Hi again, I just removed qpid 0.28 and replaced it with 0.30; the error persists. Furthermore, in the last mail I forgot to say that I am using AMQP 1.0.
Cheers, Daniel 2015-01-28 17:04 GMT+01:00 Daniel Wenske <[email protected]>: > Hi everyone, > > currently I am running into a rather weird error: For some messages, the > following happens. When I send the message to my broker, in some cases it > comes out as planned at the receiver, while sometimes I run into an > connection error: > > Caught exception in state: 3 with event: 1: Error on input: connection > error > > (/home/daniel/devel/install/QPID_0.28/qpid-0.28/cpp/src/qpid/messaging/amqp/ConnectionContext.cpp:717) > > After "export PN_TRACE_FTM=1" the following is shown at the receiving end > (at instances of the same application reading from the same queue): > > [0x1d76fe0]:0 -> @flow(19) [next-incoming-id=3, > incoming-window=2147483647, next-outgoing-id=0, outgoing-window=0, > handle=4, delivery-count=3, link-credit=10, drain=false] > [0x1d76fe0]:0 -> @close(24) [error=@error(29) > [condition=:"amqp:connection:framing-error"]] > [0x1d76fe0]:ERROR amqp:connection:framing-error connection aborted > [0x1d76fe0]:ERROR[-2] connection aborted > > [0x1d76fe0]: <- EOS > > While the other one reads the message perfectly: > > [0x1b660e0]:0 <- @transfer(20) [handle=6, delivery-id=3, > delivery-tag=b"\x00\x00\x00\x00", message-format=0, settled=true, > more=false] (1809) "\x00Sp\xc0\x06\x04BP\x00@A > \x00Ss\xd0\x00\x00\x00(\x00\x00\x00\x07@ > \xa0\x00\xa1\x11test.topictopi.aa\xa1\x00@@\xa3\x08amqp/map\x00St\xc1\x01\x00\x00Sw\xd1\x00\x00\x06\xc8\x00\x00\x00\x14\xa1\x04BSRC\xa0\x07xxxxxXX\xa1\x04BTGT\xa0\x01-\xa1\x07CREATED\xa0\x1320150128_162338.696\xa1\x04MTYP > ... (truncated) > > To me, it seems totally random if this kind of message is read by one, > both or none or the reading instances. If I only run one reader I can get > it to run into the error after sending the same message three or four times > (max.). > > The message content is long but not overly so (~2000k) and is plain ASCII > only. > > If it helps: i have access to the broker logs, although I might need a > pointer on what to look for since they are _quite_ large. > > Thanks in advance & have a very nice day :-) > > Daniel >
