You mentioned ActiveMQ, was that just in relation to its particular syntax or are you also using the broker with the routers? Essentially, can you clarify if the setup is router-only or not? What are your address[ + linkRoute + autoLink] settings like generally on the routers currently? That might help someone with more knowledge answer better.
(I think the answer is that the router does not support 'topic like' wildcard subscriptions on its own directly, but could perhaps together with a broker that does) On Mon, 12 Oct 2020 at 15:44, Petrenko, Vadim <[email protected]> wrote: > > Dear Qpid developers, > > We have a mesh of interior routers with an incoming edge router and an > outgoing edge router. > We would like to send messages to several different topics on the incoming > edge router, e.g.: > > topic1.sensor1 > topic1.sensor2 > topic1.sensor3 > > And then consume messages from all sensors using wildcards in the topic name > on the outgoing edge router, e.g.: topic1.* > So that a single receiver would receive all messages sent to the above 3 > topics. > > We have tried different combinations, like # instead of * and other > possibilities existing in ActiveMQ, but to no avail. > > Is this something Qpid supports? I’ve seen a section in the docs about using > wildcards, but it looks more related to configuring routers. > Could you please clarify this? > > Thank you in advance. > > > ________________________________ > > Deze e-mail, inclusief eventuele bijlagen, is uitsluitend bestemd voor > (gebruik door) de geadresseerde. De e-mail kan persoonlijke of vertrouwelijke > informatie bevatten. Openbaarmaking, vermenigvuldiging, verspreiding en/of > verstrekking van (de inhoud van) deze e-mail (en eventuele bijlagen) aan > derden is uitdrukkelijk niet toegestaan. Indien u niet de bedoelde > geadresseerde bent, wordt u vriendelijk verzocht degene die de e-mail verzond > hiervan direct op de hoogte te brengen en de e-mail (en eventuele bijlagen) > te vernietigen. > > Informatie vennootschap<http://www.ns.nl/emaildisclaimer> --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
