Yes, I’m seeing the same behavior with a standard image as with my custom image.
Jason > On Sep 27, 2018, at 8:31 PM, Marcus D. Leech <mle...@ripnet.com> wrote: > >> On 09/27/2018 07:09 PM, Jason Meyer wrote: >> The command produces output as if there is no issue. It shows the progress >> of the image being loaded, and at the end states that the process was a >> success and to power-cycle to see the changes made. However when I >> power-cycle, I am unable to communicate with the USRP until I load the FPGA >> image via JTAG. This has happened with 3 different USRPs. >> >> >> Jason > Does the "cannot communicate with the device" happen even after loading a > standard image? > > >> >>> On Thu, Sep 27, 2018 at 6:40 PM Marcus D. Leech >>> <mle...@ripnet.com> wrote: >>>> On 09/27/2018 06:34 PM, Jason Meyer wrote: >>>> Hi Marcus, >>>> >>>> I am using UHD v3.11.1.0. The command format I've used is: >>>> >>>> uhd_image_loader --args="type=x300,addr=192.168.10.2" >>>> --fpga-path="/usr/local/share/uhd/images/<fpga_image>.bit" >>>> >>> Does the command produce any output? >>> >>> How are you confirming that it's reverting to a previous image? >>> >>> Except for broken hardware, this should "just work". But you've mentioned >>> the same behavior on multiple X310s. >>> >>> >>>> >>>> >>>> Jason >>>> >>>>> On Thu, Sep 27, 2018 at 5:28 PM Marcus D. Leech via USRP-users >>>>> <usrp-users@lists.ettus.com> wrote: >>>>> On 09/27/2018 03:46 PM, Jason Meyer via USRP-users wrote: >>>>> > Hello, >>>>> > >>>>> > I have been working with multiple X310 USRPs and attempting to load >>>>> > custom FPGA firmware onto the motherboard EEPROM using the >>>>> > uhd_image_loader command. The command appears to be successful, but >>>>> > the FPGA fails to load the image on reboot. The image functions just >>>>> > fine when I program it through JTAG and Vivado Hardware Manager, but I >>>>> > would like to store it in EEPROM to avoid needing to re-program every >>>>> > time I reboot the radios. The same error has occurred on multiple >>>>> > motherboards, and continues to occur when I use uhd_image_loader to >>>>> > load an image retrieved from uhd_images_downloader. >>>>> > >>>>> > What options do I have for debugging the EEPROM? >>>>> > >>>>> > Thank you, >>>>> > Jason Meyer >>>>> > >>>>> > >>>>> This should "Just Work(tm)" >>>>> >>>>> How exactly are you using uhd_image_loader, and what version of UHD are >>>>> you using? >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> USRP-users mailing list >>>>> USRP-users@lists.ettus.com >>>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com