On 08/01/2013 01:43 AM, Richie@HIP wrote:
BTW - I installed oVirtEngine at a client's office using a VirtualBox
VM. They are a large imaging center and have an Active Directory and
DNS in place. I Stumbled upon ALL the same problems when using the
default engine setup parameters (it hung upon restarting the HTTPd service).
Just to add to your knowledge, I began doing the oVirtEngine
implementation using Parallels Desktop as well as VirtualBox in MY
MacBookPro; both experience the same problems.
can you please open a bug on installer to clearly state this name will
not work, etc?
Richie
*
José E ("Richie") Piovanetti, MD, MS*
M: 787-615-4884 | richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>
On Jul 31, 2013, at 6:29 PM, "Richie@HIP"
<richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>> wrote:
Arr.…
On June 4 2013 I sent the following message trying to overcome the
FQDN issue:
hi oVirt Community.
This will be my first posting for help to the oVirt community, so
please bear with me I'f I'm not to the etiquette standards you might
have already.
I'm trying to test oVirt as a FOSS Virtualization solution for small-
to medium-sized healthcare organizations implementing various health
information technology solutions (HIT) that the new health care
reform is requiring. As a Clinical informatist, I'm very concerned
about health care costs, hence I'm pushing for open source to take a
wider stance in U.S. health care to reduce costs where possible and
divert moneys to patient care. Now enough with my altruistic
desires, and let go into the deep.
I'm trying to create "virtual machines" (using VirtualBox, Parallels
and/or VMWare Workstation); mainly one for "oVirt Engine"; ind later
a the second one for "oVirt Nodes". This way, these VM's files can
be copier to any hardware and underlying OS, so at least the "Virt
Engine" is easily installed and brought-up to facilitate managing
oVirt Nodes. I considered creating ".iso" images of each component
(Engine and Nodes) but I'm afraid this will hit the wall for linux
novices when installing the ".iso" images in different hardware
platforms (with different processors, number of cores, RAM, chipsets,
etc.)
I've begun with creating a VM for oVirt Engine under Parallels
(albeit I began with VirtualBox, but drivers "client additions"
aren't compatible with Fedora 18 - so I'll migrate this Parallels VM
to VB once it is operational) Fedora 18 installed without a single
problem. I then installed all "oVirt Engine" requirements by
performing the instructions published in
http://www.ovirt.org/Download - that is:
First:
sudo yum localinstall
http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm
Second:
sudo yum install -y ovirt-engine
Third: …I get stuck…!!!
When I am performing the third step, I hit the fan. Each time I
perform the third step shown in the aforementioned web page
(i.e. sudo engine-setup), the "Welcome to oVirt Engine setup utility"
appears and begins to run until I reach the point where I need to
define a "Fully Qualified Domain Name."
NOTE - A video of how to install oVirt in a single machine, entitled
"Installing oVirt on a single machine" (at:
http://www.ovirt.org/Documentation) shows the process (with some
exemptions because it was recorded while oVirt v3.x was in beta), but
I don't get what the video shows…!!!
This is what I do and before getting stuck in the "FQDN thing" (no
pun intended…!!!). As third-step, I enter:
sudo engine-setup
I follow the prompts that appear after the "Welcome to oVirt Engine
setup utility" is shown in the terminal window until I get to the prompt:
Host fully qualified domain name. Note: this name should be fully
resolvable [localhost.localdomain] :
If I press "Enter", I get…:
The IP (127.0.0.1) which was resolved from the FQDN
localhost.localdomain is not configured on any non loopback interface
on this host
I figured that in order to define a FQDNm I had to expose my "oVirt
Engine" VN to the Internet. Since I'm doing all from home (where I'm
limited to a "Dynamic IP", albeit, which hardly-ever changes) I went
to DynDns.org <http://DynDns.org> and created an entry so my "FQDN
Text-URL" would resolve to the IP where I'm at. I also modified my
Domain's DNS and entered a "DNS Alias" named "dcmanagement", defining
this "DNS alias" to resolve into my IP by going to DynDNS.org
<http://DynDNS.org> to get my "Public IP". Hence, the alias
"dcmanagement1" resolves by going to
"healthcareinfopartners.dyndns.org
<http://healthcareinfopartners.dyndns.org>" and gets my Public IP.
