On 08/06/2014 06:36 AM, Punit Dambiwal wrote:
Hi Sahina,
But Ovirt panel doesn't allow me to add with FQDN...it just display
the ip address of the hosts...
Inline image 1
Hi Punit,
The above happens only when ip address of the host is given in the
Address field of New host dialog box, i.e while adding hosts to ovirt.
As sahina suggested, if you would have provided the FQDN in the address
filed while adding hosts to ovirt, you should have seen FQDN's of the
hosts being displayed in the Host field of 'Add Bricks' Dialog.
In case you would have not provided FQDN of the host in the address
filed while adding hosts, please remove the hosts and add it again by
giving FQDN of the host in the address field in the New Host dialog box.
Hope this helps :-)
Thanks
kasturi.
On Tue, Aug 5, 2014 at 7:48 PM, Sahina Bose <sab...@redhat.com
<mailto:sab...@redhat.com>> wrote:
On 08/04/2014 09:06 AM, Punit Dambiwal wrote:
Hi Sahina,
But when i try to add the gluster Hosts from Ovirt....it doesn't
display the FQDN to add the bricks...it display the ip address
only...i will try to use the work around....
When you add the gluster host to oVirt, you should have provided
the FQDN in the host address field. It uses this to display the
list of hosts from which you can add the bricks
Another question is what will be the drawbacks if i use ovirtmgmt
and storage on the same network (i will use 10GB network here
with bonding) ??
On Fri, Aug 1, 2014 at 6:14 PM, Sahina Bose <sab...@redhat.com
<mailto:sab...@redhat.com>> wrote:
On 08/01/2014 02:51 PM, Dan Kenigsberg wrote:
On Fri, Aug 01, 2014 at 09:43:07AM +0800, Punit Dambiwal
wrote:
Hi All,
Is there any update on this ??
On Thu, Jul 31, 2014 at 9:08 AM, Punit Dambiwal
<hypu...@gmail.com <mailto:hypu...@gmail.com>> wrote:
Hi Antoni,
But all the bricks and gluster in the another
subnet...I am using the
Compute and gluster storage combined on the same
host....
Ovirtmgmt :- 43.25.76.0/24 <http://43.25.76.0/24>
Gluster Storage :- 10.10.10.0/24
<http://10.10.10.0/24>
Did you try to follow Sahina's advice?
qemu-to-gluster communication goes on top the IP that you
mount.
However, without hacks, inter-gluster communication uses
FQDN of hosts,
which most commonly resolves to the management network.
From the output of your "gluster volume info" , it looks like
you have used IP address (43.25...) to peer probe the hosts?
If you add the host from oVirt, for gluster to be able to use
separate network for glusterd-glusterd communication, you
will need to use FQDN while adding the host, and workaround
as mentioned in
http://lists.ovirt.org/pipermail/users/2014-February/020894.html
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
