Dear Users
I am facing problem of phase offset when i change center frequency dynamically
for TwinRX with X310 setup. Here is my C++ code,
Please advise
usrp_source1->set_rx_lo_source("internal",uhd::usrp::multi_usrp::ALL_LOS,0);
usrp_source1->set_rx_lo_source("companion",uhd::usrp::multi_usrp::ALL_LOS,1);
usrp_sourceDOA1->set_command_time(usrp_sourceDOA1->get_time_now() +
uhd::time_spec_t(0.01));
usrp_sourceDOA1->set_center_freq(m_CenterFrequency,0);
usrp_sourceDOA1->set_center_freq(m_CenterFrequency,1);
usrp_sourceDOA1->clear_command_time();
I feel set_command_time is not working properly. When i start the X310 my phase
difference is almost zero but as i change my frequency pjhase difference is
random in nature.
Regards,Arun Verma
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