NOTE - To test this setup, I do "ping" to either
"healthcareinfopartners.dyndns.org
<http://healthcareinfopartners.dyndns.org>" or
"dcmanagement1.healthcareinfopartners.dyndns.org
<http://dcmanagement1.healthcareinfopartners.dyndns.org>" and I get
my Dynamic Public IP back. Once the "Text URL" issue was returning
my IP (as FQDN expect) I repeated the:
sudo engine-setup
Upon reaching:
Host fully qualified domain name. Note: this name should be fully
resolvable [localhost.localdomain] :
I entered "dcmanagement1.healthcareinfopartners.com
<http://dcmanagement1.healthcareinfopartners.com>" and got my Public
IP back with the following message:
The IP (70.45.xxx.xx) which was resolved from the FQDN
dcmanagement1.healthcareinfopartners.com
<http://dcmanagement1.healthcareinfopartners.com> is not configured
on any non loopback interface on this host
Now, here's the question. What does anyone suggest I do to overcome
the FQDN setting and continue the installation process…?
José E ("Richie") Piovanetti, MD, MS
M: 787-615-4884 | richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>
Looking at your evaluation of my ERROR_LOG, and HOSTNAME (your first
and second comments) you reassured my suspicion; to go to "HOSTNAME"
and change "localhost-localdomain" to "localhost.localdomain".
When I go to your "third" comment is where all hell breaks loose. You
say "/to make ovirt-engine work, you must have resolvable host via dns
and resolved to non loopback address, so localhost will not work for
you/". That line appears to take me back to where I started a month
and half ago (see copy of my original pos for help); "localhost" and
"localdomain" seem to be biting me in the ass.
I was told that by adding an entry to the HOST file i'd overcome the
need for a DNS. Not exactly the same as what you suggest and/or mean…?
Since I'm doing this work at home I have a Dynamic IP. I opened an
account on DynDNS.or so I could resolve DNSs to my "Dynamic IP"; which
changes every time the power goes out and back (i.e. about once a
month in Puerto Rico where I'm at, and were used to that as trees and
tropical foliage can't be prevented from causing blackouts by tripping
on power lines).
If I PING (from the "Terminal") healthcareinfopartners.dyndns.org
<http://healthcareinfopartners.dyndns.org/> I get my "Public IP at The
Time" (i.e. my "Assigned Dynamic IP").
In my Godaddy.com <http://godaddy.com/> DNS setting I have a CName
entry for:
* Host: dcmanagement1
* Points To: healthcareinfopartners.dyndns.org
<http://healthcareinfopartners.dyndns.org/>
<Screen Shot 2013-07-31 at 6.19.54 PM.png>
What should I use as FQDN then (which is resolved by GoDaddy's DNS):
* healthcareinfopartners.dyndns.org
<http://healthcareinfopartners.dyndns.org/>
* dcmanagement1.healthcareinfopartners.dyndns.org
<http://dcmanagement1.healthcareinfopartners.dyndns.org/>
* something else…?
The problem I see with this is that the "oVirtEngine" VM will not have
a valid Internet IP since it sits behind a router that is doing NAT.
I could set a rule (ex. por forwarding, port triggering or a static
route) in my router that states that if port X is being accessed from
"the outside" (i.e. Internet) to route to my "oVirtEngine VM IP";
which is getting it's own IP from the router's DHCP.
What do you think now that you have a little more information about my
setup…?
