Hello Florian,
there is no problem to reslove the FQDN
[nolden@oVirtNode01 ~]$ nslookup oVirtEngine.com
Server: 192.168.122.1
Address: 192.168.122.1#53
Name: oVirtEngine.com
Address: 192.168.122.201
The '/etc/hosts' file of each host is configured to resolve the name.
I tried it with stopped firewall,
[nolden@oVirtNode01 ~]$ sudo systemctl stop firewalld
[nolden@oVirtNode01 ~]$ sudo systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled;
vendor preset: enabled)
Active: inactive (dead) since Di 2016-11-08 09:10:46 CET; 3s ago
Process: 724 ExecStart=/usr/sbin/firewalld --nofork --nopid
$FIREWALLD_ARGS (code=exited, status=0/SUCCESS)
Main PID: 724 (code=exited, status=0/SUCCESS)
but i got the same error!
Am 04.11.2016 um 15:50 schrieb Florian Nolden:
Hello Steffen,
can your nodes resolve the FQDN "ovirtengine.com
<http://ovirtengine.com>" to the hosted engine ip ( nslookup
ovirtengine.com <http://ovirtengine.com>) ?
If that works have you tried to disable the firewall temporarily?
2016-11-04 14:11 GMT+01:00 Steffen Nolden
<steffen.nol...@alumni.fh-aachen.de
<mailto:steffen.nol...@alumni.fh-aachen.de>>:
Hello,
i tried to deploy hosted-engine on a testing environment. First of
all i tried to deploy with the option
"Automatically execute engine-setup on the engine appliance on
first boot (Yes, No)[Yes]? Yes"
but it got stuck.
[ INFO ] Running engine-setup on the appliance
[ ERROR ] Engine setup got stuck on the appliance
[ ERROR ] Failed to execute stage 'Closing up': Engine setup is
stalled on the appliance since 600 seconds ago. Please check its
log on the appliance.
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20161104112913.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: this system is not
reliable, please check the issue,fix and redeploy
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20161104110104-kyhq1e.log
Next try i said 'No' and i tried to execute it myself. But i can't
access the engine appliance.
[nolden@oVirtNode01 ~]$ sudo hosted-engine --console
/usr/share/vdsm/vdsClient.py:33: DeprecationWarning: vdscli
uses xmlrpc. since ovirt 3.6 xmlrpc is deprecated, please use
vdsm.jsonrpcvdscli
from vdsm import utils, vdscli, constants
The engine VM is running on this host
Verbunden mit der Domain: HostedEngine
Escape-Zeichen ist ^]
Fehler: Interner Fehler: Charakter-Einheit console0 verwendet
nicht ein PTY
Additionally i can't ping or access the engine appliance via ssh.
Did i forget to install a packege or configure something?
Below my infrastructure and configs. Attached the log file.
Thanks for help.
My infrastructure is a nestedVM system:
All systems have nested visualization activated
HW with LinuxMint x86_64;
- VM with CentOS-7-x86_64; 24GB Ram; 7 cores;
- Nested VM with CentOS-7-x86_64; 12288GB Ram; 4 cores;
Hostname: oVirtNode01.com (192.168.122.101): Here i deploy
hosted-engine, Hostname: oVirtEngine.com (192.168.122.201)
- Nested VM with CentOS-7-x86_64; 4096GB Ram; 1 cores;
Hostname: oVirtNode02.com (192.168.122.102):
- Nested VM with CentOS-7-x86_64; 4096GB Ram; 1 cores;
Hostname: oVirtNode03.com (192.168.122.103):
All three NestedVMs are updated, have installed the
ovirt-release40.rpm. Additional installed:
screen (4.1.0), ovirt-hosted-engine-setup (2.0.2.2), vdsm-gluster
(4.18.13), bridge-utils (1.5),
vdsm (4.18.13), vdsm-cli (4.18.13), glusterfs-server (3.7.16), samba.
First NestedVM additional installed ovirt-engine-appliance
4.0-20160928.1.el7.centos
The three VMs building a glusterfs volume "engine" 3 replica, with
the options...
Volume Name: engine
Type: Replicate
Volume ID: e92849b7-af3b-4ccd-bd0d-69a5ab3b6214
Status: Started
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: oVirtNode01.com:/gluster/engine/brick1
Brick2: oVirtNode02.com:/gluster/engine/brick1
Brick3: oVirtNode03.com:/gluster/engine/brick1
Options Reconfigured:
auth.allow: 192.168.122.*
storage.owner-gid: 36
storage.owner-uid: 36
performance.readdir-ahead: on
## Session 1 (hosted-engine deploy without automatically execute
engine-setup)
[nolden@oVirtNode01 ~]$ sudo hosted-engine --deploy
/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/storage_backends.py:15:
DeprecationWarning: vdscli uses xmlrpc. since ovirt 3.6 xmlrpc is
deprecated, please use vdsm.jsonrpcvdscli
import vdsm.vdscli
[ INFO ] Stage: Initializing
[ INFO ] Generating a temporary VNC password.
