I've run into the following issue with oVirt node on a single host using the
single node hyperconverged wizard:
TASK [gluster.features/roles/gluster_hci : Create the GlusterFS volumes] *******
failed: [ovirt01.syd1.fqdn.com] (item={'volname': 'engine', 'brick':
'/gluster_bricks/engine/engine', 'arbiter': 0}) => {"ansible_loop_var": "item",
"changed": true, "cmd": "gluster volume create engine replica
__omit_place_holder__2e79c54ac7e0f34125a3ed6965d6de550953524f transport tcp
ovirt01.syd1.fqdn.com:/gluster_bricks/engine/engine force\n", "delta":
"0:00:00.086880", "end": "2022-05-18 10:28:49.211929", "item": {"arbiter": 0,
"brick": "/gluster_bricks/engine/engine", "volname": "engine"}, "msg":
"non-zero return code", "rc": 1, "start": "2022-05-18 10:28:49.125049",
"stderr": "replica count should be greater than 1\n\nUsage:\nvolume create
<NEW-VOLNAME> [[replica <COUNT> [arbiter <COUNT>]]|[replica 2 thin-arbiter 1]]
[disperse [<COUNT>]] [disperse-data <COUNT>] [redundancy <COUNT>] [transport
<tcp|rdma|tcp,rdma>] <NEW-BRICK> <TA-BRICK>... [force]", "stderr_lines":
["replica count should be greater than 1", "", "Usage:", "volume create
<NEW-VOLNAME> [[replica <COUNT> [arbiter
<COUNT>]]|[replica 2 thin-arbiter 1]] [disperse [<COUNT>]] [disperse-data
<COUNT>] [redundancy <COUNT>] [transport <tcp|rdma|tcp,rdma>] <NEW-BRICK>
<TA-BRICK>... [force]"], "stdout": "", "stdout_lines": []}
failed: [ovirt01.syd1.fqdn.com] (item={'volname': 'data', 'brick':
'/gluster_bricks/data/data', 'arbiter': 0}) => {"ansible_loop_var": "item",
"changed": true, "cmd": "gluster volume create data replica
__omit_place_holder__2e79c54ac7e0f34125a3ed6965d6de550953524f transport tcp
ovirt01.syd1.fqdn.com:/gluster_bricks/data/data force\n", "delta":
"0:00:00.088490", "end": "2022-05-18 10:28:49.905458", "item": {"arbiter": 0,
"brick": "/gluster_bricks/data/data", "volname": "data"}, "msg": "non-zero
return code", "rc": 1, "start": "2022-05-18 10:28:49.816968", "stderr":
"replica count should be greater than 1\n\nUsage:\nvolume create <NEW-VOLNAME>
[[replica <COUNT> [arbiter <COUNT>]]|[replica 2 thin-arbiter 1]] [disperse
[<COUNT>]] [disperse-data <COUNT>] [redundancy <COUNT>] [transport
<tcp|rdma|tcp,rdma>] <NEW-BRICK> <TA-BRICK>... [force]", "stderr_lines":
["replica count should be greater than 1", "", "Usage:", "volume create
<NEW-VOLNAME> [[replica <COUNT> [arbiter <COUNT>]]|[replic
a 2 thin-arbiter 1]] [disperse [<COUNT>]] [disperse-data <COUNT>] [redundancy
<COUNT>] [transport <tcp|rdma|tcp,rdma>] <NEW-BRICK> <TA-BRICK>... [force]"],
"stdout": "", "stdout_lines": []}
failed: [ovirt01.syd1.fqdn.com] (item={'volname': 'vmstore', 'brick':
'/gluster_bricks/vmstore/vmstore', 'arbiter': 0}) => {"ansible_loop_var":
"item", "changed": true, "cmd": "gluster volume create vmstore replica
__omit_place_holder__2e79c54ac7e0f34125a3ed6965d6de550953524f transport tcp
ovirt01.syd1.fqdn.com:/gluster_bricks/vmstore/vmstore force\n", "delta":
"0:00:00.086626", "end": "2022-05-18 10:28:50.604015", "item": {"arbiter": 0,
"brick": "/gluster_bricks/vmstore/vmstore", "volname": "vmstore"}, "msg":
"non-zero return code", "rc": 1, "start": "2022-05-18 10:28:50.517389",
"stderr": "replica count should be greater than 1\n\nUsage:\nvolume create
<NEW-VOLNAME> [[replica <COUNT> [arbiter <COUNT>]]|[replica 2 thin-arbiter 1]]
[disperse [<COUNT>]] [disperse-data <COUNT>] [redundancy <COUNT>] [transport
<tcp|rdma|tcp,rdma>] <NEW-BRICK> <TA-BRICK>... [force]", "stderr_lines":
["replica count should be greater than 1", "", "Usage:", "volume create
<NEW-VOLNAME> [[replica <COUNT>
[arbiter <COUNT>]]|[replica 2 thin-arbiter 1]] [disperse [<COUNT>]]
[disperse-data <COUNT>] [redundancy <COUNT>] [transport <tcp|rdma|tcp,rdma>]
<NEW-BRICK> <TA-BRICK>... [force]"], "stdout": "", "stdout_lines": []}
The only non-default settings I changed were the stripe size and number of
disks. Following the steps here:
https://www.ovirt.org/dropped/gluster-hyperconverged/chap-Single_node_hyperconverged.html
Any ideas to work around this? I will be deploying to 6 nodes eventually but
wanted to try out the engine before the rest of my hardware arrives :)
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/M3HBNBFFNUVZSI7P7ZNB6VMQEPMSWIID/
