Hi all,
I have recently acquired a USRP E312 and have been following the
quickstart guide at: -
https://kb.ettus.com/Software_Development_on_the_E310_and_E312
The relevant commands being: -
$ sudo pip install git+https://github.com/gnuradio/pybombs.git
$ pybombs recipes add gr-recipes
git+https://github.com/gnuradio/gr-recipes.git
$ pybombs recipes add ettus
https://github.com/EttusResearch/ettus-pybombs.git
$ sudo dpkg-reconfigure dash # select NO
$ pybombs prefix init ~/prefix -R e3xx-rfnoc -a e300
Everything proceeds well up until the CMake is carried out at which it
complains that the installed version of CMake is below the minimum. The
output log is : -
1511750 kB / 1511750 kB
(100%))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
[INFO] Installing SDK
`e3xx-release4-sdk'))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
The directory "/home/david/prefix" already contains a SDK for this
architecture.)))))))))))))))))))
If you continue, existing files will be overwritten!
Proceed[y/N]?Y))))))))))))))))))))))))))))))))))))))Extracting
SDK...done))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
Setting it
up...done)))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
SDK has been successfully set up and is ready to be
used.))))))))))))))))))))))))))))))))))))))))))))))))
[INFO] Cleaning up
files...))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
[INFO] Prefix Python version is:
2.7.15))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
[INFO] Installing default packages for
prefix...)))))))))))))))))))))))))))))))))))))))))))))))))))))))))
[INFO]
))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
- uhd)))))))))))))))))))))
- gnuradio
- gr-ettus
[INFO] Install python-apt to speed up apt processing.
[INFO] Phase 1: Creating install tree and installing binary packages:
Install tree:
|
\- gr-ettus
|
+- uhd
|
\- gnuradio
|
\- uhd
[INFO] Phase 1 complete: All binary dependencies installed.
[INFO] Phase 2: Recursively installing source packages to prefix:
[INFO] Installing package: uhd
[WARNING] A source build for package uhd was requested, but binary
install was found!
Install uhd from source despite binary install available Y/[N]?
[INFO] Install python-apt to speed up apt processing.
[WARNING] Build dir already exists: /home/david/prefix/src/uhd/host/build
Configuring: (100%)
[==================================================================================]
[WARNING] Configuration failed. Re-trying with higher verbosity.
CMake Error at CMakeLists.txt:13 (cmake_minimum_required):
CMake 3.5.1 or higher is required. You are running version 2.8.12.2
-- Configuring incomplete, errors occurred!
Running cmake --version on my system shows: -
cmake version 3.10.2
CMake suite maintained and supported by Kitware (kitware.com/cmake).
I have no idea why pybombs thinks I am running cmake 2.8. I have
searched online and can find no reference to the issue. Has anyone else
encountered this issue or does anyone know of a solution?
Thanks,
David
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com