On 08/04/2014 09:06 AM, Punit Dambiwal wrote:
Hi Sahina,
But when i try to add the gluster Hosts from Ovirt....it doesn't
display the FQDN to add the bricks...it display the ip address
only...i will try to use the work around....
When you add the gluster host to oVirt, you should have provided the
FQDN in the host address field. It uses this to display the list of
hosts from which you can add the bricks
Another question is what will be the drawbacks if i use ovirtmgmt and
storage on the same network (i will use 10GB network here with bonding) ??
On Fri, Aug 1, 2014 at 6:14 PM, Sahina Bose <sab...@redhat.com
<mailto:sab...@redhat.com>> wrote:
On 08/01/2014 02:51 PM, Dan Kenigsberg wrote:
On Fri, Aug 01, 2014 at 09:43:07AM +0800, Punit Dambiwal wrote:
Hi All,
Is there any update on this ??
On Thu, Jul 31, 2014 at 9:08 AM, Punit Dambiwal
<hypu...@gmail.com <mailto:hypu...@gmail.com>> wrote:
Hi Antoni,
But all the bricks and gluster in the another
subnet...I am using the
Compute and gluster storage combined on the same host....
Ovirtmgmt :- 43.25.76.0/24 <http://43.25.76.0/24>
Gluster Storage :- 10.10.10.0/24 <http://10.10.10.0/24>
Did you try to follow Sahina's advice?
qemu-to-gluster communication goes on top the IP that you mount.
However, without hacks, inter-gluster communication uses FQDN
of hosts,
which most commonly resolves to the management network.
From the output of your "gluster volume info" , it looks like you
have used IP address (43.25...) to peer probe the hosts? If you
add the host from oVirt, for gluster to be able to use separate
network for glusterd-glusterd communication, you will need to use
FQDN while adding the host, and workaround as mentioned in
http://lists.ovirt.org/pipermail/users/2014-February/020894.html
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users