Based on the xlog's in your config, you should be able to see which
avp_db_load() is being called with no value. Once you know which
variable is blank, you can then try to determine why it's not being
populated.
Your config appears to be taken from one of the automatically generated
ones from sipwise. You should double check the documentation and make
sure that you have followed all of the instructions. If their
instructions are not complete, you should let them know.
Hope this helps,
Norm
Live Great wrote:
> Hi, in openser.cfg file, there is a route[4] section where also
> involve avp_db_load():
>
> ########################################################################
> # Request route 'usr-preferences-callee'
> ########################################################################
> route[4]
> {
> xlog("L_INFO", "Load callee preferences for uuid
> '$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
> # load callee avps
> avp_db_load("$avp(s:callee_uuid)", "*");
> if(is_avp_set("$avp(s:cfu)/s"))
> {
>
> xlog("L_INFO", "Call-forward-unconditional to
> '$avp(s:cfu)' found - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
> route(8);
> avp_delete("$avp(s:caller_uuid)/g");
> avp_copy("$avp(s:callee_uuid)", "$avp(s:caller_uuid)/d");
> avp_pushto("$ru", "$avp(s:cfu)");
>
> route(3);
> route(14);
> exit;
> }
> if(is_avp_set("$avp(s:ringtimeout)/n"))
> {
>
> xlog("L_INFO", "Setting ring timeout to
> $avp(s:ringtimeout) secs - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
> avp_copy("$avp(s:ringtimeout)",
> "$avp(s:callee_fr_inv_timer)/d");
> }
>
> }
>
>
> ----- Original Message ----
> From: Live Great <[EMAIL PROTECTED]>
> To: Norman Brandinger <[EMAIL PROTECTED]>
> Cc: users@openser.org
> Sent: Monday, September 24, 2007 2:02:19 PM
> Subject: Re: [OpenSER-Users] how to register xlite user for testing
> with openser
>
> Hi, here is the configuration specific to avp_db_load in the
> openser.cfg file:
>
> route[3]
> {
> route(1);
> xlog("L_INFO", "Load caller preferences for uuid
> '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
> # load caller avps
> avp_db_load("$avp(s:caller_uuid)", "*");
> avp_copy("$avp(s:cli)", "$avp(s:caller_cli)/d");
> if(is_avp_set("$avp(s:clir)/n") && avp_check("$avp(s:clir)",
> "eq/i:1"))
> {
> # mark for anonymization
> setflag(28);
> }
>
> }
>
> I never change this configuration.
>
> Thanks
> SW
>
> ----- Original Message ----
> From: Norman Brandinger <[EMAIL PROTECTED]>
> To: Live Great <[EMAIL PROTECTED]>
> Sent: Monday, September 24, 2007 12:59:19 PM
> Subject: Re: [OpenSER-Users] how to register xlite user for testing
> with openser
>
> Are you issuing an avp_db_load() call with no value ? That might
> explain the error message. Probably be a good idea to post the config
> you are using.
>
> Regards,
> Norm
>
>
>
> Live Great wrote:
> > Hi, thanks very much for the suggestion.
> > I have added the required columns in the acc and missed_calls table.
> > Now when I tried to call an off-line number, it still show one error:
> >
> > ERROR:avpops:load_avps: no value for first param
> >
> > The errors related to the acc and missed_calls tables are already gone.
> > In xlite panel, the error message says "Call failed: Proxy
> > Authentication Required.".
> > I am not sure what happened if I call a on-line phone number.
> >
> > Thanks
> > SW
> >
> > ----- Original Message ----
> > From: Norman Brandinger <[EMAIL PROTECTED]>
> > To: Live Great <[EMAIL PROTECTED]>
> > Cc: users@openser.org
> > Sent: Sunday, September 23, 2007 10:50:38 PM
> > Subject: Re: [OpenSER-Users] how to register xlite user for testing
> > with openser
> >
> > Hi,
> >
> > The subscriber "username" IS the "phone number". The phone number field
> > in the subscriber table is only used by SERWEB. I believe the
> > "username" column name is better than "phone" because in SIP, the idea
> > of a telephone number is being blurred.
> >
> > Please refer to the online doc at:
> > http://openser.org/dokuwiki/doku.php/database:1.2.x#subscriber
> >
> > There is alot of material at the openser.org web site that can help you.