[ INFO ] Stage: Environment setup
During customization use CTRL-D to abort.
Continuing will configure this host for serving as
hypervisor and create a VM where you have to install the engine
afterwards.
Are you sure you want to continue? (Yes, No)[Yes]:
[ INFO ] Hardware supports virtualization
Configuration files: []
Log file:
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20161104123834-chwikf.log
Version: otopi-1.5.2 (otopi-1.5.2-1.el7.centos)
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Generating libvirt-spice certificates
[ INFO ] Stage: Environment customization
--== STORAGE CONFIGURATION ==--
Please specify the storage you would like to use
(glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]: glusterfs
[ INFO ] Please note that Replica 3 support is required for the
shared storage.
Please specify the full shared storage connection path
to use (example: host:/path): oVirtNode01.com:/engine
[ INFO ] GlusterFS replica 3 Volume detected
[ INFO ] Installing on first host
[ INFO ] GlusterFS replica 3 Volume detected
--== SYSTEM CONFIGURATION ==--
--== NETWORK CONFIGURATION ==--
iptables was detected on your computer, do you wish
setup to configure it? (Yes, No)[Yes]: No
Please indicate a pingable gateway IP address
[192.168.122.1]:
Please indicate a nic to set ovirtmgmt bridge on: (eth0)
[eth0]:
--== VM CONFIGURATION ==--
Booting from cdrom on RHEL7 is ISO image based only, as
cdrom passthrough is disabled (BZ760885)
Please specify the device to boot the VM from (choose
disk for the oVirt engine appliance)
(cdrom, disk, pxe) [disk]:
Please specify the console type you would like to use to
connect to the VM (vnc, spice) [vnc]:
[ INFO ] Detecting available oVirt engine appliances
The following appliance have been found on your system:
[1] - The oVirt Engine Appliance image (OVA) -
4.0-20160928.1.el7.centos
[2] - Directly select an OVA file
Please select an appliance (1, 2) [1]:
[ INFO ] Verifying its sha1sum
[ INFO ] Checking OVF archive content (could take a few minutes
depending on archive size)
[ INFO ] Checking OVF XML content (could take a few minutes
depending on archive size)
[WARNING] OVF does not contain a valid image description, using
default.
Would you like to use cloud-init to customize the
appliance on the first boot (Yes, No)[Yes]?
Would you like to generate on-fly a cloud-init ISO image
(of no-cloud type)
or do you have an existing one (Generate,
Existing)[Generate]?
Please provide the FQDN you would like to use for the
engine appliance.
Note: This will be the FQDN of the engine VM you are now
going to launch,
it should not point to the base host or to any other
existing machine.
Engine VM FQDN: (leave it empty to skip): []:
oVirtEngine.com
Automatically execute engine-setup on the engine
appliance on first boot (Yes, No)[Yes]? No
Please provide the domain name you would like to use for
the engine appliance.
Engine VM domain: [com]
Enter root password that will be used for the engine
appliance (leave it empty to skip):
Confirm appliance root password:
The following CPU types are supported by this host:
- model_SandyBridge: Intel SandyBridge Family
- model_Westmere: Intel Westmere Family
- model_Nehalem: Intel Nehalem Family
- model_Penryn: Intel Penryn Family
- model_Conroe: Intel Conroe Family
Please specify the CPU type to be used by the VM
[model_SandyBridge]:
Please specify the number of virtual CPUs for the VM
(Defaults to appliance OVF value): [4]: 3
[WARNING] Minimum requirements for disk size not met
You may specify a unicast MAC address for the VM or
accept a randomly generated default [00:16:3e:2a:82:17]:
Please specify the memory size of the VM in MB (Defaults
to maximum available): [10880]: 8144
How should the engine VM network be configured (DHCP,
Static)[DHCP]? Static
Please enter the IP address to be used for the engine VM
[192.168.122.2]: 192.168.122.201
[ INFO ] The engine VM will be configured to use
192.168.122.201/24 <http://192.168.122.201/24>
Please provide a comma-separated list (max 3) of IP
addresses of domain name servers for the engine VM
Engine VM DNS (leave it empty to skip) [192.168.122.1]:
Add lines for the appliance itself and for this host to
/etc/hosts on the engine VM?
