Hi all, I am assembling a few X300s with UBX-160 d/b. One of them is giving me troubles with a UBX-160 v2 d/b. The result from uhd_usrp_probe can be found below. Results from other X300s are normal. We have physically disconnected and reconnected the problematic d/b, but we still have the same results. Is there something else I can try, or should I send the board back for RMA?
Thanks, Serge linux; GNU C++ version 7.3.0; Boost_106501; UHD_003.010.003.v3.10.3.0-0-gef157678 -- X300 initialization sequence... -- Determining maximum frame size... 8000 bytes. -- Setup basic communication... -- Loading values from EEPROM... -- Setup RF frontend clocking... -- Radio 1x clock:200 -- [DMA FIFO] Running BIST for FIFO 0... pass (Throughput: 1300.1MB/s) -- [DMA FIFO] Running BIST for FIFO 1... pass (Throughput: 1309.8MB/s) -- [RFNoC Radio] Performing register loopback test... pass -- [RFNoC Radio] Performing register loopback test... pass -- [RFNoC Radio] Performing register loopback test... pass -- [RFNoC Radio] Performing register loopback test... pass -- Performing timer loopback test... pass -- Performing timer loopback test... pass _____________________________________________________ / | Device: X-Series Device | _____________________________________________________ | / | | Mboard: X300 | | revision: 11 | | revision_compat: 7 | | product: 30817 | | mac-addr0: 00:80:2f:24:a1:ee | | mac-addr1: 00:80:2f:24:a1:ef | | gateway: 192.168.10.1 | | ip-addr0: 192.168.10.2 | | subnet0: 255.255.255.0 | | ip-addr1: 192.168.20.2 | | subnet1: 255.255.255.0 | | ip-addr2: 192.168.30.2 | | subnet2: 255.255.255.0 | | ip-addr3: 192.168.40.2 | | subnet3: 255.255.255.0 | | serial: 3185E4E | | FW Version: 5.1 | | FPGA Version: 33.0 | | RFNoC capable: Yes | | | | Time sources: internal, external, gpsdo | | Clock sources: internal, external, gpsdo | | Sensors: ref_locked | | _____________________________________________________ | | / | | | RX Dboard: A | | | ID: UBX-160 v2 (0x007e) | | | Serial: 31853D5 | | | _____________________________________________________ | | | / | | | | RX Frontend: 0 | | | | Name: UBX RX | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 10.000 to 6000.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Codec: A | | | | Name: ads62p48 | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB | | _____________________________________________________ | | / *| | | RX Dboard: B* *| | | _____________________________________________________* *| | | /* *| | | | RX Frontend: 0* *| | | | Name: Unknown (0xffff) - 0* *| | | | Antennas: * *| | | | Sensors: * *| | | | Freq range: 0.000 to 0.000 MHz* *| | | | Gain Elements: None* *| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz* *| | | | Connection Type: IQ* *| | | | Uses LO offset: No* *| | | _____________________________________________________* *| | | /* *| | | | RX Codec: B* *| | | | Name: ads62p48* *| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB* | | _____________________________________________________ | | / | | | TX Dboard: A | | | ID: UBX-160 v2 (0x007d) | | | Serial: 31853D5 | | | _____________________________________________________ | | | / | | | | TX Frontend: 0 | | | | Name: UBX TX | | | | Antennas: TX/RX, CAL | | | | Sensors: lo_locked | | | | Freq range: 10.000 to 6000.000 MHz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz | | | | Connection Type: QI | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Codec: A | | | | Name: ad9146 | | | | Gain Elements: None | | _____________________________________________________ | | / *| | | TX Dboard: B* *| | | ID: UBX-160 v2 (0x007d)* *| | | Serial: 31853CC* *| | | _____________________________________________________* *| | | /* *| | | | TX Frontend: 0* *| | | | Name: UBX-160 v2 (0x007d) - 0* *| | | | Antennas: * *| | | | Sensors: * *| | | | Freq range: 0.000 to 0.000 MHz* *| | | | Gain Elements: None* *| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz* *| | | | Connection Type: IQ* *| | | | Uses LO offset: No* *| | | _____________________________________________________* *| | | /* *| | | | TX Codec: B* *| | | | Name: ad9146* *| | | | Gain Elements: None* | | _____________________________________________________ | | / | | | RFNoC blocks on this device: | | | | | | * DmaFIFO_0 | | | * Radio_0 | | | * Radio_1 | | | * DDC_0 | | | * DDC_1 | | | * DUC_0 | | | * DUC_1
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