> >
> > The mediaproxy errors are a result of your script calling a mediaproxy
> > function but mediaproxy isn't running. This can be downloaded thanks to
> > AG Projects from http://ag-projects.com/MediaProxy.html
> >
> > The src_leg / dst_leg errors are a result of you trying to save
> > additional (accounting) fields into the "acc" and/or "missed_calls"
> > table. This is generally used for multi-leg call accounting (for
> > example, in a call forwarding situation where the initial callee changes
> > to the caller .. of the forwarded call). You will have to manually add
> > these column to the acc and missed_calls tables (varchar(64)) should be
> > fine for most purposes.
> >
> > Regards,
> > Norm
> >
> > Live Great wrote:
> > > Now is getting other errors.
> > > When I tried to dial a number, eg. 123 - the default Admin account, I
> > > got the following errors shown in /var/log/messages:
> > >
> > > ERROR:avpops:load_avps: no value for first param
> > > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy
> > > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy
> > > submit_query: Unknown column 'src_leg' in 'field list'
> > > db_insert: Error while submitting query
> > > ERROR:acc:acc_db_request: Error while inserting to database
> > >
> > >
> > > ----- Original Message ----
> > > From: Norman Brandinger <[EMAIL PROTECTED]>
> > > To: Live Great <[EMAIL PROTECTED]>
> > > Sent: Saturday, September 22, 2007 11:53:53 PM
> > > Subject: Re: [OpenSER-Users] how to register xlite user for testing
> > > with openser
> > >
> > > I believe the openser_mysql.sh script is being phased out. It has
> been
> > > replaced by openserdbctl (thanks to a big effort from Henning
> !!!). If
> > > your installation doesn't have /usr/local/sbin/openserdbctl I strongly
> > > suggest that you upgrade to a version of OpenSER that contains it.
> > >
> > > The rest of your settings appear to to be ok.
> > >
> > > Regards,
> > > Norm
> > >
> > > Live Great wrote:
> > > >
> > > >
> > > > ----- Original Message ----
> > > > From: Norman Brandinger <[EMAIL PROTECTED]>
> > > > To: Live Great <[EMAIL PROTECTED]>
> > > > Cc: users@openser.org
> > > > Sent: Saturday, September 22, 2007 9:43:54 PM
> > > > Subject: Re: [OpenSER-Users] how to register xlite user for testing
> > > > with openser
> > > >
> > > > Is is possible that you turned on database support but forgot to
> make
> > > > the database tables ? The error message you posted is pretty
> > explicit:
> > > > "Unknown column"....
> > > > I used openser_mysql.sh create to populate openser database and its
> > > > tables.
> > > > Here is all its tables:
> > > > mysql> show tables;
> > > > +-----------------------+
> > > > | Tables_in_openser |
> > > > +-----------------------+
> > > > | acc |
> > > > | active_sessions |
> > > > | active_watchers |
> > > > | address |
> > > > | admin_privileges |
> > > > | aliases |
> > > > | cpl |
> > > > | dbaliases |
> > > > | domain |
> > > > | domainpolicy |
> > > > | grp |
> > > > | gw |
> > > > | gw_grp |
> > > > | imc_members |
> > > > | imc_rooms |
> > > > | lcr |
> > > > | location |
> > > > | missed_calls |
> > > > | pdt |
> > > > | pending |
> > > > | phonebook |
> > > > | presentity |
> > > > | pua |
> > > > | re_grp |
> > > > | server_monitoring |
> > > > | server_monitoring_agg |
> > > > | silo |
> > > > | sip_trace |
> > > > | speed_dial |
> > > > | subscriber |
> > > > | trusted |
> > > > | uri |
> > > > | usr_preferences |
> > > > | usr_preferences_types |
> > > > | version |
> > > > | watchers |
> > > > | xcap_xml |
> > > > +-----------------------+
> > > > 37 rows in set (0.00 sec)
> > > >
> > > >
> > > >
> > > > The warnings about missing permissions files can be ignored
> > (unless you
> > > > really do need them), but in your case, it seems that you are not at
> > > > that point yet..
> > > >
> > > > Take a look at openserdbctl as it automates the process of
> > creating the
> > > > database and tables needed by the various openser
> > modules. openserctlrc
> > > > (usually located in /usr/local/etc/openser) contains a number of
> > startup
> > > > settings, some of which are database related.
