Hello , Let me ask some questions: 1. What is the scheduler for your PV ? 2. Have you aligned your PV during the setup 'pvcreate --dataalignment alignment_value device' 3. What is your tuned profile ? Do you use rhgs-random-io from the ftp://ftp.redhat.com/redhat/linux/enterprise/7Server/en/RHS/SRPMS/redhat-storage-server-3.5.0.0-6.el7rhgs.src.rpm ? 4. What is the output of "xfs_info /path/to/your/gluster/brick" ? 5. Are you using Jumbo Frames ? Does your infra support them? Usually MTU of 9k is standard, but some switches and NICs support up to 16k.
All the options for "optimize for virt...." are located at /var/lib/glusterd/groups/virt on each gluster node. Best Regards, Strahil Nikolov В неделя, 28 юни 2020 г., 22:13:09 Гринуич+3, jury cat <shadow.e...@gmail.com> написа: Hello all, I am using Ovirt 4.3.10 on Centos 7.8 with glusterfs 6.9 . My Gluster setup is of 3 hosts in replica 3 (2 hosts + 1 arbiter). All the 3 hosts are Dell R720 with Perc Raid Controller H710 mini(that has maximim throughtout 6Gbs) and with 2×1TB samsumg SSD in RAID 0. The volume is partitioned using LVM thin provision and formated XFS. The hosts have separate 10GE network cards for storage traffic. The Gluster Network is connected to this 10GE network cards and is mounted using Fuse Glusterfs(NFS is disabled).Also Migration Network is activated on the same storage network. The problem is that the 10GE network is not used at full potential by the Gluster. If i do live Migration of Vms i can see speeds of 7GB/s ~ 9GB/s. The same network tests using iperf3 reported 9.9GB/s , these exluding the network setup as a bottleneck(i will not paste all the iperf3 tests here for now). I did not enable all the Volume options from "Optimize for Virt Store", because of the bug that cant set volume cluster.granural-heal to enable(this was fixed in vdsm-4 40, but that is working only on Centos 8 with ovirt 4.4 ) . i whould be happy to know what are all these "Optimize for Virt Store" options, so i can set them manually. The speed on the disk inside the host using dd is b etween 1GB/s to 700Mbs. [root@host1 ~]# dd if=/dev/zero of=test bs=100M count=40 cou nt=80 status=progress 8074035200 bytes (8.1 GB) copied, 11.059372 s, 730 MB/s 80+0 records in 80+0 records out 8388608000 bytes (8.4 GB) copied, 11.9928 s, 699 MB/s The dd write test on the gluster volme inside the host is poor only ~ 120MB/s . During the dd test, if i look at Networks->Gluster network ->Hosts at Tx and Rx the network speed barerly reaches over 1Gbs (~1073 Mbs) out of maximum of 10000 Mbs. dd if=/dev/zero of=/rhev/data-center/mnt/glu sterSD/gluster1.domain.local\: _data/test bs=100M count=80 status=progress 8283750400 bytes (8.3 GB) copied, 71.297942 s, 116 MB/s 80+0 records in 80+0 records out 8388608000 bytes (8.4 GB) copied, 71.9545 s, 117 MB/s I have attached my Gluster volume settings and mount options. Thanks, Emy _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/7BR6TZQ4EXS4SIEHTZN2WJUMBYZHP5GJ/ _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/C6PCFUC5JXVWTN353FZPZF3BZQP35MY5/
