Continuing evidence of local-level conversion in CA.... #1 Santa-Cruz county
http://sccounty01.co.santa-cruz.ca.us/bds/board/20020625/054.pdf AGENDA: JUNE 25,2002 June 13,2002 SANTA CRUZ COUNTY BOARD OF SUPERVISORS 701 Ocean Street Santa Cruz, California 95060 SUBJECT: 2002 TRAFFIC SIGNAL DESIGN AND SIGNAL MODIFICATION PROJECT Task 2.0 - Preparation of Plans, Specifications, and Estimates DKS will prepare one set of plans, specifications and estimates for the construction of the three new signals and for the signal modification project. The plans set may be separated into two sets given the optional task below. The County will give authorization to separate or combine the two plans sets before the start of Task 2.0. The design will employ the signal type and control equipment as approved by the County of Santa Cruz in the concept design stage. The plans will be prepared in Metric units unless otherwise directed by the County. #2 Ventura county... http://www.ventura.org/vcpwa/wre/es/projects/pdf/vcss.pdf 1-4.1 General. The International System of Units, also referred to as SI or the metric system, is the principal measurement system in these Specifications and shall be used for construction, unless otherwise stated in the Contract Documents. U. S. Standard Measure, also called U. S. Customary System, are included in parenthesis. SI units and U. S. Standard Measure in parenthesis may or may not be exactly equivalent. If U. S. Standard Measures are specified for use in the Contract Documents, then all values used for construction shall be U. S. Standard Measures shown in parentheses. However, certain material Specifications and test requirements contained herein use SI units specifically and conversions to U. S. Measures have not been included in these circumstances. When U. S. Standard Measures are not included in parentheses, the SI units shall control. Reference is also made to ASTM E 380 for definitions of various units of the SI system and a more extensive set of conversion factors. #3 City of Brentwood... http://www.ci.brentwood.ca.us/boards/planning/planpastagendas/plan_agenda_20 01/packet010918/item6.cfm DATE OF NOTICE: April 26, 2001, and August 30, 2001... 2. Final Maps shall be submitted, in metric, to the City for review and approval. Maps shall be prepared, wet signed and sealed by a civil engineer or land surveyor, registered in the State of California and licensed to prepare final maps.
