Hi Simon, Thanks, sorry for the grievance you had to suffer but I'm glad all is well now :) Do let us know of any further trouble.
Yours, Lior. On 20/01/14 15:15, Simon Barrett wrote: > I built a new Engine Server on 3.3.2-1.el6, rebuilt my VM's and I no longer > see the issue. All is now working as expected. > > Simon > > -----Original Message----- > From: Simon Barrett > Sent: 08 January 2014 08:50 > To: Lior Vernia; Itamar Heim > Cc: users@ovirt.org > Subject: RE: [Users] Network profile lost after host edit > > To test this further I setup another 3.3.2-1.el6 ovirt-engine. I'm not seeing > the same problem on the new engine. > > I'm going to try and move all configuration/VM's etc from the problem > ovirt-engine install to the new one to see if the problem re-appears. > > I'll let you know how it goes. > > Simon > > > -----Original Message----- > From: Lior Vernia [mailto:lver...@redhat.com] > Sent: 08 January 2014 06:02 > To: Itamar Heim > Cc: Simon Barrett; users@ovirt.org > Subject: Re: [Users] Network profile lost after host edit > > > > On 07/01/14 23:16, Itamar Heim wrote: >> On 01/07/2014 08:59 AM, Lior Vernia wrote: >>> Hi Simon, >>> >>> Thank you so much for tracking this down. I'm currently immersed in >>> oVirt 3.4 feature stuff, but I just wanted to let you know I saw this >>> and am planning to take care of it; I'll take a look in a week or two >>> when things calm down. >>> >>> The bad news are, I suspect there will be no workaround other than >>> upgrading to the next version that will include the fix (likely 3.3.3). >>> >> >> is there an ovirt bug targeted to 3.3.3 tracking this? >> > > I'll open one as soon as I test the issue. Unless Simon would like to pick up > the gauntlet and open one on bugzilla.redhat.com?... > >>> Yours, Lior. >>> >>> On 06/01/14 12:21, Simon Barrett wrote: >>>> I am now able to reproduce the problem where network profile >>>> definitions are lost on VM edit. >>>> >>>> - Create VM >>>> - From the "Network Interfaces" tab, click on "New" and assign the >>>> ovirtmgt profile to nic1 >>>> - Edit VM, from the "nic1" drop down select another profile and >>>> click OK >>>> - Edit the same VM again and nic1 lists as <Empty> >>>> >>>> I upgraded to 3.3.2-1.el6 and still see the problem. >>>> >>>> As ever, any help is very much appreciated. >>>> >>>> Thanks, >>>> >>>> Simon >>>> >>>> >>>> -----Original Message----- >>>> From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On >>>> Behalf Of Simon Barrett >>>> Sent: 12 December 2013 21:53 >>>> To: Lior Vernia >>>> Cc: users@ovirt.org >>>> Subject: Re: [Users] Network profile lost after host edit >>>> >>>> Lior, >>>> >>>> I'm running 3.3.1. >>>> >>>> I think it may be related to how I created the VM's. Another VM >>>> created using the blank template works fine and the network config >>>> displays correctly when I click on edit. >>>> >>>> The problem VM's were created with a different template. I'll dig a >>>> bit further to see if I can narrow it down any further. >>>> >>>> I don't have to click show advanced to exhibit the problem. >>>> >>>> Thanks for the response >>>> >>>> Simon >>>> >>>>> On 12 Dec 2013, at 16:44, "Lior Vernia" <lver...@redhat.com> wrote: >>>>> >>>>> Hi Simon, >>>>> >>>>> I apologize for the delay in my response. I've worked quite a bit >>>>> on that part of the dialog since oVirt 3.3, and while it was quite >>>>> buggy I haven't encountered this exact issue you're describing. It >>>>> does remind me of one bug though; could it be that pressing the >>>>> "Show Advanced Options" is what triggers the strange behavior? >>>>> >>>>> What version of oVirt engine are you running? Both 3.3.1 and 3.3.2 >>>>> should be quite stable as far as this dialog is concerned, so >>>>> upgrading might be a good idea. >>>>> >>>>> As for workarounds, it sounds like a GUI issue so I don't think >>>>> there's anything you can do apart from upgrading the engine. >>>>> >>>>> Yours, Lior. >>>>> >>>>>> On 11/12/13 13:40, Simon Barrett wrote: >>>>>> I have a problem where VM network profiles are lost when editing a >>>>>> host. >>>>>> E.G. >>>>>> >>>>>> >>>>>> >>>>>> * VM is running fine on the correct network. Network >>>>>> Interfaces >>>>>> tab shows "nic1" and "Network Name" shows the correct network profile. >>>>>> >>>>>> * I shutdown the VM then right click and Edit. >>>>>> >>>>>> * The General settings for the node shows "nic1 <Empty>". If I >>>>>> then edit config, something like increasing memory or changing CPU >>>>>> cores then click on OK, the VM configuration is saved without a >>>>>> network profile. >>>>>> >>>>>> * When I boot the VM I cannot connect to it. >>>>>> >>>>>> * I then have to edit the node again configure back in the >>>>>> correct network profile. >>>>>> >>>>>> >>>>>> >>>>>> Does anyone know if this is a known issue? If not, any suggestions >>>>>> as to how I correct this so that the original network profile >>>>>> definition is retained after an edit? >>>>>> >>>>>> >>>>>> >>>>>> Many thanks, >>>>>> >>>>>> >>>>>> >>>>>> Simon >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users@ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>> _______________________________________________ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users