*José E ("Richie") Piovanetti, MD, MS*
M: 787-615-4884 | richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>
On Jul 31, 2013, at 3:32 PM, Alon Bar-Lev <alo...@redhat.com
<mailto:alo...@redhat.com>> wrote:
----- Original Message -----
From: "Richie@HIP" <richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>>
To: "Alon Bar-Lev" <alo...@redhat.com <mailto:alo...@redhat.com>>
Cc: "Itamar Heim" <ih...@redhat.com <mailto:ih...@redhat.com>>,
users@ovirt.org <mailto:users@ovirt.org>
Sent: Wednesday, July 31, 2013 9:00:11 PM
Subject: Re: [Users] Problem Creating "oVirt Engine"
I'm having difficulties copying files between the virtual machine
and the
host (Mac OS X) so here are the contents of the LOG files you
requested, and
them some others; just in case:
ERROR_LOG
[Wed Jul 24 15:43:22.461132 2013] [core:notice] [pid 1573] SELinux
policy
enabled; httpd running as context system_u:system_r:httpd_t:s0
[Wed Jul 24 15:43:22.466439 2013] [suexec:notice] [pid 1573]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Wed Jul 24 15:43:22.470121 2013] [unique_id:alert] [pid 1573] (EAI
3)Temporary failure in name resolution: AH01564: unable to find IPv4
address
of "localhost-localdomain"
AH00016: Configuration Failed
[Thu Jul 25 18:14:34.690954 2013] [core:notice] [pid 1767] SELinux
policy
enabled; httpd running as context system_u:system_r:httpd_t:s0
[Thu Jul 25 18:14:34.740559 2013] [suexec:notice] [pid 1767]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jul 25 18:14:34.754827 2013] [unique_id:alert] [pid 1767] (EAI
2)Name or
service not known: AH01564: unable to find IPv4 address of
"localhost-localdomain"
AH00016: Configuration Failed
[Thu Jul 25 18:41:37.883704 2013] [core:notice] [pid 1669] SELinux
policy
enabled; httpd running as context system_u:system_r:httpd_t:s0
[Thu Jul 25 18:41:38.007318 2013] [suexec:notice] [pid 1669]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jul 25 18:41:38.235952 2013] [unique_id:alert] [pid 1669] (EAI
2)Name or
service not known: AH01564: unable to find IPv4 address of
"localhost-localdomain"
AH00016: Configuration Failed
[Thu Jul 25 22:32:24.662852 2013] [core:notice] [pid 1776] SELinux
policy
enabled; httpd running as context system_u:system_r:httpd_t:s0
[Thu Jul 25 22:32:24.667030 2013] [suexec:notice] [pid 1776]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jul 25 22:32:24.752059 2013] [unique_id:alert] [pid 1776] (EAI
2)Name or
service not known: AH01564: unable to find IPv4 address of
"localhost-localdomain"
AH00016: Configuration Failed
[Thu Jul 25 22:43:58.686998 2013] [core:notice] [pid 9998] SELinux
policy
enabled; httpd running as context system_u:system_r:httpd_t:s0
[Thu Jul 25 22:43:58.688804 2013] [suexec:notice] [pid 9998]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jul 25 22:43:58.713941 2013] [unique_id:alert] [pid 9998] (EAI
2)Name or
service not known: AH01564: unable to find IPv4 address of
"localhost-localdomain"
AH00016: Configuration Failed
[Wed Jul 31 11:44:35.413032 2013] [core:notice] [pid 1608] SELinux
policy
enabled; httpd running as context system_u:system_r:httpd_t:s0
[Wed Jul 31 11:44:35.594199 2013] [suexec:notice] [pid 1608]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Wed Jul 31 11:44:35.655151 2013] [unique_id:alert] [pid 1608] (EAI
2)Name or
service not known: AH01564: unable to find IPv4 address of
"localhost-localdomain"
AH00016: Configuration Failed
You must fix this... host should be valid name... or at least
localhost.localdomain
ERROR_LOG-20130722
[Wed Jun 05 21:34:14.169441 2013] [core:notice] [pid 9738] SELinux
policy
enabled; httpd running as context system_u:system_r:httpd_t:s0
[Wed Jun 05 21:34:14.226321 2013] [suexec:notice] [pid 9738]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Wed Jun 05 21:34:14.266895 2013] [unique_id:alert] [pid 9738] (EAI
2)Name or
service not known: AH01564: unable to find IPv4 address of
"localhost-localdomain"
AH00016: Configuration Failed
[Wed Jun 05 21:46:05.696805 2013] [core:notice] [pid 10003] SELinux
policy
enabled; httpd running as context
unconfined_u:system_r:unconfined_t:s0-s0:c0.c1023
[Wed Jun 05 21:46:05.703114 2013] [suexec:notice] [pid 10003]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Wed Jun 05 21:46:05.766539 2013] [unique_id:alert] [pid 10003] (EAI
