Alternatively, upgrade your FPGA image to use the latest DDC code. Run uhd_image_downloader to get the latest image or build your own from the uhd fpga repo. Best, Ryan Marlow
Date: Fri, 19 Jan 2018 16:13:47 +0000 > From: Disco Daniele <[email protected]> > To: "[email protected]" <[email protected]> > Subject: [USRP-users] x310 ddc error > Message-ID: <[email protected]> > Content-Type: text/plain; charset="iso-8859-1" > > HI! > > Today I installed in a new pc the UHD software. > > > Connecting the X310 to the pc via Ethernet, the output of uhd_usrp_probe > is: > > > > > [INFO] [UHDlinux; GNU C++ version 5.4.0 20160609; Boost_105800; > UHD_3.11.0.git-0-unknown] > [INFO] [X300] X300 initialization sequence... > [INFO] [X300] Determining maximum frame size... > [INFO] [X300] Maximum frame size: 1472 bytes. > [INFO] [X300] Setup basic communication... > [INFO] [X300] Loading values from EEPROM... > [INFO] [X300] Setup RF frontend clocking... > [INFO] [X300] Radio 1x clock:200 > [INFO] [RFNOC DMA FIFO] Running BIST for FIFO 0... > [INFO] [RFNOC DMA FIFO] BIST passed (Throughput: 0 MB/s) > [INFO] [RFNOC DMA FIFO] Running BIST for FIFO 1... > [INFO] [RFNOC DMA FIFO] BIST passed (Throughput: 0 MB/s) > [INFO] [RFNOC RADIO] Register loopback test passed > [INFO] [RFNOC RADIO] Register loopback test passed > [INFO] [RFNOC RADIO] Register loopback test passed > [INFO] [RFNOC RADIO] Register loopback test passed > Error: RuntimeError: DDC software is too new for this hardware. Please > downgrade to a driver that supports hardware revision 0. > > > The question is: if I upgrade the sw of the FPGA I will solve the issue or > I have to install a version older of the UHD? > > > If the problem is related to the UHD sw, wich version I have to use? > > Thank you for the support > > Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle > persone indicate. La diffusione, copia o qualsiasi altra azione derivante > dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora > abbiate ricevuto questo documento per errore siete cortesemente pregati di > darne immediata comunicazione al mittente e di provvedere alla sua > distruzione, Grazie. > > This e-mail and any attachments is confidential and may contain privileged > information intended for the addressee(s) only. Dissemination, copying, > printing or use by anybody else is unauthorised. If you are not the > intended recipient, please delete this message and any attachments and > advise the sender by return e-mail, Thanks. > > Rispetta l'ambiente. Non stampare questa mail se non ? necessario. > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: <http://lists.ettus.com/pipermail/usrp-users_lists. > ettus.com/attachments/20180119/a424efe9/attachment-0001.html> > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > > ------------------------------ > > End of USRP-users Digest, Vol 89, Issue 16 > ****************************************** >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
