values will be in the Req URI when the > # OpenSER is being load balanced with a BIG IP server > # Set the IP addresses to the value of the associated blade > # of the BIG IP that is load balancing for the SIP Proxy server. > alias=65.185.233.104:5060 > > # LOAD OpenSER MODULES > mpath="/sw/lib/openser/modules/" > loadmodule "sl.so" > loadmodule "tm.so" > loadmodule "rr.so" > loadmodule "maxfwd.so" > loadmodule "usrloc.so" > loadmodule "registrar.so" > loadmodule "textops.so" > loadmodule "acc.so" > loadmodule "mi_fifo.so" > loadmodule "xlog.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > modparam("usrloc", "db_mode", 0) > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # ------------------------- request routing logic ------------------- > modparam("acc", "log_level", 2) > modparam("acc", "log_flag", 1) > modparam("acc","report_cancels", 1) > modparam("acc","failed_transaction_flag", 1) > modparam("acc","log_extra", "req_uri=$rU") > modparam("tm", "fr_timer", 5) > modparam("tm","fr_inv_timer",5) > modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") > > # main routing logic > > route{ > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > exit; > }; > > if (msg:len >= 2048 ) { > sl_send_reply("513", "Message too big"); > exit; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > if (!method=="REGISTER") > record_route(); > > # subsequent messages within a dialog should take the > # path determined by record-routing > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > }; > > if (!uri==myself) { > route(1); > }; > > if (method=="OPTIONS") { > sl_send_reply("200", "OK"); > exit; > } > > if (uri =~ "^sip:feature_fs@" || method=="NOTIFY") { > xlog("L_DBG", "TWC: received incoming message:\n <$mb>\n"); > seturi("sip:[EMAIL PROTECTED]:6010"); > setflag(1); > route(1); > } else { > sl_send_reply("404", "Not Found"); > }; > } > > ##################################################### > # Default Message Handler > ##################################################### > route[1] { > > # Send it out now; use stateful forwarding as it works reliably > # even for UDP2TCP > if (!t_relay()) { > sl_reply_error(); > }; > exit; > } > _______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users