2)Name
or service not known: AH01564: unable to find IPv4 address of
"localhost-localdomain"
AH00016: Configuration Failed
[Wed Jun 05 22:41:22.385838 2013] [core:notice] [pid 1228] SELinux
policy
enabled; httpd running as context system_u:system_r:httpd_t:s0
[Wed Jun 05 22:41:22.961322 2013] [suexec:notice] [pid 1228]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Wed Jun 05 22:41:23.009235 2013] [unique_id:alert] [pid 1228] (EAI
2)Name or
service not known: AH01564: unable to find IPv4 address of
"localhost-localdomain"
AH00016: Configuration Failed
[Fri Jul 19 17:51:20.671533 2013] [core:notice] [pid 1133] SELinux
policy
enabled; httpd running as context system_u:system_r:httpd_t:s0
[Fri Jul 19 17:51:21.151132 2013] [suexec:notice] [pid 1133]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Fri Jul 19 17:51:21.155341 2013] [unique_id:alert] [pid 1133] (EAI
3)Temporary failure in name resolution: AH01564: unable to find IPv4
address
of "localhost-localdomain"
AH00016: Configuration Failed
[Mon Jul 22 10:53:42.080793 2013] [core:notice] [pid 1293] SELinux
policy
enabled; httpd running as context system_u:system_r:httpd_t:s0
[Mon Jul 22 10:53:42.143691 2013] [suexec:notice] [pid 1293]
AH01232: suEXEC
mechanism enabled (wrapper: /usr/sbin/suexec)
[Mon Jul 22 10:53:42.487376 2013] [unique_id:alert] [pid 1293] (EAI
3)Temporary failure in name resolution: AH01564: unable to find IPv4
address
of "localhost-localdomain"
AH00016: Configuration Failed
ACCESS_LOG
<empty>
SSL_ACCESS_LOG
<empty>
SSL_ERROR_LOG
<empty>
SSL_REQUESTS_LOG
<empty>
HOSTS
# This is a sample HOSTS file prepared by Richie Piovanetti to install
oVirt's "oVirtEngine"
# This file contains the mappings of IP addresses to host names.
# Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
corresponding host name.
# The IP address and the host name should be separated by at least
one space.
# Additionally, comments (such as these) may be inserted on
individual lines
# or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com <http://rhino.acme.com/> # source server
# 38.25.63.10 x.acme.com <http://x.acme.com/> # x client host
127.0.0.1localhost.localdomain localhost
::1localhost6.localdomain6 localhost6
10.211.55.7ovirt.localdomain.local localhost
# The line above begins with the IP of the local machine (host) where
oVirtEngine resides
HOSTNAME
localhost-localdomain
Should be localhost or localhost.localdomain, but not the above.
Also, to make ovirt-engine work, you must have resolvable host via
dns and resolved to non loopback address, so localhost will not work
for you.
José E ("Richie") Piovanetti, MD, MS
M: 787-615-4884 | richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>
On Jul 30, 2013, at 12:42 PM, Alon Bar-Lev <alo...@redhat.com
<mailto:alo...@redhat.com>> wrote:
----- Original Message -----
From: "Richie@HIP" <richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>>
To: "Alon Bar-Lev" <alo...@redhat.com <mailto:alo...@redhat.com>>
Cc: "Itamar Heim" <ih...@redhat.com <mailto:ih...@redhat.com>>,
users@ovirt.org <mailto:users@ovirt.org>
Sent: Tuesday, July 30, 2013 6:42:51 PM
Subject: Re: [Users] Problem Creating "oVirt Engine"
Let me star by Saying, I;m using Fedora 18 Desktop; whack I've removed
most
of the unnecessary stuff (games, libreOffice, mail server, and other
"utilities") to strip it down. Then I run YUM to "-update"
whatever is
left
in Fedora 18 Desktop.
When setting up the oVirt Engine, if I accept the recommendations, the
"engine-setup" process hangs "try to restart the HTTPd"; gives and
[ERROR}
and aborts the rest of the process. I've included terminal dumps
and logs
(i.e. "as attachments") in prior email everyone you to see…!!! If
I DO
NOT
accept the recommendations related to the HTTPd, then the setup
process
RUNS
AS EXPECTED and gives me port 8700 for the main page, and 8701 for all
oVirtEngine "portals". I've looked at the engine-etup log and if
aborts
when the python script is trying to restart HHTPd. Look at the
following:
2013_07_25_10_55_PM_TerminalOutput - Terminal output dump IF I
ACCEPT the
defaults
engine-setup_2013_07_25_22_35_14 - engine-setup "log" IF I ACCEPT the
defaults
I would like to know why httpd is not started at your machine.
