Hey Klaus/Mark, here is the configuration I have used in the past. It has been a while, so I do hope I remember it corectly:
In dial-peer voip (the one routing the call coming from pstn to media streaming source: dial-peer voice 10000 voip destination-pattern 10.... progress_ind setup enable 3 This command should force the gateway considering that the call came from PSTN with a progress indicator = 3 in the setup message, which should be interpreted that the originator is non isdn and inband messages are expected. Alternatively, one could also force an incoming pots dial-peer match, which will do some additional work by forcing the cut-through in one way (progress_ind alert enable 8): dial-peer voice 1000 pots destination-pattern 10.... progress_ind setup enable 3 progress_ind alert enable 8 I have found out that in some of the ios-es both commands are marked as hidden, so don't worry if you don't get them by using the famous '?' after progress_ind command. Hope that helps. Cheers, DanB On 9/22/07, Klaus Darilion <[EMAIL PROTECTED]> wrote: > Dan-Cristian Bogos wrote: > > Hi Guys, > > > > I also have done it and it worked like a charm. > > I could even queue streams (more steps), all being played inband, > > therefore no charge from PSTN side. > > It all depends on your carrier whether he (or his partners) will open > > one way channel on PSTN side or generate his own stuff when receiving > > Progress indicator on ISDN (#C7) side - even Cisco ASes have this > > option built in as a dial-peer command. > > > > Cheers, > > DanB > > > > > > On 9/22/07, Klaus Darilion <[EMAIL PROTECTED]> wrote: > >> Mark Anthony C. Delfin wrote: > >>> Hi all, > >>> > >>> Is it possible to alter ring back tone on cisco gateways. For example I > >>> want change my ringback to an audio file. Some Mobile providers do this > >>> already. > >> > >> I once tried that too on a 5300 - streaming early media into the PSTN. > >> From reading the docs I came to the conclusion that it should be > >> possible but I could never test it as usually PRI are not allowed to > >> stream early media to the PSTN. > > Hi Dan! Could you be a be more detailed how this is done in the gateway? > I once did it with a tcl script and it was very complicated. > > regards > klaus > _______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users