> ----- Original Message ----- > > From: "Gianluca Cecchi" <gianluca.cec...@gmail.com> > > To: "Liron Aravot" <lara...@redhat.com> > > Cc: "users" <users@ovirt.org>, "Vered Volansky" <ve...@redhat.com> > > Sent: Thursday, February 28, 2013 7:07:55 PM > > Subject: Re: [Users] clone vm from snapshot problem in 3.2 > > > > On Wed, Feb 27, 2013 at 1:21 PM, Liron Aravot wrote: > > > > >> Hi Gianluca, > > >> I've built 3.2 and had success in reproducing your issue, I've > > >> also > > >> tested the fix and after it the clone window shows fine - so > > >> this > > >> should solve your issue (http://gerrit.ovirt.org/#/c/11254/). > > >> > > >> Thanks, Liron. > > > > Hello, > > so I rebuilt with the patch. > > I built as in this thread: > > http://lists.ovirt.org/pipermail/users/2013-February/012702.html > > > > directly on engine server and with engine stopped: > > > > sudo rpm -Uvh --force $(ls -1|grep -v all) > > > > with > > $ ls -1|grep -v all > > ovirt-engine-3.2.0-4.fc18.noarch.rpm > > ovirt-engine-backend-3.2.0-4.fc18.noarch.rpm > > ovirt-engine-config-3.2.0-4.fc18.noarch.rpm > > ovirt-engine-dbscripts-3.2.0-4.fc18.noarch.rpm > > ovirt-engine-genericapi-3.2.0-4.fc18.noarch.rpm > > ovirt-engine-notification-service-3.2.0-4.fc18.noarch.rpm > > ovirt-engine-restapi-3.2.0-4.fc18.noarch.rpm > > ovirt-engine-setup-3.2.0-4.fc18.noarch.rpm > > ovirt-engine-tools-common-3.2.0-4.fc18.noarch.rpm > > ovirt-engine-userportal-3.2.0-4.fc18.noarch.rpm > > ovirt-engine-webadmin-portal-3.2.0-4.fc18.noarch.rpm > > > > and then reboot the engine > > > > Results: > > > > OK, for the snapshot details pane. It seem the patch fixes this > > too. > > Until now I was never able to see snapshot details, > > Instead now I can see disk and nic details. See: > > https://docs.google.com/file/d/0BwoPbcrMv8mvQmlCZTZBYjBadmc/edit?usp=sharing > > > > > > OK, if I clone a VM from a snapshot of a running VM (CentOS 5.6) > > I start the clone and no problem at all. > > > > well done! > > > > > > Corner cases and problems > > > > 1) > > OK, if I clone a powered on VM from a snapshot with two disks and > > here > > you can find clone in action with webadmin gui and iotop on node > > that > > shows they are cloning in parallel.. well! > > https://docs.google.com/file/d/0BwoPbcrMv8mvZ3lzY0l1MDc5OVE/edit?usp=sharing > > > > The VM is a slackware 14 32bit with virtio disk that I obtained > > from > > a > > virt-v2v from CentOS 6.3+Qemu/KVM > > The problem is that the cloned VM recognizes the disks in reversed > > order > > > > See these images where sl1432 is master slcone is the clone > > > > disk layout in details pane seems equal with boot disk the one that > > appears as the second, but the master boots ok, the slave no. > > Disks are swapped > > > > Master VM disk details: > > https://docs.google.com/file/d/0BwoPbcrMv8mvSWNVNFI4bHg4Umc/edit?usp=sharing > > > > Clone VM disks details: > > https://docs.google.com/file/d/0BwoPbcrMv8mvM1N0bVcyNlFPS1U/edit?usp=sharing > > > > Page with the two consoles where you can see that vda of master > > becomes vdb of clone and vice-versa: > > https://docs.google.com/file/d/0BwoPbcrMv8mveFpESEs5V1dUTFE/edit?usp=sharing > > > > Can I swap again in some way? In VMware for example you can see and > > edit SCSI IDs of disks...
Can you please provide the engine logs where the boot success/failure of master and clone can be seen? > > 2) > > KO, if I clone a windows 7 VM from a snapshot (time 17:09) I get > > this > > on gui > > https://docs.google.com/file/d/0BwoPbcrMv8mvaW9OVW84WVI1dkU/edit?usp=sharing > > > > You can find the engine.log from server restart (at 17:06) here: > > https://docs.google.com/file/d/0BwoPbcrMv8mvTDQzRTFfbFgxX0E/edit?usp=sharing > > > > Are there any restrictions? > > The VM was powered off when taking the snapshot and making the > > clone. > > Hi Gianluca, > > Regarding the second item you mentioned - failure of the clone vm > from snapshot, > the engine log indicates that the following error occurred "Volume > Group not big enough" - suggesting you might check if you have > enough free space. > > > Gianluca > > _______________________________________________ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
