Hello Rob: This capability is not supported with the multi_usrp API on the X300, X310, N310.
It was supported on the N200/N210. https://files.ettus.com/manual/page_usrp2.html#usrp2_altstream However, this capability is supported for the X300, X310, N310 using the RFNoC API. --Neel Pandeya 408-610-6370 On 7 May 2018 at 15:55, Rob Kossler via USRP-users < usrp-users@lists.ettus.com> wrote: > Hi, > I am using UHD from a custom c++ application and I would like to control > the USRP from one port and send the Rx streaming samples to a separate > application at a different IP address using the other USRP SFP port. I > found in the documentation for stream_args_t that there are "port" and > "addr" args that can be set to send the streaming to an alternate > destination. > > When I specify these args, I am not seeing traffic on the specified > addr/port. This occurs using an N310. I would like this functionality to > work for both X310 and N310. I am wondering if I am missing a step or > two. Please let me know. > > Rob > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