> > > >
> > > > The standard request you will receive from people trying to
> assist you
> > > > is to post your config file (or at least the interesting sections of
> > > it).
> > > >
> > > > The part of the content of openser..cfg is:
> > > > listen = udp:127.0.0.1:5060
> > > > listen = udp:125.255.1.2:5060
> > > > mpath = "/usr/local/lib/openser/modules"
> > > > children = 8
> > > > debug = 3
> > > > fork = yes
> > > > group = "openser"
> > > > user = "openser"
> > > > disable_tcp = no
> > > > log_facility = LOG_DAEMON
> > > > #log_facility = LOG_LOCAL7
> > > > log_stderror = no
> > > > tcp_children = 4
> > > > mhomed = no
> > > > server_signature = yes
> > > > sock_group = "openser"
> > > > sock_mode = 0600
> > > > sock_user = "openser"
> > > > unix_sock = "/tmp/openser.sock"
> > > > unix_sock_children = 1
> > > > reply_to_via = no
> > > > sip_warning = no
> > > > check_via = no
> > > > dns = no
> > > > rev_dns = no
> > > > disable_core_dump = no
> > > > dns_try_ipv6 = yes
> > > > dns_use_search_list = yes
> > > >
> > > > openserctlrc:
> > > > ## your SIP domain
> > > > SIP_DOMAIN=ip6.com.au
> > > >
> > > > ## database type: MYSQL or PGSQL, by defaulte none is loaded
> > > > DBENGINE=MYSQL
> > > >
> > > > ## database host
> > > > DBHOST=localhost
> > > >
> > > > ## database name
> > > > DBNAME=openser
> > > >
> > > > ## database read/write user
> > > > DBRWUSER=openser
> > > > # DBRWUSER=admin
> > > >
> > > > ## database read only user
> > > > DBROUSER=openserro
> > > >
> > > > ## password for database read only user
> > > > DBROPW=openserro
> > > >
> > > > ## database super user
> > > > DBROOTUSER="root"
> > > >
> > > > HAS_SERWEB="yes"
> > > >
> > > > I am not too sure the correct way to define openserctlrc file..
> > > > Your comment is much appreciated.
> > > >
> > > > Thanks
> > > > SW
> > > >
> > > > Norm
> > > >
> > > > Live Great wrote:
> > > > > Hi,
> > > > >
> > > > > After changed the port 5077 to 5060 in openser.cfg file, restarted
> > > > > openser.
> > > > > When xlite initiate a registartion request, openser system log
> file
> > > > > shown a different message:
> > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default allow
> > > > > file (/usr/local/etc/openser/permissions.allow) not found => empty
> > > > > rule set
> > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: WARNING:
> > File not
> > > > > found: /usr/local/etc/openser/permissions.deny
> > > > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default
> > deny file
> > > > > (/usr/local/etc/openser/permissions.deny) not found => empty
> > rule set
> > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: get_ha1():
> > Error
> > > > > while querying database
> > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: submit_query:
> > > > > Unknown column 'uuid' in 'field list'
> > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: db_query:
> Error
> > > > > while submitting query
> > > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: get_ha1():
> > Error
> > > > > while querying database
> > > > >
> > > > > In Xlite, it said Registration error 500, server internal error.
> > > > > What is possibility wrong in my openser server configuration?
> > > > >
> > > > >
> > > > > Thanks
> > > > > SW
> > > > >
> > > > > ----- Original Message ----
> > > > > From: Live Great <[EMAIL PROTECTED]>
> > > > > To: users@openser.org
> > > > > Sent: Saturday, September 22, 2007 2:03:07 PM
> > > > > Subject: [OpenSER-Users] how to register xlite user for
> testing with
> > > > > openser
> > > > >
> > > > > Hi,
> > > > >
> > > > > I used the following command to add xlite user, but xlite
> failed to
> > > > > register the user in openser server.
> > > > > # openserctl add 1234 1234 [EMAIL PROTECTED]
> > > > >
> > > > > where 1234 is user id and password.
> > > > >
> > > > > If this is not the correct way to add user for testing from
> xlite to
> > > > > openser, what are the alternative way I can use?
> > > > >
> > > > >
> > > > > Thanks
> > > > > SW
> > > > >
> > > > >
> > >
> ------------------------------------------------------------------------
> > > > >
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users@openser.org
> > > > > http://openser.org/cgi-bin/mailman/listinfo/users
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
>
>
_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
