It's a debian/ubuntu issue thinking it has a second adapter now.

ubuntu new adapter wrong eth /etc/udev/rules.d/70-persistent-net.rules remove all ethX lines save reboot
Steve
On 3/10/2014 7:30 AM, Andy Tuinman wrote:

You can login on the terminal of the physical machine (plug in a monitor on that machine). You don't need an ip for that. Or can you tell how the structure is. Is it a vm on an accessible pc or is it a physical machine?

Op 10 mrt. 2014 12:48 schreef "John" <jo...@ch.steiner.school.nz <mailto:jo...@ch.steiner.school.nz>>:

    Hi Andy
    Thanks for your reply. I have been out of circulation for a few
    days with floods and illness.

    I can't log on to sogo on my server as it has no gui interface,
    and hence no terminal access to sogo, and I can't ssh because
    don't know the ip.

    I have subsequently tried installing sogo on my (ubuntu) laptop
    with gui.

    It initially complained that there was no adapter en0, so I
    changed it in the settings to eth0 (I had already tried this on my
    headless server install).

    This allowed the sogo vm to start.

    However it came up with the Start using... from
    http://172.20.20.222. I have no idea where it got this from. My
    network issues ips in the range 192.168.0.1-255.

    Thinking it may have been because it initially did not have the
    correct adapter setting, I rebooted it. This time it got stuck at
    setting up network settings with - Waiting for network
    configuration...
    Waiting up to 60 more seconds for network configuration and then...
    Booting system without full network configuration...
    And then when it came up it had - Start using your ZEG..... from
    http:///  - no ip at all.

    Any further help greatly appreciated!

    Regards
    John






    On 05/03/14 19:43, Andy Tuinman wrote:

    Go to your physical sogo server.
    In that server you can login as sogo with password sogo.
    Then you enter ifconfig.
    Now you can look for your ip address.

    Op 5 mrt. 2014 01:17 schreef "John" <jo...@ch.steiner.school.nz
    <mailto:jo...@ch.steiner.school.nz>>:

        Hi all

        I am fully new to this.

        I have installed the sogo vm on my ubuntu server. This server
        does not have a gui. I do not know how to connect to this
        device. It does not appear in my (Windows 2008) DNS, so I do
        not have an IP for it!

        Any ideas?

        Thanks

        John

-- users@sogo.nu <mailto:users@sogo.nu>
        https://inverse.ca/sogo/lists


-- John
    --------------------------------------------------------
    "Let the refining and improving of your own life keep you so busy that you 
have little time to criticize others.
    --H. Jackson Brown, Jr."


--
users@sogo.nu
https://inverse.ca/sogo/lists

Reply via email to