Marcus,

In this setup I have 6 UBX-160 v2 and 6 UBX-40 v2.    The USRPs are all X310 Rev 11, Rev_compat 7.   I have tried 3.13.1 as well as 3.14-rc3.


Thanks!

   Mike


On 03/24/2019 03:23 PM, Marcus D. Leech via USRP-users wrote:
On 03/24/2019 02:39 PM, Freedman, Michael - 1008 - MITLL via USRP-users wrote:
It is not just a phase offset. It is a frequency offset. The phase drifts 
between the two. I can tolerate a phase offset at startup. A freq offset 
however is causing problems.

Mike

Sent from my iPhone

On Mar 24, 2019, at 4:28 AM, Marcus Müller<marcus.muel...@ettus.com>  wrote:

Can you elaborate on what "not coherent" means to you – the relative
phase should be constant after each tune, but if you don't tune
simultaneously, i.e. with timed commands, random at each tune.

Best regards,
Marcus
Also, what version of UHD?  What hardware rev of UBX cards?


On Sat, 2019-03-23 at 17:06 -0400, Michael R. Freedman via USRP-users
wrote:
Hello,


I have an issue where I tune both the TX and RX side of a UBX40 card
in
an X310 to the same frequency and find that the transmitted signal
and
what is received are not coherent.  I am using an external 10MHz
reference and have tried the documented suggestions.

at 150MHz it is coherent.

at 155MHz it is NOT coherent.


I have tried setting the dboard_clock_rate to 20MHz.  This made the
problem appear at 150MHz as well.  I've tried integer_n tuning.

I have verified that the ref_lock and lo_lock are both true.


Any suggestions?


Mike


_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com


_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com



_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to