Hello Marcus, Thanks for your answer. Unless anybody else from Ettus has another suggestion today, I will contact orders@ettus.comto get a RMA number
Serge Le jeu. 11 avr. 2019, à 13 h 12, Marcus D. Leech <patchvonbr...@gmail.com> a écrit : > On 04/11/2019 01:09 PM, Serge Malo wrote: > > Hello Marcus, > > We swapepd the d/b of our X300, and the problem followed the d/b. > See below the results of uhd_usrp_probe. > > Could it "simply" be a corrupted or badly programmed eeprom? > > Thanks, > Serge > > My inclination would be to return it under RMA. > > > > > inux; GNU C++ version 7.3.0; Boost_106501; > UHD_003.010.003.v3.10.3.0-0-gef157678 > > -- X300 initialization sequence... > -- Determining maximum frame size... 8000 bytes. > -- Setup basic communication... > -- Loading values from EEPROM... > -- Setup RF frontend clocking... > -- Radio 1x clock:200 > -- Detecting internal GPSDO.... No GPSDO found > -- [DMA FIFO] Running BIST for FIFO 0... pass (Throughput: 1298.9MB/s) > -- [DMA FIFO] Running BIST for FIFO 1... pass (Throughput: 1301.2MB/s) > -- [RFNoC Radio] Performing register loopback test... pass > -- [RFNoC Radio] Performing register loopback test... pass > -- [RFNoC Radio] Performing register loopback test... pass > -- [RFNoC Radio] Performing register loopback test... pass > -- Performing timer loopback test... pass > -- Performing timer loopback test... pass > _____________________________________________________ > / > | Device: X-Series Device > | _____________________________________________________ > | / > | | Mboard: X300 > | | revision: 11 > | | revision_compat: 7 > | | product: 30817 > | | mac-addr0: 00:80:2f:24:a1:ee > | | mac-addr1: 00:80:2f:24:a1:ef > | | gateway: 192.168.10.1 > | | ip-addr0: 192.168.10.2 > | | subnet0: 255.255.255.0 > | | ip-addr1: 192.168.20.2 > | | subnet1: 255.255.255.0 > | | ip-addr2: 192.168.30.2 > | | subnet2: 255.255.255.0 > | | ip-addr3: 192.168.40.2 > | | subnet3: 255.255.255.0 > | | serial: 3185E4E > | | FW Version: 5.1 > | | FPGA Version: 33.0 > | | RFNoC capable: Yes > | | > | | Time sources: internal, external, gpsdo > | | Clock sources: internal, external, gpsdo > | | Sensors: ref_locked > | | _____________________________________________________ > | | / > *| | | RX Dboard: A* > *| | | _____________________________________________________* > *| | | /* > *| | | | RX Frontend: 0* > *| | | | Name: Unknown (0xffff) - 0* > *| | | | Antennas: * > *| | | | Sensors: * > *| | | | Freq range: 0.000 to 0.000 MHz* > *| | | | Gain Elements: None* > *| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz* > *| | | | Connection Type: IQ* > *| | | | Uses LO offset: No* > *| | | _____________________________________________________* > *| | | /* > *| | | | RX Codec: A* > *| | | | Name: ads62p48* > *| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB* > | | _____________________________________________________ > | | / > | | | RX Dboard: B > | | | ID: UBX-160 v2 (0x007e) > | | | Serial: 31853D5 > | | | _____________________________________________________ > | | | / > | | | | RX Frontend: 0 > | | | | Name: UBX RX > | | | | Antennas: TX/RX, RX2, CAL > | | | | Sensors: lo_locked > | | | | Freq range: 10.000 to 6000.000 MHz > | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB > | | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz > | | | | Connection Type: IQ > | | | | Uses LO offset: No > | | | _____________________________________________________ > | | | / > | | | | RX Codec: B > | | | | Name: ads62p48 > | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB > | | _____________________________________________________ > | | / > *| | | TX Dboard: A* > *| | | ID: UBX-160 v2 (0x007d)* > *| | | Serial: 31853CC* > *| | | _____________________________________________________* > *| | | /* > *| | | | TX Frontend: 0* > *| | | | Name: UBX-160 v2 (0x007d) - 0* > *| | | | Antennas: * > *| | | | Sensors: * > *| | | | Freq range: 0.000 to 0.000 MHz* > *| | | | Gain Elements: None* > *| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz* > *| | | | Connection Type: IQ* > *| | | | Uses LO offset: No* > *| | | _____________________________________________________* > *| | | /* > *| | | | TX Codec: A* > *| | | | Name: ad9146* > *| | | | Gain Elements: None* > | | _____________________________________________________ > | | / > | | | TX Dboard: B > | | | ID: UBX-160 v2 (0x007d) > | | | Serial: 31853D5 > | | | _____________________________________________________ > | | | / > | | | | TX Frontend: 0 > | | | | Name: UBX TX > | | | | Antennas: TX/RX, CAL > | | | | Sensors: lo_locked > | | | | Freq range: 10.000 to 6000.000 MHz > | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB > | | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz > | | | | Connection Type: QI > | | | | Uses LO offset: No > | | | _____________________________________________________ > | | | / > | | | | TX Codec: B > | | | | Name: ad9146 > | | | | Gain Elements: None > | | _____________________________________________________ > | | / > | | | RFNoC blocks on this device: > | | | > | | | * DmaFIFO_0 > | | | * Radio_0 > | | | * Radio_1 > | | | * DDC_0 > | | | * DDC_1 > | | | * DUC_0 > | | | * DUC_1 > > > > Le jeu. 11 avr. 2019, à 11 h 29, Marcus D. Leech via USRP-users < > usrp-users@lists.ettus.com> a écrit : > >> On 04/11/2019 10:40 AM, Serge Malo via USRP-users wrote: >> >> Hi all, >> >> I am assembling a few X300s with UBX-160 d/b. One of them is giving me >> troubles with a UBX-160 v2 d/b. The result from uhd_usrp_probe can be found >> below. >> Results from other X300s are normal. >> We have physically disconnected and reconnected the problematic d/b, but >> we still have the same results. >> Is there something else I can try, or should I send the board back for >> RMA? >> >> Thanks, >> Serge >> >> If you use one of the other, known-to-work DBs in this "problematic" >> X310, does it work? >> >> Just trying to distinguish the case where the slot in the X310 is bad, vs >> bad daughterboard. >> >> linux; GNU C++ version 7.3.0; Boost_106501; >> UHD_003.010.003.v3.10.3.0-0-gef157678 >> >> -- X300 initialization sequence... >> -- Determining maximum frame size... 8000 bytes. >> -- Setup basic communication... >> -- Loading values from EEPROM... >> -- Setup RF frontend clocking... >> -- Radio 1x clock:200 >> -- [DMA FIFO] Running BIST for FIFO 0... pass (Throughput: 1300.1MB/s) >> -- [DMA FIFO] Running BIST for FIFO 1... pass (Throughput: 1309.8MB/s) >> -- [RFNoC Radio] Performing register loopback test... pass >> -- [RFNoC Radio] Performing register loopback test... pass >> -- [RFNoC Radio] Performing register loopback test... pass >> -- [RFNoC Radio] Performing register loopback test... pass >> -- Performing timer loopback test... pass >> -- Performing timer loopback test... pass >> _____________________________________________________ >> / >> | Device: X-Series Device >> | _____________________________________________________ >> | / >> | | Mboard: X300 >> | | revision: 11 >> | | revision_compat: 7 >> | | product: 30817 >> | | mac-addr0: 00:80:2f:24:a1:ee >> | | mac-addr1: 00:80:2f:24:a1:ef >> | | gateway: 192.168.10.1 >> | | ip-addr0: 192.168.10.2 >> | | subnet0: 255.255.255.0 >> | | ip-addr1: 192.168.20.2 >> | | subnet1: 255.255.255.0 >> | | ip-addr2: 192.168.30.2 >> | | subnet2: 255.255.255.0 >> | | ip-addr3: 192.168.40.2 >> | | subnet3: 255.255.255.0 >> | | serial: 3185E4E >> | | FW Version: 5.1 >> | | FPGA Version: 33.0 >> | | RFNoC capable: Yes >> | | >> | | Time sources: internal, external, gpsdo >> | | Clock sources: internal, external, gpsdo >> | | Sensors: ref_locked >> | | _____________________________________________________ >> | | / >> | | | RX Dboard: A >> | | | ID: UBX-160 v2 (0x007e) >> | | | Serial: 31853D5 >> | | | _____________________________________________________ >> | | | / >> | | | | RX Frontend: 0 >> | | | | Name: UBX RX >> | | | | Antennas: TX/RX, RX2, CAL >> | | | | Sensors: lo_locked >> | | | | Freq range: 10.000 to 6000.000 MHz >> | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB >> | | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz >> | | | | Connection Type: IQ >> | | | | Uses LO offset: No >> | | | _____________________________________________________ >> | | | / >> | | | | RX Codec: A >> | | | | Name: ads62p48 >> | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB >> | | _____________________________________________________ >> | | / >> *| | | RX Dboard: B* >> *| | | _____________________________________________________* >> *| | | /* >> *| | | | RX Frontend: 0* >> *| | | | Name: Unknown (0xffff) - 0* >> *| | | | Antennas: * >> *| | | | Sensors: * >> *| | | | Freq range: 0.000 to 0.000 MHz* >> *| | | | Gain Elements: None* >> *| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz* >> *| | | | Connection Type: IQ* >> *| | | | Uses LO offset: No* >> *| | | _____________________________________________________* >> *| | | /* >> *| | | | RX Codec: B* >> *| | | | Name: ads62p48* >> *| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB* >> | | _____________________________________________________ >> | | / >> | | | TX Dboard: A >> | | | ID: UBX-160 v2 (0x007d) >> | | | Serial: 31853D5 >> | | | _____________________________________________________ >> | | | / >> | | | | TX Frontend: 0 >> | | | | Name: UBX TX >> | | | | Antennas: TX/RX, CAL >> | | | | Sensors: lo_locked >> | | | | Freq range: 10.000 to 6000.000 MHz >> | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB >> | | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz >> | | | | Connection Type: QI >> | | | | Uses LO offset: No >> | | | _____________________________________________________ >> | | | / >> | | | | TX Codec: A >> | | | | Name: ad9146 >> | | | | Gain Elements: None >> | | _____________________________________________________ >> | | / >> *| | | TX Dboard: B* >> *| | | ID: UBX-160 v2 (0x007d)* >> *| | | Serial: 31853CC* >> *| | | _____________________________________________________* >> *| | | /* >> *| | | | TX Frontend: 0* >> *| | | | Name: UBX-160 v2 (0x007d) - 0* >> *| | | | Antennas: * >> *| | | | Sensors: * >> *| | | | Freq range: 0.000 to 0.000 MHz* >> *| | | | Gain Elements: None* >> *| | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz* >> *| | | | Connection Type: IQ* >> *| | | | Uses LO offset: No* >> *| | | _____________________________________________________* >> *| | | /* >> *| | | | TX Codec: B* >> *| | | | Name: ad9146* >> *| | | | Gain Elements: None* >> | | _____________________________________________________ >> | | / >> | | | RFNoC blocks on this device: >> | | | >> | | | * DmaFIFO_0 >> | | | * Radio_0 >> | | | * Radio_1 >> | | | * DDC_0 >> | | | * DDC_1 >> | | | * DUC_0 >> | | | * DUC_1 >> >> >> >> >> _______________________________________________ >> USRP-users mailing >> listUSRP-users@lists.ettus.comhttp://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