Note: ensuring that this host could resolve the engine
VM hostname is still up to you
(Yes, No)[No] Yes
--== HOSTED ENGINE CONFIGURATION ==--
Enter engine admin password:
Confirm engine admin password:
Enter the name which will be used to identify this host
inside the Administrator Portal [hosted_engine_1]:
Please provide the name of the SMTP server through which
we will send notifications [localhost]:
Please provide the TCP port number of the SMTP server [25]:
Please provide the email address from which
notifications will be sent [root@localhost]:
Please provide a comma-separated list of email addresses
which will get notifications [root@localhost]:
[ INFO ] Stage: Setup validation
--== CONFIGURATION PREVIEW ==--
Bridge interface : eth0
Engine FQDN : oVirtEngine.com
Bridge name : ovirtmgmt
Host address : oVirtNode01
SSH daemon port : 22
Gateway address : 192.168.122.1
Host name for web application : hosted_engine_1
Storage Domain type : glusterfs
Host ID : 1
Image size GB : 10
Storage connection : oVirtNode01.com:/engine
Console type : vnc
Memory size MB : 8144
MAC address : 00:16:3e:2a:82:17
Boot type : disk
Number of CPUs : 3
OVF archive (for disk boot) :
/usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.0-20160928.1.el7.centos.ova
Appliance version :
4.0-20160928.1.el7.centos
CPU Type : model_SandyBridge
Please confirm installation settings (Yes, No)[Yes]:
[ INFO ] Stage: Transaction setup
...
[ INFO ] Stage: Closing up
The following network ports should be opened:
tcp:5900
tcp:5901
tcp:9090
udp:5900
udp:5901
An example of the required configuration for iptables
can be found at:
/etc/ovirt-hosted-engine/iptables.example
In order to configure firewalld, copy the files from
/etc/ovirt-hosted-engine/firewalld to
/etc/firewalld/services
and execute the following commands:
firewall-cmd -service hosted-cockpit
firewall-cmd -service hosted-console
[ INFO ] Creating VM
You can now connect to the VM with the following command:
hosted-engine --console
You can also graphically connect to the VM from your
system with the following command:
remote-viewer vnc://oVirtNode01:5900
Use temporary password "2263CpET" to connect to vnc console.
Please ensure that your Guest OS is properly configured
to support serial console according to your distro documentation.
Follow
http://www.ovirt.org/Serial_Console_Setup#I_need_to_access_the_console_the_old_way
<http://www.ovirt.org/Serial_Console_Setup#I_need_to_access_the_console_the_old_way>
for more info.
If you need to reboot the VM you will need to start it
manually using the command:
hosted-engine --vm-start
You can then set a temporary password using the command:
hosted-engine --add-console-password
Please install and setup the engine in the VM.
You may also be interested in installing
ovirt-guest-agent-common package in the VM.
The VM has been rebooted.
To continue please install oVirt-Engine in the VM
(Follow http://www.ovirt.org/Quick_Start_Guide
<http://www.ovirt.org/Quick_Start_Guide> for more info).
Make a selection from the options below:
(1) Continue setup - oVirt-Engine installation is ready
and ovirt-engine service is up
(2) Abort setup
(3) Power off and restart the VM
(4) Destroy VM and abort setup
(1, 2, 3, 4)[1]:
## Session 2
[nolden@oVirtNode01 ~]$ sudo hosted-engine --console
/usr/share/vdsm/vdsClient.py:33: DeprecationWarning: vdscli uses
xmlrpc. since ovirt 3.6 xmlrpc is deprecated, please use
vdsm.jsonrpcvdscli
from vdsm import utils, vdscli, constants
The engine VM is running on this host
Verbunden mit der Domain: HostedEngine
Escape-Zeichen ist ^]
Fehler: Interner Fehler: Charakter-Einheit console0 verwendet
nicht ein PTY
[nolden@oVirtNode01 ~]$ ssh r...@ovirtengine.com
ssh: connect to host ovirtengine.com <http://ovirtengine.com> port
22: No route to host
## Back to session 1
...
(1, 2, 3, 4)[1]: 1
Checking for oVirt-Engine status at oVirtEngine.com...
[ INFO ] Engine is still unreachable
oVirt-Engine health status page is not yet reachable.
The VM has been rebooted.
To continue please install oVirt-Engine in the VM
(Follow http://www.ovirt.org/Quick_Start_Guide
<http://www.ovirt.org/Quick_Start_Guide> for more info).
Make a selection from the options below:
(1) Continue setup - oVirt-Engine installation is ready
and ovirt-engine service is up
(2) Abort setup
(3) Power off and restart the VM
(4) Destroy VM and abort setup
(1, 2, 3, 4)[1]: 2
[ ERROR ] Failed to execute stage 'Closing up': Setup aborted by user
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20161104130223.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: this system is not
reliable, please check the issue,fix and redeploy
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20161104123834-chwikf.log
_______________________________________________
Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