Can you please send /var/log/httpd/error_log,
/var/log/httpd/ssl_error_log
2013_07_25_11_30_PM_TerminalOutput - Terminal output dump if I DO NOT
accept
the defaults
engine-setup_2013_07_25_23_27_15 - engine-setup "log" if I DO NOT
accept
the
defaults
I've never reached a point where I've been asked to "accept of
reject a
"Certificate"; I've just been able to open the "oVirt Engine Welcome
Screen"
(through port 8700 - ex. at http://ovirt.localhost.local:8700
<http://ovirt.localhost.local:8700/>")
I've had my concerns as to the following:
What about removing all HTTP (apache, tomcat, etc.) fro fedora, hence
stripping fedora even more, prior to running "engine-setup".
There must be an error trapping failure to restart HTTPd in
"engine-setup"
that needs to be attended.
…
Please see attachments
Best
José E ("Richie") Piovanetti, MD, MS
M: 787-615-4884 | richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>
On Jul 29, 2013, at 7:29 AM, Alon Bar-Lev <alo...@redhat.com
<mailto:alo...@redhat.com>> wrote:
----- Original Message -----
From: "Richie@HIP" <richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>>
To: "Alon Bar-Lev" <alo...@redhat.com <mailto:alo...@redhat.com>>
Cc: "Itamar Heim" <ih...@redhat.com <mailto:ih...@redhat.com>>,
users@ovirt.org <mailto:users@ovirt.org>
Sent: Friday, July 26, 2013 6:45:28 AM
Subject: Re: [Users] Problem Creating "oVirt Engine"
Herein the terminal output after removing oVirtEngine and
reinstalling;
BU
this time NOT overriding the https configuration.
Why not follow the recommendation?
Again, I was able to open the oVirt Engine "Welcome to Open
Virtualization
Manager" screen in Firefox using "ovirt.localdomain.local:8700"
as URL,
but
can't enter any of the portals (requiring access to port 8701)
What do you get? what error in browser? you should accept the
certificate
before you are permitted by the browser to access this site.
José E ("Richie") Piovanetti, MD, MS
M: 787-615-4884 | richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>
On Jul 25, 2013, at 11:22 PM, "Richie@HIP"
<richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>> wrote:
Did what you said; removed existing installation and reinstalled
oVirtEngine. Below is the output in the terminal:
I DID NOT change the defaults of the installation defaults
related to
"overriding current https configuration", and as weeks before, the
installation hangs with an error when restarting the "httpd
service".
I
include the terminal output and engine-setup log file for you
to see.
I'll redo the removal and installation, this time process but
next time
"NOT overriding https configuration". Wait for a follow up
email with
these results.
<engine-setup_2013_07_25_22_35_14.log><2013_07_25_10_55_PM_TerminalOutput.txt>
José E ("Richie") Piovanetti, MD, MS
M: 787-615-4884 | richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>
On Jul 24, 2013, at 4:18 PM, Alon Bar-Lev <alo...@redhat.com
<mailto:alo...@redhat.com>> wrote:
----- Original Message -----
From: "Richie@HIP"
<richiepiovane...@healthcareinfopartners.com
<mailto:richiepiovane...@healthcareinfopartners.com>>
To: "Alon Bar-Lev" <alo...@redhat.com <mailto:alo...@redhat.com>>
Cc: "Itamar Heim" <ih...@redhat.com
<mailto:ih...@redhat.com>>, users@ovirt.org
<mailto:users@ovirt.org>
Sent: Wednesday, July 24, 2013 11:00:04 PM
Subject: Re: [Users] Problem Creating "oVirt Engine"
Herein a collection of some of the logs in the path specified.
Regarding
the
"engine.log" I'm including the one with the oldest date in the
filename.
Can you please remove installation using:
# engine-cleanup
Then reinstall:
# engine-setup
Please select integration with apache, and configure SSL.
After doing so, try to login using http://localhost/webadmin,
if not
working please send the engine.log.
Thanks!
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users